0735912102

9 8 7 6 5 4 3 2 1 RECOMMENDED LAND PATTERN : Zone A must be attached to heat sink. Thermal conductivity of intermediate layers between Zone A and heat sink must be better than 0.1 W / [°C x mm]. E 128° 12.25 [.482] E 12.25 [.482] 28.0 [1.102] 7.7 [.303] 24.5 [.965] .50 [.020] 13.6 [.537] .1[.002] 6.00 [.236] molex 1 2 0735912102 6.0 [.236] 1.5[.0059] MIN Ø1.30 [.051] 2PL Ø9.0 [Ø.354] Ø2.50 [Ø.098] Solder Pad 2PL R11.50 [R.453] D Ø20.4 [Ø.801] 19.0 [.748] Ø2.0 [Ø.079] THRU 3PL 19.0 [.748] Ø23.4 [Ø.921] D R6.50 [R.256] 19.00 [.748] Ø15.0 [Ø.591] ZONE A DATA MATRIX 11.00 [.433] 11.0 [.433] PCB Material : RO 4350B , 20 mil THK C C [ ] 2PL .0+0.10 .000+0.004 -0.00 -0.000 ELECTRICAL SPECIFICATION : Frequency range : 925 to 960 MHz Input power : 130 W Input power , peak: 2250 W Reflected power : 80 W Isolation (within frequency range, port 2 to 1) : 23 dB Min Return loss (Measured at port 1 and port 2 ) : 23 dB Min (0°C-115°C) (Measured at port 1 and port 2 ) : 20 dB Min (-40°C-0°C) Insertion loss (within frequency range, port 1 to 2 ) : 0.20 dB Max Intermodulation distortion, IM3(2 x 50 W) : -69 dBc Max IM5(2 x 50 W) : -79 dBc Max Harmonics: 2 x f (100W CW) : 0 dBm Max 3-4 x f (100W CW) :-10 dBm Max 5 x f (100W CW) :-35 dBm Max 6 x f (100W CW) :-25 dBm Max Operating temperature range: -40°C to +115°C Storage temperature range : -40°C to +115°C Direction: CCW B A BODY: STEEL, SILVER PLATED RIGID PINS: COPPER, SILVER PLATED NOTES : 1. LEAD FREE, NO ND MATERIAL, BEO FREE 2. ALL PARAMETERS ARE SPECIFIED IN OPERATING TEMP. RANGE 3.THE DIMENSION OF THE DATA MATRIX IS 7.6MM*7.6MM, INFORMATION INCLUDED WORK ORDER NUMBER-SERIAL NUMBER-MATERIAL NUMBER 4.THIS PART COMPLIES WITH ALL ROHS REQUIREMENTS ENG PART#: 811-092-096-WB040 FUNCTIONAL SYMBOLS =0 =0 =0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM 1:1 mm 9 P1 RELEASE DATE 2022/03/01 8 INCH 4 PLACES ± 0.005 ± ---- 3 PLACES ± 0.025 ± ---- DIVISIONAL SYMBOLS 2 PLACES ± 0.13 1 PLACE ± 0.25 ANGULAR TOL ± DOCUMENT STATUS ± ---± ---± ---1.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 06:07:44 7 6 4 CURRENT REV DESC: RELEASE TO PROD GENERAL TOLERANCES (UNLESS SPECIFIED) 0 PLACES ± 0.4 FORMAT: ACAD-tb-prod-A3 REVISION: B DATE: 2020/01/14 B EC NO: 696580 DRWN: SREN05 CHK'D: JLI252 APPR: HWANG186 INITIAL REVISION: DRWN: SREN05 APPR: HWANG186 THIRD ANGLE PROJECTION 3 2022/02/21 2022/02/23 2022/03/01 RESTRICTED PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2021/12/09 2022/03/01 DRAWING SERIES A3-SIZE 73591 DOC TYPE DOC PART REVISION 735912102 MATERIAL NUMBER 2 A SMSJ ISOLATOR/925~960 MHZ/CCW 0735912102 PSD 000 CUSTOMER A SHEET NUMBER COSTOM PART 1 1 OF 1