0877620006

9 7 8 5 6 A ±0.38 4 1 CKT 1 NOTES 1. MATERIAL: HSG: NYLON, GLASS-FILLED, UL94V-0 COLOR: BLACK CAP: NYLON, GLASS-FILLED, UL94V-0, COLOR: BLACK PIN: 0.50MM SQ, COPPER ALLOY 2. PLATING TYPE: (1) 0.025µm GOLD OVERALL 1.25µm MIN. NICKEL OVERALL. (2) 0.05 - 0.25µm. GOLD ON CONTACT AND 2.50µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. (3) 0.38µm MIN. GOLD PLATE ON CONTACT AND 2.00µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. (4) 0.75µm MIN. GOLD PLATE ON CONTACT AND 2.00µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. (5) 2.50µm MIN. TIN OVERALL 1.25µm MIN. NICKEL OVERALL (6) 0.05 - 0.25µm. GOLD OVERALL 1.25µm MIN. NICKEL OVERALL. 3. PRODUCT SPECIFICATION: PS-87761-100 4. PACKAGING TYPE: PLS SEE TABLE 5. PACKAGING SPEC: PLS SEE SHEET 2 AND SHEET 3 6. WAFER TO BE FLAT WITHIN 0.003 mm/mm 7 BEND DEPRESSION IS ACCEPTED SO LONG AS IT DOES NOT AFFECT THE OVERALL COPLANARITY OF TAIL 8 COPLANARITY IS TO BE MEASURED BY RESTING THE SOLDER TAIL ON A FLAT SURFACE 9 CAP LOCATION IS CENTERED ALONG THE MATING ENDS AS SHOWN. TOP SURFACE OF CAP TO BE FLAT FOR THE PURPOSE OF PICK & PLACE BY VACUUM SUCTION NOZZLE 10 IRREGULAR CIRCUIT CUTOFF WITHIN BREAKAWAY SECTION IS PERMISSIBLE.CUTTING OR CHIPPING OF THE MAIN BODY IS NOT ACCEPTABLE 11.RECOMMENDED PCB THICKNESS IS 1.60±0.10mm 12.THE ABOVE CKT 14 IS FOR ILLUSTRATION PURPOSE ONLY 13.TUBE LENGTH AS PER STANDARD 560mm 2.00 ±0.05 TYP NON-ACCUM 1.00 TYP 2.00 TYP E �4.00� 2.00 TYP 1.50 �4.50� 2.50 TYP CKT 2 2 B B 1.75 TYP 3 0.50 ±0.05 SQ.TYP ⌀1.00 +0.08 TYP 0 C RECOMMENDED PCB LAYOUT 9 �6.35� �5.20� D M �F� �1.50� TYP �G� H C ⌓ 0.15 �2.70� �1.15� C 7 �E� E D C PART WITHOUT PEGS & CAP VERSION PART WITH PEGS & CAP VERSION B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: P/N 87762-5035 ADD GENERAL TOLERANCES (UNLESS SPECIFIED) A MM 4 PLACES ± 3 PLACES ± 2 PLACES ± ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS 9 P1 RELEASE DATE 2019/09/06 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 INCH ± ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:29:25 7 6 5 4 EC NO: 623663 DRWN: ABABUPS CHK'D: MRAMAKRISHNA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: SKLIM01 APPR: MLONG THIRD ANGLE PROJECTION 3 2019/08/27 2019/09/06 2019/09/06 CUSTOM HEADER 2.00MM PITCH DUAL ROW HEADER, DUAL WAFER, SMT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2006/07/21 2010/03/08 SD-87762-175 MATERIAL NUMBER DRAWING SERIES A3-SIZE 87762 2 SEE TABLE PSD 001 D2 SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 4 A 9 ITEM 7 8 6 PART PACKED IN PACKAGING ORIENTATION (FOR REF. USE ONLY) PACKAGING PACKAGING PART OVERALL TYPE SPECIFICATION HEIGHT 5 4 ITEM 3 PACKAGING PACKAGING PART OVERALL TYPE SPECIFICATION HEIGHT 2 1 PART PACKED IN PACKAGING ORIENTATION (FOR REF. USE ONLY) E E TUBE 1 PK-89990-475 DIMENSION F/G= ≤13.3MM 3 HEADER WITH CAP IN TUBE D TRAY PK-89990-487 DIMENSION F/G= MAX. 40.0MM HEADER WITHOUT CAP IN TUBE D PART NO. QTY. DATE CODE C TUBE 2 PK-89990-474 DIMENSION F/G= 13.4MM ~ 23.4MM 4 HEADER WITH CAP