0878910601

10 9 8 7 5 6 3 A+0.50 MIN (KEEP OUT ZONE) ASSEMBLY WITHOUT CAP F 4 1 F NOTES 1. MATERIAL: B CONNECTOR KEEP OUT ZONE 2 HSG: NYLON, GLASS-FILLED, UL94V-0 COLOR: BLACK 2.54±0.05 TYP NON-ACCUM. PIN: 0.64MM SQ, COPPER ALLOY 2. PLATING TYPE: A ±0.38 7 (1) GOLD FLASH OVER B 1.25µm MIN. NICKEL OVERALL. CKT 1 (2) GOLD FLASH ON CONTACT AND 2.54TYP 2.50µm MIN. TIN ON SOLDERTAIL OVER E �2.51� E 1.25µm MIN. NICKEL OVERALL. 3.00MIN (KEEP OUT ZONE) (3) 0.38µm MIN. GOLD PLATE ON CONTACT AND 2.00µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. (4) 0.75µm MIN. GOLD PLATE ON CONTACT AND CKT 1 2.00µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. ⌀ 1.14±0.05 TYP RECOMMENDED P.C.B. HOLE LAYOUT 0.64±0.05SQ TYP (5) 2.50µm MIN TIN OVERALL 1.25µm MIN NICKEL OVERALL 3. PRODUCT SPECIFICATION: PS-87920-019 D D 4. PACKAGING TYPE: SEE TABLE 5. WAFER TO BE FLAT WITHIN 0.003 mm/mm 6. RECOMMENDED PCB THICKNESS IS 1.60mm±0.10 7. IRREGULAR CIRCUIT CUTOFF WITHIN BREAKAWAY SECTION IS PERMISSIBLE.CUTTING OR CHIPPING OF THE MAIN BODY IS M NOT ACCEPTABLE 8. THE ABOVE CKT 6 IS FOR ILLUSTRATION PURPOSE ONLY 9. PACKAGING SPECIFICATION: (F) TRAY: PK-89990-489 C C BULK: PK-89990-491 �2.49� T&R : PK-87898-400 TUBE: PK-89990-934 10. REFER SHEET 2 FOR CAP LOCATION. P 2.54 TYP B B FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: P/N ADDED IN TABLE = 0 = 0 = 0 mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± DIVISIONAL SYMBOLS 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2021/07/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:39:19 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 670360 DRWN: VIJAYS4 CHK'D: ABABUPS APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: KCHO APPR: SCLOW THIRD ANGLE PROJECTION 2021/07/07 2021/07/15 2021/07/15 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/24 2004/04/08 DRAWING SERIES A3-SIZE 87891 3 CUSTOM HEADER 2.54MM PITCH, SINGLE ROW SINGLE WAFER, T/H HEADER SD-87891-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D17 SHEET NUMBER 1 OF 4 1 A 10 9 �7.50� 7 8 5 6 4 3 2 1 CAP INFORMATION- CAP OPTION A �4.50� FOR ILLUSTRATION OF EVEN CKT (4CKT AS SHOWN) FOR ILLUSTRATION OF ODD CKT (5CKT AS SHOWN) F F B B �1.27� �G� E E C/L OF CAP C/L OF DIM B C/L OF CAP C/L OF DIM B = C/L OF CAP FOR ODD CKT �5.00� C/L OF DIM B C/L OF DIM B IS OFFSET BY 1.27MM WITH C/L OF CAP FOR EVEN CKT (4.50) CAP INFORMATION- CAP OPTION B D D FOR ILLUSTRATION OF ODD CKT (5CKT AS SHOWN) FOR ILLUSTRATION OF EVEN CKT (4CKT AS SHOWN) B B �1.27� (G) C C C/L OF DIM B C/L OF CAP C/L OF CAP C/L OF DIM B IS OFFSET BY 1.27MM WITH C/L OF CAP FOR ODD CKT C/L OF DIM B C/L OF DIM B = C/L OF CAP FOR EVEN CKT B B FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: P/N ADDED IN TABLE = 0 = 0 = 0 mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± DIVISIONAL SYMBOLS 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2021/07/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:39:19 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 