0764951807

19 L K 18 17 16 MATERIAL DIM "A" # OF # OF DIM "B" NUMBER COLUMNS DIFF PAIR MAX 8 10 16 8 10 16 14 14 12 12 76495-18** 76495-11** 76495-16** 76495-18** 76495-11** 76495-16** 76495-17** 76495-17** 76495-12** 76495-12** 32 40 64 32 40 64 56 56 48 48 15.20 19.00 30.40 15.20 19.00 30.40 26.60 26.60 22.80 22.80 13.30 17.10 28.50 13.30 17.10 28.50 24.70 24.70 20.90 20.90 15 14 13 12 PTH Ø 11 10 76495 - 1 0.46±0.05 0.46±0.05 0.46±0.05 0.39±0.05 0.39±0.05 0.39±0.05 0.46±0.05 0.39±0.05 0.46±0.05 0.39±0.05 9 4 3 2 1 NOTES: 1. MATERIALS: HOUSING - LIQUID CRYSTAL POLYMER (LCP), GLASS-FILLED, UL94V-0 TERMINALS - HIGH PERFORMANCE COPPER ALLOY 2. FINISH: 30µIN SELECTIVE GOLD IN CONTACT AREA, SELECTIVE TIN ON PCB TAILS, NICKEL OVERALL. 3. REFER TO MOLEX PRODUCT SPECIFICATION PS-170540-999 FOR PERFORMANCE SPECIFICATIONS AND ADDITIONAL PCB INFORMATION. 4. EACH SIGNAL WAFER CONTAINS 2 COLUMNS OF TERMINALS. 5. PRODUCT IS PACKAGED PER PK-70873-041. 6. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPEC PS-45499-002. 7. REFER TO MOLEX SALES DRAWING SD-170340-001 FOR THE MATING RECEPTACLES. 8. REFER TO MOLEX PCB ROUTING GUIDE AS-76060-990 FOR ANTIPAD AND ROUTING RECOMMENDATIONS. 9. GROUND PATHS ARE NOT DISCRETE CIRCUITS. 10. MARKING: LOCATED APPROXIMATELY AS SHOWN. PART NUMBER AND DATE CODE. PIN LENGTH (P) 4 = 4.90 (0.46 PTH) 5 = 5.50 (0.46 PTH) 7 = 4.90 (0.39 PTH) 8 = 5.50 (0.39 PTH) # OF COLUMNS 1 = 10 COLUMNS 6 = 16 COLUMNS 8 = 8 COLUMNS 7 = 14 COLUMNS 2 = 12 COLUMNS 5 6 *** MODULE TYPE 1 = UNGUIDED, LEAD-FREE J 7 8 END WALL OPTIONS 0 = OPEN ENDS 1 = LEFT ENDWALL 2 = DUAL ENDWALL 3 = RIGHT ENDWALL L K J 17.8 1.00 MIN BOARD THICKNESS "A" 16.7 H H "B" 1.2 (TAIL LENGTH) 3.80 0.84 GROUND HOLE REF 1.90 1.06 G 14.85 1.50 (ADDED FOR END WALL) SIGNAL HOLES REF 16.80 KEEP OUT ZONE ROW M ROW L ROW K ROW J ROW H ROW G ROW F ROW E ROW D ROW C ROW B ROW A SEE NOTE 10 32.75 REF 16.80 1.35 11X 14.85 6.64 F "P" G F OPEN END OPTION 9.3 PIN A1 1.70 MAX E 1.30 (ADD FOR ENDWALL) 1.50 (ADD FOR ENDWALL) ⌖ ⌀0.10 3.0 E SEE CHART (12 HOLES PER COLUMN) 1.30 (ADDED FOR END WALL) RAM HOLE PATTERN (CONNECTOR SIDE) 20.8 D D C C DUAL WALL OPTION SYMBOLS = 0 = 0 B = 0 FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 P1 18 RELEASE DATE 17 2019/07/31 16 06:22:16 C 15 14 13 12 11 10 9 8 mm NTS = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.25 0 PLACES ± = 0 7 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS SCALE ANGULAR TOL = 0 A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 621143 DRWN: NMUTHARAYAPP CHK'D: BOKOK APPR: SHONG INITIAL REVISION: DRWN: JLAURX APPR: JLAURX THIRD ANGLE PROJECTION 5 IMPACT 4 PAIR PLUS 85OHM 2019/07/19 RAM SIGNAL MODULE UNGUIDED SALES DRAWING 2019/07/23 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2010/11/16 2012/11/19 DRAWING SERIES D-SIZE 76495 4 SD-76495-001 MATERIAL NUMBER SEE CHART 3 PSD 001 A3 SHEET NUMBER CUSTOMER GENERAL MARKET 2 1 OF 2 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 L L ROW A ROW A ROW M K ROW M K PIN A10 PIN A10 J TOP OF BOARD (RAM) 0.35 TOP OF BOARD (DC) J H H PIN A1 PIN A1 COPLANAR MATED SIGNAL PATHS DC PIN A10----------RAM PIN A10 | | | | DC PIN A1----------- RAM PIN A1 G G F F DAUGHTERCARD ASSEMBLY 170340 COPLANAR APPLICATION RAM ASSEMBLY 76495 E E TOP OF BOARD TOP OF BOARD D D 18.00 51.6 C C SYMBOLS = 0 = 0 B = 0 FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 P1 18 RELEASE DATE 17 2019/07/31 16 06:22:16 C 15 14 13 12 11 10 9 8 mm NTS = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.25 0 PLACES ± = 0 7 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS SCALE ANGULAR TOL = 0 A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 621143 DRWN: NMUTHARAYAPP CHK'D: BOKOK APPR: SHONG INITIAL REVISION: DRWN: JLAURX APPR: JLAURX THIRD ANGLE PROJECTION 5 IMPACT 4 PAIR PLUS 85OHM 2019/07/19 RAM SIGNAL MODULE UNGUIDED SALES DRAWING 2019/07/23 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2010/11/16 2012/11/19 DRAWING SERIES D-SIZE 76495 4 SD-76495-001 MATERIAL NUMBER SEE CHART 3 PSD 001 A3 SHEET NUMBER CUSTOMER GENERAL MARKET 2 2 OF 2 1 A