IN TUBE B TAPE & REEL PK-89990-484 (REEL ⌀: 330.0 MAX.) C DIMENSION F/G= MAX. 26.0MM HEADER WITHOUT CAP IN TUBE B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: P/N 87762-5035 ADD GENERAL TOLERANCES (UNLESS SPECIFIED) A MM 4 PLACES ± 3 PLACES ± 2 PLACES ± ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS 9 P1 RELEASE DATE 2019/09/06 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 INCH ± ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:29:25 7 6 5 4 EC NO: 623663 DRWN: ABABUPS CHK'D: MRAMAKRISHNA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: SKLIM01 APPR: MLONG THIRD ANGLE PROJECTION 3 2019/08/27 2019/09/06 2019/09/06 CUSTOM HEADER 2.00MM PITCH DUAL ROW HEADER, DUAL WAFER, SMT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2006/07/21 2010/03/08 SD-87762-175 MATERIAL NUMBER DRAWING SERIES A3-SIZE 87762 2 SEE TABLE PSD 001 D2 SHEET NUMBER CUSTOMER GENERAL MARKET 1 2 OF 4 A E D 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 5 6 4 3 TUBE TUBE TAPE & REEL WITH CAP WITHOUT CAP WITH CAP W/O CAP IN TRAY PEG PLATE OPT. CKT SIZE 7 8 CKT SIZE 9 ------------------87762-1800 ----------------------------87762-0014 --87762-0025 --87762-0014 --87762-3232 87762-5032 87762-1633 87762-5033 87762-5034 ------------------87762-0872 ----------------------------------87762-0003 87762-0006 87762-0010 87762-0005 87762-0011 87762-0012 87762-0013 ------87762-0600 --87762-0015 ----------------87762-0033 ----87762-0035 -------- 04 08 06 10 14 14 16 16 16 18 20 20 30 30 30 30 40 24 24 26 40 12 14 16 14 12 12 06 14 14 32 50 16 50 50 50 20 20 20 10 10 10 20 20 08 N N N N N Y Y N Y Y Y Y N N Y N Y N N N Y N N N Y Y Y Y Y Y Y Y Y Y Y Y N Y N N Y N Y Y Y PART NO. IN PACKAGING OPTION DIMENSION A B C 4.00 2.00 6.00 4.00 8.00 6.00 4.00 10.00 8.00 6.00 12.00 10.00 8.00 14.00 12.00 10.00 16.00 14.00 12.00 18.00 16.00 14.00 20.00 18.00 16.00 22.00 20.00 18.00 24.00 22.00 20.00 26.00 24.00 22.00 28.00 26.00 24.00 30.00 28.00 26.00 32.00 30.00 28.00 34.00 32.00 30.00 36.00 34.00 32.00 38.00 36.00 34.00 40.00 38.00 36.00 42.00 40.00 38.00 44.00 42.00 40.00 46.00 44.00 42.00 48.00 46.00 44.00 50.00 48.00 46.00 D2 C B 87762-0400 87762-0800 87762-0601 --87762-1401 87762-1402 --87762-1654 87762-1655 --87762-0040 87762-2000 --87762-3007 87762-3008 87762-3009 87762-4007 ------------------------------------87762-5035 ------------------- ------87762-1007 ----87762-1652 ----------87762-3080 ------------------------87762-0024 --------------------87762-0036 87762-0032 --87762-0037 87762-0034 --87762-0038 87762-0039 ---- 3 3 4 3 5 3 3 4 2 3 4 3 1 1 6 2 3 3 3 3 3 2 2 2 4 3 3 3 4 4 4 4 4 4 4 4 3 3 3 3 3 3 4 4 3 2 1 DIMENSION MATING STACKER SMT END HEIGHT HEIGHT G (F) M H E 11.47 11.47 13.48 11.05 13.27 11.27 25.65 18.87 9.71 23.85 15.45 19.27 16.55 17.65 17.91 18.66 20.66 20.66 18.66 18.66 18.51 18.51 23.31 23.31 14.61 14.61 ----------------18.58 10.20 10.20 11.86 15.45 8.70 12.00 12.90 10.00 24.30 17.60 8.44 22.30 13.45 13.45 18.00 14.20 16.30 15.45 20.60 20.60 16.60 13.90 9.30 15.37 