670360 DRWN: VIJAYS4 CHK'D: ABABUPS APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: KCHO APPR: SCLOW THIRD ANGLE PROJECTION 2021/07/07 2021/07/15 2021/07/15 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/24 2004/04/08 DRAWING SERIES A3-SIZE 87891 3 CUSTOM HEADER 2.54MM PITCH, SINGLE ROW SINGLE WAFER, T/H HEADER SD-87891-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D17 SHEET NUMBER 2 OF 4 1 A 10 01 02 03 04 05 DIMENSION A B --2.54 5.08 2.54 7.62 5.08 10.16 7.62 12.70 10.16 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 15.24 17.78 20.32 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 50.80 53.34 55.88 58.42 60.96 63.50 66.04 68.58 71.12 73.66 76.20 78.74 81.28 83.82 86.36 88.90 91.44 93.98 96.52 99.06 40 101.60 99.06 CKT SIZE F E D C 9 7 8 ASSY W/CAP ASSY W/O CAP ASSY W/O CAP ASSY W/CAP IN T&R IN T&R IN TUBE IN TUBE 12.70 15.24 17.78 20.32 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 50.80 53.34 55.88 58.42 60.96 63.50 66.04 68.58 71.12 73.66 76.20 78.74 81.28 83.82 86.36 88.90 91.44 93.98 96.52 4 PART NO. PART NO. CKT VOID KINK W/O CAP IN TRAY IN BULK PIN SIZE PIN PACKAGING PACKAGING 3 (G) MATING SOLDIER OAL END TAIL M P (F) 10.80 5.08 3.23 12.29 6.80 3.00 11.76 6.09 3.18 11.30 5.84 2.97 11.30 5.84 2.97 11.30 5.84 2.97 9.80 4.00 3.31 7.49 4.00 1.00 10.80 5.08 3.23 31.00 25.54 2.97 7.29 2.40 2.40 18.37 12.68 3.20 26.49 20.80 3.20 19.49 13.00 4.00 14.98 13.98 7.49 4.00 12.14 5.84 3.81 11.30 5.84 2.97 11.30 5.84 2.97 22.73 18.74 1.50 - - - 87891-0108 87891-1017 87891-0200 87891-0205 87891-0206 87891-0211 87891-0207 87891-0208 87891-0209 87891-0210 87891-0216 87891-0212 87891-0211 87891-0214 87891-0213 87891-0306 87891-0308 87891-0307 - 01 01 02 02 02 02 02 02 02 02 02 02 02 02 02 02 03 03 03 - - - - - - 87891-0003 - 03 2 - - 13.72 9.65 - 87891-0312 - - - - 03 - - - 11.30 87891-0311 - - - - - 03 - - 87891-0313 - - - - - 03 - - - - - - - 87891-0310 03 - - - - - - 87891-0402 87891-0004 87891-0411 87891-0407 87891-0408 - 04 04 04 04 04 2 - - 87891-0418 - - 87891-0409 - 04 87891-0417 - - - 87891-0430 87891-0432 - - D17 - - - - 87891-0500 D17 - - - - 87891-0505 D17 D17 D17 D17 D17 2 1 DIMENSION 87891-0215 - D17 B 5 6 PLATING CAP TYPE OPTION REMARKS F 5 3 5 4 5 5 5 2 5 5 5 5 5 5 5 4 5 5 5 A - - 1.78 6 - - 5.84 2.97 4 - - 12.34 11.30 5.84 2.97 5 B REFER RPK-87891-0311 (FOR 87891-0311) 12.34 11.30 5.84 2.97 5 B - - 6.49 2.00 2.00 5 - - - - 10.80 35.10 10.09 9.80 31.00 5.89 29.71 4.00 4.00 25.54 2.41 3.10 3.60 3.31 2.97 5 6 5 5 5 - - - - - 12.14 6.75 2.90 5 - REFER 878910418-RPK (FOR 87891-0418) 04 04 04 - - 16.31 15.11 18.03 13.09 9.01 13.54 8.00 3.61 2.00 2.80 5 5 5 A A - - 05 - - - 11.94 6.10 3.30 5 - - - 05 - - - 11.94 6.10 3.30 5 - - E - D - C B FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: P/N ADDED IN TABLE = 0 = 0 = 0 mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± DIVISIONAL SYMBOLS 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2021/07/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:39:19 