0845250057

9 7 8 6 5 4 3 2 1 STRIP MATERIAL FINISH NUMBER 84525-0053 SELECTIVE TIN 100µ INCH MINIMUM OVER NICKEL 80µ INCH MINIMUM OVERALL SELECTIVE HARD GOLD 30µ INCH MINIMUM WITH SELECTIVE TIN 100µ INCH MINIMUM 84525-0057 OVER NICKEL 50µ INCH MINIMUM OVERALL 0.500 REF TYP 12.70 0.250 REF 6.35 Ø 0.111 REF 2.81 REF SELECTIVE GOLD PLATING (CONTACT BEAM ONLY) B 610 ±12.0 B A PA 0.797 20.25 ⌀ 24.0 ±0.5 D E A SELECTIVE TIN PLATING AREA 0.250 REF 6.35 E D YO FF DI IO 0.093 REF 2.35 CT N 0.185 REF 4.70 RE 0.500 REF 12.70 ⌀ 0.100 ⌀ 0.750 ±0.2 19.05 ±6.4 B 0.134 REF 3.40 WIRE INSULATION O.D. RANGE 0.055"-0.100" 1.40-2.54 C 0.114 2.90 C 0.115 REF 2.92 2.54 0.146 3.71 SECTION A-A INSULATION CRIMP B SECTION B-B CONDUCTOR CRIMP NOTES: 1. TERMINAL MATERIAL: COPPER ALLOY, .0118/0.300 THICK. FINISH: SEE CHART. 2. HOOD MATERIAL: STAINLESS STEEL, .006/0.15 THICK. A 3. STRIP PARTS ARE REELED 3000 PARTS PER REEL AS SHOWN ABOVE. 4. TERMINAL FOR USE WITH SERIES XRC & ML-XT CONNECTOR ASSEMBLIES. SYMBOLS = 0 = 0 = 0 DOCUMENT STATUS 9 P1 RELEASE DATE 2018/02/20 8 C ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 7 6 5 4 = 0 CURRENT REV DESC: SEE LONG TEXT GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 14:47:40 SCALE INCH/[mm] 2:1 = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 2.0 ° 0.13 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS EC NO: 168799 DRWN: JFLETCHER CHK'D: JDWALLACE APPR: JDWALLACE INITIAL REVISION: DRWN: JFLETCHER APPR: JALEXANDER THIRD ANGLE PROJECTION 3 2017/11/21 2018/02/12 2018/02/20 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/01/20 2016/01/29 845250050 MATERIAL NUMBER DRAWING SERIES A3-SIZE 84525 2 A XRC SOCKET TERMINAL W/SNAP WINDOW 16-20AWG (0.5-1.0MM²) 0.055"-0.100" WIRE Ø SEE CHART PSD 000 B SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 1