17.35 19.35 19.35 19.35 17.35 17.35 17.20 17.20 22.00 22.00 13.30 13.30 7.29 7.29 7.29 7.29 7.29 7.29 7.29 8.44 17.27 4.40 4.40 3.73 7.32 3.00 4.50 6.90 4.90 4.00 4.52 4.24 3.80 3.35 3.35 5.00 3.00 3.50 7.32 7.90 7.90 6.00 4.50 4.80 5.97 4.65 6.65 6.65 6.65 4.65 4.65 4.00 4.00 4.00 4.00 4.00 4.00 1.50 1.50 1.50 1.50 1.50 1.50 3.09 4.24 7.62 4.60 4.60 6.93 6.93 4.50 6.30 4.80 3.90 19.10 11.88 3.00 17.30 8.90 8.90 11.80 10.00 11.60 6.93 11.50 11.50 9.40 7.90 3.00 8.2 11.50 11.50 11.50 11.50 11.50 11.50 12.00 12.00 16.80 16.80 8.10 8.10 4.59 4.59 4.59 4.59 4.59 4.59 3.00 3.00 8.45 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.50 1.50 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 1.20 PACKAGING SPECIFICATION (PLS REFER TO SHEET 2) 4 4 4 2 4 4 1 4 4 2 4 4 2 4 4 4 4 3 3 3 3 3 3 3 2 REFER PK-151033-0001 REFER PK-151033-0001 3 2 3 2 2 2 2 2 4 2 2 3 2 2 3 2 2 2 E D C B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: P/N 87762-5035 ADD GENERAL TOLERANCES (UNLESS SPECIFIED) A MM 4 PLACES ± 3 PLACES ± 2 PLACES ± ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS 9 P1 RELEASE DATE 2019/09/06 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 INCH ± ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:29:25 7 6 5 4 EC NO: 623663 DRWN: ABABUPS CHK'D: MRAMAKRISHNA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: SKLIM01 APPR: MLONG THIRD ANGLE PROJECTION 3 2019/08/27 2019/09/06 2019/09/06 CUSTOM HEADER 2.00MM PITCH DUAL ROW HEADER, DUAL WAFER, SMT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2006/07/21 2010/03/08 SD-87762-175 MATERIAL NUMBER DRAWING SERIES A3-SIZE 87762 2 SEE TABLE PSD 001 D2 SHEET NUMBER CUSTOMER GENERAL MARKET 1 3 OF 4 A 7 PART NO. IN PACKAGING OPTION TUBE TUBE TAPE & REEL W/O CAP WITH CAP WITHOUT CAP IN TRAY WITH CAP E ------------------- ---87762-0874 ----87762-1000 ----87762-2601 ------------------- 87762-0873 ---87762-0029 ---87762-2600 ---- PEG PLATE OPT. 8 CKT SIZE 9 08 08 10 10 26 26 Y Y Y Y Y Y 2 2 6 6 1 1 5 6 4 3 2 1 DIMENSION MATING STACKER SMT END HEIGHT HEIGHT G (F) -17.27 17.27 18.58 -23.50 23.50 24.81 -20.60 20.60 21.91 M H E 7.62 7.62 4.50 4.50 7.90 7.90 8.45 8.45 17.80 17.80 11.50 11.50 1.20 1.20 1.20 1.20 1.20 1.20 PACKAGING SPECIFICATION (PLS REFER TO SHEET 2) 2 2 2 2 2 2 E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: P/N 87762-5035 ADD GENERAL TOLERANCES (UNLESS SPECIFIED) A ANGULAR TOL DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2019/09/06 8 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 3.0 ° 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:29:25 7 6 5 4 EC NO: 623663 DRWN: ABABUPS CHK'D: MRAMAKRISHNA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: SKLIM01 APPR: KWLEE THIRD ANGLE PROJECTION 3 2019/08/27 2019/09/06 2019/09/06 CUSTOM HEADER 2.00MM PITCH DUAL ROW HEADER, DUAL WAFER, SMT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2006/12/21 2006/12/26 SD-87762-175 MATERIAL NUMBER DRAWING SERIES A3-SIZE 87762 2 PSD 001 D2 SHEET NUMBER CUSTOMER GENERAL MARKET 1 4 OF 4 A