0878335220

9 7 8 5 6 D CIRCUIT # 2 RIBS LOCATION VARIES DEPENDING ON CKT. SIZES. B E ℄ F 3 2 ASSEMBLY P/N ASSEMBLY P/N ASSEMBLY P/N CKT VOID PIN PACKED IN TUBE PACKED IN TUBE PACKED IN T&R SIZE LOCATION (W/O KAPTON) (WITH KAPTON) (WITH KAPTON) A Y 4 2.00 4.50 87833-5230 --- --- 87833-5220 --- --- 87833-7620 --- --- --- 87833-0871 87833-0881 12 1 10 10 3 7 8 1 DIMENSION A B PLATING OPTION D E F 14.65 10.00 13.00 12.85 5.00 2.16 1 12.65 8.00 11.00 10.85 4.00 2.16 1 10.65 6.00 9.00 3.00 2.16 1 C 8.85 E 5.00 6.30 CIRCUIT # 1 E Z SQ. 0.50±0.05 �TYP.� 2.00 ⌖ ⌀0.30Ⓜ X YⓂ ZⓂ �TYP.� G 4 D ℄ X 3.60 4.70 D �2.50� GOLD MEAS. PT. 6.40 1.70 2.00 PIN PLATING: SEE LEGEND G T C NOTES: 1. FOR ILLUSTRATION PURPOSES, 8 CIRCUIT SIZE WAFER IS SHOWN. 2. MATERIAL : HOUSING : NYLON 46, GLASS FILLED, UL94V-0, COLOR BLACK. PIN : 0.50mm SQ.PHOSPHOR BRONZE. KAPTON TAPE : POLYMIDE 4mm X 30m X 0.055mm COLOR: AMBER 3. PRODUCT SPECIFICATION PS-87831-027 APPLIES. 4. CKT 4 & 6 HAS NO IDENTIFICATION TAG. 5. THIS HEADER MATES WITH MOLEX: a) CRIMP RECEPTACLE HOUSING, 51110 SERIES WITH CRIMP TERMINAL, 50394 SERIES. b) 2mm MILLIGRID DUAL ROW IDT, 87568 SERIES. 6. PARTS TO BE PACKED WITH MOISTURE BARRIER BAG. 7. NO CENTRE POLARIZATION SLOT FOR CKT SIZE 4 AND 6 SECTION G-G RIBS LOCATION VARIES DEPENDING ON CKT. SIZES & FEATURES C PLATING OPTIONS: 1 - 0.38µm/15µin GOLD IN CONTACT AREA AND 1.88µm/75µin MIN. TIN IN SOLDER TAIL AREA OVER 1.27µm/50µin MIN. NICKEL OVERALL. 2 - 0.76µm/30µin GOLD IN CONTACT AREA AND 1.88µm/75µin MIN. TIN IN SOLDER TAIL AREA OVER 1.27µm/50µin MIN. NICKEL OVERALL. 3 - 0.05-0.13µm/2-5µin GOLD IN CONTACT AREA AND SQ. 0.50 ±0.05 �TYP.� 1.88µm/75µin MIN. TIN IN SOLDER TAIL AREA OVER ⌖ ⌀0.30Ⓜ T �TYP.� ⌀ 0.90 ±0.05 �TYP.� THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION MIGRATED TO ECTR 2017/11/15 2018/04/24 2018/04/24 ⌖ ⌀0.20 2.00 2.00 �TYP.� B EC NO: DRWN: CHK'D: APPR: A RECOMMENDED PCB PATTERN RELEASE STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: C DATE: 2017/02/06 9 P1 RELEASE DATE 2018/04/24 8 B 1.27µm/50µin MIN. NICKEL OVERALL. A18 12:56:32 7 6 5 REV 2.00 170067 MUM CD GGA B C SCALE DIMENSION UNITS GENERAL TOLERANCES (UNLESS SPECIFIED) INCH MM MM DRWN BY 4 PLACES ± ± ATSEE 3 PLACES ± ± CHK'D BY 2 PLACES ± 0.2 ± KCLING 1 PLACES ± ± APPR BY 0 PLACES ± ± ANGULAR TOL ± 3.0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 NTS DATE 2003/10/23 A 2003/11/07 DATE PRODUCT CUSTOMER DRAWING 2003/11/07 SKTOH DRAWING SIZE MGRID, SHROUDED HEADER W/LOCKING FEATURE, R/A DATE THIRD ANGLE PROJECTION A3 MATERIAL NUMBER SERIES 87833 SEE TABLE DOCUMENT NUMBER SD-87833-011 3 CUSTOMER 2 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 1 OF 2 001 1 9 7 8 RED ARROW INDICATION 5 6 4 3 2 MOLEX LOGO & TUBE PART NO. 89990-0007. (ON THE LEFT HAND SIDE OF TUBE). E 1 ASSEMBLY P/N PACKED IN T&R (WITH KAPTON) CKT SIZE (F) (Bo) (B1) (W) 87833-0881 08 11.50 11.00 10.00 24.00 E WINDOW FACING OUTWARDS 4 KAPTON TAPE ⌀ 1.50 +0.10 0.00 4.00 2.00 (PILOT HOLE) �1.75� REF: ORIENTATION OF PART IN TUBE. �0.50� (FOR THE REFERENCE OF PART/TUBE ASSEMBLY.) Y D D �F� CUSTOMER PULL OUT DIRECTION �B1� �W� �Bo� Z Z Y C C �16.00� �4.0� SECTION Y-Y �9.20� NOTES: 1. LEADER AND TRAILER TAPE �2.70� 390 MIN. TOP TAPE NON BONDED TAPE 160 MIN. TOP TAPE TRAILER �8.90� B PULL OUT DIRECTION 3° 3° �6.50� B COMPONENT 230 MIN. LEADER PART (EMPTY) SECTION Z-Z 2. PEELING OFF FORCE OF THE TOP TAPE: 20-80gf. (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) 2017/11/15 2018/04/24 2018/04/24 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION PEEL OFF DIRECTION MIGRATED TO ECTR 15° MAX. PULL OUT DIRECTION 3. PACKAGING STANDARD IS AS PER EIA-481. 4. KAPTON TAPE SHOULD BE LOCATED AS CENTRAL OF PART AS POSSIBLE AND MUST COVER THE WINDOWS. 5. TAPE & REEL QUANTITY : 500 PCS/REEL FORMAT: Met-lega-master-tb-prod-A3 REVISION: C DATE: 2017/02/06 9 P1 RELEASE DATE 2018/04/24 8 A18 12:56:32 7 6 5 REV RELEASE STATUS EC NO: DRWN: CHK'D: APPR: A 170067 MUM CD GGA 160 MIN. TAIL PART �EMPTY� SCALE DIMENSION UNITS GENERAL TOLERANCES (UNLESS SPECIFIED) INCH MM MM DRWN BY 4 PLACES ± ± ATSEE 3 PLACES ± ± CHK'D BY 2 PLACES ± 0.2 ± KCLING 1 PLACES ± ± APPR BY 0 PLACES ± ± ANGULAR TOL ± 3.0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 NTS DATE 2003/10/23 A 2003/11/07 DATE PRODUCT CUSTOMER DRAWING 2003/11/07 SKTOH DRAWING SIZE MGRID, SHROUDED HEADER W/LOCKING FEATURE, R/A DATE THIRD ANGLE PROJECTION A3 MATERIAL NUMBER SERIES 87833 SEE TABLE DOCUMENT NUMBER SD-87833-011 3 CUSTOMER 2 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 OF 2 001 1