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 670360 DRWN: VIJAYS4 CHK'D: ABABUPS APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: KCHO APPR: SCLOW THIRD ANGLE PROJECTION 2021/07/07 2021/07/15 2021/07/15 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/24 2004/04/08 DRAWING SERIES A3-SIZE 87891 3 CUSTOM HEADER 2.54MM PITCH, SINGLE ROW SINGLE WAFER, T/H HEADER SD-87891-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D17 SHEET NUMBER 3 OF 4 1 A 10 9 7 8 5 6 4 3 2 1 (G) F E D C B ASSY W/CAP ASSY W/O CAP ASSY W/O CAP IN TUBE ASSY W/CAP IN TUBE IN T&R IN T&R 87891-0613 87891-0007 87891-0807 87891-1817 87891-1819 87891-1818 87891-2817 87891-2819 87891-2818 - 87891-0521 - 87891-4007 - PART NO. W/O CAP IN TRAY PACKAGING PART NO. IN BULK PACKAGING 87891-0501 87891-0502 87891-0503 87891-0504 87891-0507 87891-0522 87891-0516 87891-0517 87891-0523 87891-0601 87891-0602 87891-0606 87891-0610 87891-0607 87891-0608 87891-0609 87891-0611 87891-0615 87891-0624 87891-0700 87891-0702 87891-0751 87891-0851 87891-0808 87891-0809 87891-2007 - - 87891-0508 87891-2601 87891-3007 87891-3600 87891-4008 - CKT VOID KINK PIN SIZE PIN 05 05 05 05 05 05 05 05 05 05 05 06 06 06 06 06 06 06 06 06 06 06 07 07 07 07 08 08 08 08 26 18 18 18 20 28 28 28 30 36 40 40 2 2 2 4 - 2,4 2&4 4,7,17 - OAL MATING END (F) 13.62 10.80 45.00 45.00 10.92 11.38 19.49 32.49 23.62 7.29 10.10 9.89 11.30 12.80 11.30 11.30 13.75 18.03 28.30 28.30 22.99 21.99 14.49 26.10 11.94 11.94 13.74 13.72 8.08 5.89 13.51 13.51 5.84 5.84 13.00 16.00 17.32 2.40 2.80 5.84 8.00 5.84 5.84 8.08 13.54 22.16 22.16 16.00 10.00 19.81 6.10 6.10 8.00 9.65 3.05 2.41 29.00 29.00 2.59 3.05 4.00 14.00 3.81 2.40 4.60 2.97 2.31 2.97 2.97 3.18 2.00 3.65 3.65 3.50 2.00 3.80 3.30 3.30 3.25 1.78 13.59 18.36 18.36 18.36 18.36 18.36 18.36 - 8.00 7.90 13.72 5.84 5.59 13.21 13.21 13.21 9.50 13.21 13.21 13.21 5.84 6.09 5.84 5.84 3.25 2.20 4.32 2.97 3.05 1.50 1.50 1.50 9.50 1.50 1.50 1.50 2.97 3.18 2.97 3.81 13.74 12.59 20.53 11.30 11.13 17.20 17.20 17.20 21.49 17.20 17.20 17.20 11.30 11.56 11.30 12.14 CAP PLATING TYPE REMARKS F OPTION M 5 5 5 3 3 5 5 4 5 5 5 1 5 5 5 5 5 5 5 5 1 5 5 5 5 6 5 5 3 5 3 5 5 3 1 5 5 3 5 2 5 3 A A A A A A A A A - - D17 E D D17 D17 C D17 D17 B D17 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: P/N ADDED IN TABLE = 0 = 0 = 0 mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± DIVISIONAL SYMBOLS 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2021/07/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:39:19 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 670360 DRWN: VIJAYS4 CHK'D: ABABUPS APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: KCHO APPR: SCLOW THIRD ANGLE PROJECTION 2021/07/07 2021/07/15 2021/07/15 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/24 2004/04/08 DRAWING SERIES A3-SIZE 87891 3 CUSTOM HEADER 2.54MM PITCH, SINGLE ROW SINGLE WAFER, T/H HEADER SD-87891-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D17 SHEET NUMBER 4 OF 4 1 A