0845250032

9 7 8 6 5 4 3 2 1 STRIP MATERIAL FINISH NUMBER 84525-0009 SELECTIVE TIN 100µ INCH MINIMUM OVER NICKEL 80µ INCH MINIMUM OVERALL SELECTIVE HARD GOLD 30µ INCH MINIMUM WITH SELECTIVE TIN 100µ INCH MINIMUM 84525-0032 OVER NICKEL 50µ INCH MINIMUM OVERALL 0.500 REF TYP 12.70 0.250 REF 6.35 Ø 0.111 REF 2.81 REF SELECTIVE GOLD PLATING (CONTACT BEAM ONLY) B 610 ±12.0 PA B A A SELECTIVE TIN PLATING AREA 0.796 20.22 ⌀ 24.0 ±0.5 D E 0.250 REF 6.35 E D YO FF DI N 0.500 REF 12.70 ⌀ 0.100 C ⌀ 0.750 ±0.2 19.05 ±6.4 B 0.137 REF 3.48 WIRE INSULATION O.D. RANGE 0.055"-0.085" 1.40-2.16 REF 0.111 REF 2.82 2.54 0.112 REF 2.85 IO 0.092 REF 2.35 CT 0.185 REF 4.70 RE 0.143 REF 3.64 SECTION A-A INSULATION CRIMP C B SECTION B-B CONDUCTOR CRIMP NOTES: 1. TERMINAL MATERIAL: COPPER ALLOY, .0118/0.300 THICK. FINISH: SEE CHART. 2. HOOD MATERIAL: STAINLESS STEEL, .006/0.15 THICK. A 3. STRIP PARTS ARE REELED 3000 PARTS PER REEL AS SHOWN ABOVE. 4. TERMINAL FOR USE WITH SERIES XRC & ML-XT CONNECTOR ASSEMBLIES. SYMBOLS = 0 = 0 = 0 DOCUMENT STATUS 9 P1 RELEASE DATE 2018/02/20 8 C ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 7 6 5 4 = 0 CURRENT REV DESC: SEE LONG TEXT GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 14:47:40 SCALE INCH/[mm] 2:1 = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 2.0 ° 0.13 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS EC NO: 168799 DRWN: JFLETCHER CHK'D: JDWALLACE APPR: JDWALLACE INITIAL REVISION: DRWN: JFLETCHER APPR: JALEXANDER THIRD ANGLE PROJECTION 3 2017/11/21 2018/02/12 2018/02/20 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/01/25 2016/02/23 845250010 MATERIAL NUMBER DRAWING SERIES A3-SIZE 84525 2 A XRC SOCKET W/SNAP WINDOW 16-18 AWG 0.055"-0.085" WIRE Ø SEE CHART PSD 000 B SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 1