0761705016

12 11 10 9 7 8 5 6 4 3 2 1 1.2 (TAIL LENGTH) 13.3 H 3.80 7.60 H 1.00 MIN BOARD THICKNESS SEE NOTE 7 12.7 10.80 SEE NOTE 9 12.75 G G PIN A1 SEE NOTE 12 11.36 F F B A 8.66 0.84 BP ROW A BACKPLANE (REF) E �2.1� SIGNAL HOLES REF DOCUMENT STATUS 12 P1 RELEASE DATE 11 2019/08/08 10 PIN A1 (SEE CHART) (9 HOLES PER COLUMN) SEE NOTE 3. 0.35 OFFSET BETWEEN DC AND BP HOLE COLUMNS 12.75 6.75 D 1.35 8X ⌖ ⌀0.10 14.00 (FULLY MATED) C ⌀2.45 ±0.04 UNPLATED HOLE 2X BP PIN A1 DAUGHTERCARD HOLE PATTERN (CONNECTOR SIDE) B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) 22:00:46 8 10.80 BACKPLANE (REF) ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 9 1.70 MAX ⌀PTH NOTES: 1. MATERIALS: HOUSING - LIQUID CRYSTAL POLYMER (LCP), GLASS-FILLED, UL94V-0 TERMINALS - HIGH PERFORMANCE COPPER ALLOY 2. FINISH: 30µIN MIN SELECTIVE GOLD IN CONTACT AREA, SELECTIVE TIN ON PCB TAILS. NICKEL OVERALL. 3. REFER TO MOLEX PRODUCT SPEC PS-76060-999 FOR PERFORMANCE SPECIFICATIONS AND ADDITIONAL PCB INFORMATION. 4. EACH SIGNAL WAFER CONTAINS 2 COLUMNS OF TERMINALS. 5. PRODUCT IS PACKAGED PER PK-70873-591. 6. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPEC PS-45499-002. 7. REFER TO MOLEX SALES DRAWING SD-76165-003 FOR THE MATING HEADERS AND SD-76410-002 FOR THE MATING RAM CONNECTORS. 8. REFER TO MOLEX PCB ROUTING GUIDE AS-76060-990 FOR THE ANTIPAD AND ROUTING RECOMMENDATIONS. 9. PART NUMBER 76170-5720 SHOWN ON DRAWING. KEYING FEATURES WILL CHANGE WITH COLUMN SIZE. 10.MINIMUM BOARD THICKNESS IS 1.00 mm FOR COMPLIANT PIN FUNCTIONALITY. 11.WHEN USING MOLEX SUPPLIED #2-32 SCREW 73726-0005 (7.62mm +0.38/-0.76 THREADABLE SCREW LENGTH), THE MAXIMUM BOARD THICKNESS RANGE IS 1.9 mm TO 2.5 mm. 12. MARKING: LOCATED APPROXIMATELY AS SHOWN. PART NUMBER AND DATE CODE. FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 4.90 ⌖ ⌀0.10 KEY SHOWN IN POSITION "G" A E ROW J ROW H ROW G ROW F ROW E ROW D ROW C ROW B ROW A D B KEEP-OUT ZONE 1.90 GROUND HOLES REF 15.0 C 5.10 2X 7 6 5 EC NO: 622030 DRWN: SKRISHNAMU01 CHK'D: PRAMASWAMY APPR: SHONG INITIAL REVISION: DRWN: MCARRANZA APPR: JLAURX THIRD ANGLE PROJECTION 4 IMPACT 100 OHM DC 2019/07/30 3 PAIR SIGNAL MODULE GUIDE RIGHT SALES DWG 2019/08/07 2019/08/08 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2007/07/20 2008/02/05 DRAWING SERIES C-SIZE 76170 3 SD-76170-004 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 K1 SHEET NUMBER GENERAL MARKET 1 OF 2 1 A 12 11 10 9 8 7 5 6 4 3 2 1 H H G F MATERIAL NUMBER # OF COLUMNS # OF DIFF PAIR DIM "A" MAX DIM "B" 76170-***6 6 18 19.00 9.50 76170-***8 8 24 22.80 13.30 76170-***0 10 30 26.60 17.10 76170-***4 14 42 34.20 24.70 76170-***6 16 48 38.00 28.50 76170-***6 6 18 19.00 9.50 76170-***8 8 24 22.80 13.30 76170-***0 10 30 26.60 17.10 76170-***4 14 42 34.20 24.70 76170-***6 16 48 38.00 28.50 PTH ⌀ 761700.46 ±0.05 **** MODULE & TAIL PLATING TYPE 5 = RIGHT GUIDED LEAD-FREE # OF COLUMNS 06 = 6 COL 0.46 PTH 08 = 8 COL 0.46 PTH 10 = 10 COL 0.46 PTH 14 = 14 COL 0.46 PTH 16 = 16 COL 0.46 PTH 20 = 10 COL 0.39 PTH 24 = 14 COL 0.39 PTH 26 = 16 COL 0.39 PTH 36 = 6 COL 0.39 PTH 38 = 8 COL 0.39 PTH POLARIZATION KEY ORIENTATION 0 = NO KEY 1=A 5=E 2=B 6=F 3=C 7=G 4=D 8=H 0.39 ±0.05 G F E E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 11 2019/08/08 10 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 22:00:46 9 8 7 6 5 EC NO: 622030 DRWN: SKRISHNAMU01 CHK'D: PRAMASWAMY APPR: SHONG INITIAL REVISION: DRWN: MCARRANZA APPR: JLAURX THIRD ANGLE PROJECTION 4 IMPACT 100 OHM DC 2019/07/30 3 PAIR SIGNAL MODULE GUIDE RIGHT SALES DWG 2019/08/07 2019/08/08 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2007/07/20 2008/02/05 DRAWING SERIES C-SIZE 76170 3 SD-76170-004 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 K1 SHEET NUMBER GENERAL MARKET 2 OF 2 1 A