0877622601

10 9 7 8 5 6 4 PART NUMBERS B A F CKT VOID SIZE POSITION 2 DIMENSION A B M H F -- 5.50 87762-0873 8 ---- 7.90 6.00 7.62 8.45 87762-0874 8 ---- 7.90 6.00 7.62 8.45 18.58 87762-0029 10 ---- 9.90 8.00 4.50 17.80 -- (5.50) 2 87762-0030 10 ---- 9.90 8.00 4.50 17.80 -- (5.50) 2 87762-1000 10 ---- 9.90 8.00 4.50 17.80 24.81 (5.50) 2 87762-1001 10 ---- 9.90 8.00 4.50 17.80 24.81 (5.50) 2 87762-2600 26 ---- 25.90 24.00 7.90 11.50 (5.50) 1 87762-2601 26 ---- 25.90 24.00 7.90 11.50 21.91 (5.50) 1 ⌀1.00 ±0.05 (2X) 0.75 ±0.05 TYP B2 4.00 1 PLATING OPTION K ±0.15 1.00 TYP B CKT#1 5.50 ±0.15 3 3 2.00 TYP 2.75 TYP E 3 B2 CKT#2 �0.75� TYP 5.20 2.00 ±0.05 TYP NON-ACCUM. C -- PACKAGING TYPE WITHOUT CAP F IN TUBE WITH CAP IN TUBE WITHOUT CAP IN TUBE WITHOUT CAP IN TUBE WITH CAP IN TUBE WITH CAP IN TUBE E WITHOUT CAP IN TUBE WITH CAP IN TUBE RECOMMENDED P.C.B LAYOUT 4 6.35 D D M NOTES: 1. MATERIAL: HOUSING: NYLON (4/6), UL94V-0, COLOR: BLACK PIN: COPPER ALLOY, SQ, 0.50mm 2. PLATING FINISH: 1: 15-25µ inches MIN GOLD PLATE IN SELECTED AREA AND 120-200µ inches MIN TIN ON SOLDER TAIL OVER 50-70µ inches MIN NICKEL UNDERPLATE OVERALL. 2: 120µ inches MIN TIN OVERALL 50µ inches MIN NICKEL UNDERPLATE OVERALL. 3: 15µ inches MIN GOLD PLATE IN SELECTED AREA AND 75µ inches MIN TIN ON SOLDER TAIL OVER 50µ inches MIN NICKEL UNDERPLATE OVERALL. 3. PIN PUSHOUT FORCE: 1kg MIN IN EITHER DIRECTION. 4. CAP TO BE LOCATED AS CENTRAL OF PART AS POSSIBLE 5. THE ABOVE 8CKTS SHOWN IS FOR ILLUSTRATION ONLY. 6. FOR PACKING OPTION PLEASE REFER TO THE TABLE. 7. HEADER MAY BE BROKEN TO DESIRE CKT SIZE, SLIGHTLY FLASHES SHOULD BE ACCEPTED. 8. PACKAGING SPECIFICATION: PK-89990-474 �F � �1.50� TYP H C 2.70 MAX 1.20 ⌀0.80 TYP �1.15� 2.00 TYP K B C B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM NTS CURRENT REV DESC: BRIGHT TIN PHASE OUT GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2021/10/11 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 11:53:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 679909 DRWN: AKUMAR19 CHK'D: MRAMAKRISHNA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION CUSTOM HEADER 2.00MM PITCH, WITH PEG DUAL ROW DUAL WAFER, SMT 2021/07/27 2021/10/11 PRODUCT CUSTOMER DRAWING 2021/10/11 2004/12/10 2004/12/28 DRAWING SERIES A3-SIZE 87762 3 DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87762-135 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 B2 SHEET NUMBER 1 OF 1 1 A