0759000421

14 13 12 11 10 9 7 8 'A' 3.60 REF 3.50 REF G G 0.75 ±0.03 ⌖ 0.30Ⓜ A B C 'B' SEE NOTE 5 1.50 REF. G ⌖ 0.30Ⓜ A B C SEE NOTE 5 F 4 3 2 1 NOTES: 1. TERMINAL MAT'L: ALLOY C26000, CARTRIDGE BRASS 2. WAFER MAT'L: 30% GLASS FILLED LCP, 94V-0, COLOR BLACK. 3. TERMINAL PLATING: OPTION 4 - 1.5µm MIN MATTE TIN OVERALL OVER 1.25µm NICKEL OVERALL OPTION 1 - 2.5µm MIN MATTE TIN OVERALL OVER 1.25µm NICKEL OVERALL OPTION 2 - 1.25m NICKEL OVERALL 2.5µm MIN SELECT MATTE TIN PC TAIL AREA 0.05-0.25µm SELECT GOLD CONTACT AREA OPTION 3 - 1.25µm NICKEL OVERALL 2.5µm MIN SELECT MATTE TIN PC TAIL AREA 0.75µm SELECT GOLD CONTACT AREA 4. HEADER ASSEMBLIES ARE TUBE PACKAGED PER PK-36518-352. 5. ALL THE POSITIONAL TOLERANCES SHOULD BE MEASURED AT TIP OF THE TERMINALS. 6. DATUM SHOULD BE CONSIDERED FROM THE EDGES OF THE HOUSING. 7. POSITION TOLERANCES OF THE PIN AT MATING SIDE SHOULD BE MAINTAINED AT 0.3 MM IN THE FINAL MODULE BY CUSTOMER. 8. G DENOTES DIMENSIONS THAT CAN BE QUALIFIED WITH A GAUGE. H C 5 6 15.75 REF H G 9. BLADE GEOMETRY DOES NOT CONFORM TO USCAR SPECIFICATIONS. F 3.00 B 4.50 A 0.50 'C' REF. 12.15 E D 1x2 1x3 C 1x4 1x6 B 1x8 1 x 10 A CKT SIZE 75900-0121 OBSOLETE 2 75900-0221 OBSOLETE 3 75900-0321 OBSOLETE 4 75900-0421 1 75900-0131 OBSOLETE 2 75900-0231 OBSOLETE OBSOLETE 75900-0122 OBSOLETE 3.50 75900-0222 REF 75900-0322 OBSOLETE OBSOLETE 75900-0422 3 75900-0331 4 1 75900-0431 75900-0141 2 75900-0241 3 75900-0341 OBSOLETE 4 75900-0441 OBSOLETE 1 75900-0161 2 75900-0261 OBSOLETE 3 75900-0361 4 75900-0461 1 75900-0181 OBSOLETE OBSOLETE OBSOLETE 2 75900-0281 OBSOLETE 3 75900-0381 OBSOLETE 4 75900-0481 1 OBSOLETE OBSOLETE OBSOLETE 75900-0132 10.5 75900-0232 7.00 75900-0332 14.0 10.50 3.05 21.0 17.50 OBSOLETE OBSOLETE 75900-0242 OBSOLETE OBSOLETE OBSOLETE 75900-0342 OBSOLETE 75900-0442 OBSOLETE 75900-0162 OBSOLETE 75900-0262 OBSOLETE OBSOLETE OBSOLETE OBSOLETE 75900-0432 75900-0142 75900-0362 75900-0462 75900-0182 OBSOLETE 75900-0382 OBSOLETE OBSOLETE 75900-0482 OBSOLETE 75900-0101 OBSOLETE 75900-0102 OBSOLETE 2 75900-0201 OBSOLETE 75900-0202 OBSOLETE 3 75900-0301 OBSOLETE 75900-0302 OBSOLETE 4 75900-0401 OBSOLETE 75900-0402 OBSOLETE MATERIAL NUMBER STATUS PLATING OPTION RELEASE DATE 12 28.0 24.50 35.0 "A" DIM 2020/03/02 31.50 "B" DIM 16:03:07 11 "C" DIM MATERIAL NUMBER 0.75 ±0.03 ⌖ 0.30Ⓜ A B C SEE NOTE 5 X 7.0 D 3.50 3.50 REF STATUS 10.5 7.00 C 2.30 14.0 10.50 Y 4.75 21.0 ⌀ 1.35 ±0.05 ⌖ ⌀0.20 X Y 17.50 B SYMBOLS 28.0 24.50 = 0 = 0 = 0 35.0 "A" DIM 31.50 "B" DIM "C" DIM 9 7 SCALE mm 1:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.25 0 PLACES ± = 0 6 CURRENT REV DESC: TWO PN's 75900-0261 & 75900-0432 ARE OBSOLETE GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 8 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 10 31.50 OBSOLETE OBSOLETE 75900-0282 DOCUMENT STATUS P1 14 13 FORMAT: master-tb-prod-A2 REVISION: H DATE: 2018/01/18 7.0 G 1.00 REF. G ⌖ 0.30Ⓜ A B C SEE NOTE 5 3.50 1 E EC NO: 633184 0.5 ° DRWN: RYELAVATTITH CHK'D: RYELAVATTITH APPR: SNAYAK01 INITIAL REVISION: DRWN: DROSCA APPR: JCOMERCI THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 2020/02/26 2020/03/02 2020/03/02 2010/10/12 2011/06/17 DRAWING SERIES A2-SIZE 75900 4 MX150 RIGHT ANGLE SINGLE ROW UNSHROUDED HEADER ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-75900-002 MATERIAL NUMBER PSD 001 SHEET NUMBER CUSTOMER GENERAL MARKET 3 C5 2 1 OF 1 1 A