0878980856

10 9 7 8 5 6 4 B F CKT 1 B 0.32 2.40 TYP (2.51) 2.96 TYP CKT 1 E CKT 6 CKT 6 1.27 TYP ( 10 7.50 RECOMMENDED PCB LAYOUT: COMPONENT SIDE ) (4.50) 0.64 ±0.05 SQ TYP D M (G ) (F ) 1.32 TYP 2.49 ±0.10 8 0.15 CKT 2-20 0.20 CKT 21-40 C 2.54 TYP 2 1 NOTES: 1. MATERIAL: HSG: NYLON, GLASS-FILLED, UL94V-0, COLOR: BLACK CAP: NYLON, GLASS-FILLED, UL94V-0, COLOR: BLACK PIN: 0.64MM SQ, COPPER ALLOY 2. PLATING TYPE: (1) GOLD FLASH OVER 1.25µm MIN. NICKEL OVERALL. (2) GOLD FLASH ON CONTACT AND 2.50µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. (4) 0.38µm MIN. GOLD PLATE ON CONTACT AND 2.00µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. (5) 0.75µm MIN. GOLD PLATE ON CONTACT AND 2.00µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. (6) 2.50µm MIN. TIN OVERALL 1.25µm MIN. NICKEL OVERALL 3. PRODUCT SPECIFICATION: PS-87920-019 4. PACKAGING TYPE: SEE TABLE 5. PACKAGING SPEC: TUBE WITH CAP VERSION: PK-89990-558 TUBE W/O CAP VERSION: PK-89990-545 TRAY W/O CAP: PK-89990-489 EMBOSS TAPE WITH CAP: PK-89990-486 AND PK-87898-400 6. WAFER TO BE FLAT WITHIN 0.003 mm/mm 7 BEND DEPRESSION IS ACCEPTED SO LONG AS IT DOES NOT AFFECT THE OVERALL COPLANARITY OF TAIL 8 COPLANARITY IS TO BE MEASURED BY RESTING THE SOLDER TAIL ON A FLAT SURFACE 9 IRREGULAR CIRCUIT CUTOFF WITHIN BREAKAWAY SECTION IS PERMISSIBLE.CUTTING OR CHIPPING OF THE MAIN BODY IS NOT ACCEPTABLE 10 CAP LOCATION IS CENTERED ALONG THE MATING ENDS AS SHOWN. TOP SURFACE OF CAP TO BE FLAT FOR THE PURPOSE OF PICK & PLACE BY VACUUM SUCTION NOZZLE 11. RECOMMENDED PCB THICKNESS IS 1.60mm±0.10 12. THE ABOVE CKT 6 IS FOR ILLUSTRATION PURPOSE ONLY 13. TUBE LENGTH AS PER STANDARD 560mm 2.54 ±0.05 TYP NON-ACCUM A 3 (4.80) 7 F E D C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 1 OF 21 1 A 10 9 8 7 6 5 4 PACKAGING OPTION PART NO. DIMENSION CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE A B F M G WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP -----------------------------3 1 7.62 5.08 10.81 9.65 5.84 F 87898-0301 ------------------------87898-0302 3 2 7.62 5.08 10.81 9.65 5.84 ------------------------4 87898-0304 87898-0314 3 7.62 5.08 10.81 9.65 5.84 ------------------------5 87898-0305 87898-0315 3 7.62 5.08 10.81 9.65 5.84 ------------------------87898-0306 87898-0316 3 6 7.62 5.08 10.81 9.65 5.84 ------------------------87898-0307 87898-0320 3 6 7.62 5.08 10.81 9.65 5.84 -------------------------------87898-0317 3 6 7.62 5.08 10.81 9.65 5.84 -------------------------------87898-0321 3 6 7.62 5.08 10.81 9.65 5.84 ---------------------------5 87898-0318 3 7.62 5.08 10.81 9.65 5.84 -------------------------87898-0310 3 6 7.62 5.08 14.91 13.91 10.10 -------------------------87898-0309 3 6 7.62 5.08 14.81 13.81 10.00 E ------------------------------87898-0370 3 6 7.62 5.08 ---- 13.91 10.10 3 2 1 CAP REFER TO LAST SHEET FOR 2CKT SIZE (SEE SHEET-16) 1 1 1 1 1 1 1 1 1 1 1 1 F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 2 OF 21 1 A 10 9 7 8 5 6 4 PACKAGING OPTION PART NO. MODIFIED MODIFIED CKT VOID PLATING MATING MATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE CKT LENGTH WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP ---------------4 ------------87898-0421 87898-0431 87898-0451 1 F ---------------4 ------------87898-0422 87898-0432 87898-0452 2 ---------------4 ----4 --------87898-0424 87898-0434 87898-0454 ---------------4 ----5 --------87898-0425 87898-0435 87898-0455 ---------------4 ------------87898-0426 87898-0436 87898-0456 6 ---------------4 ------------87898-0428 87898-0437 87898-0460 6 ------------------------4 ------------87898-0457 6 -----------------------4 ----5 --------87898-0458 --------------------4 5 --------87898 - 0480 CKT# 4 --------------------4 ----5 87898 - 0481 1.00 CKT # 1, 2 & 3 --------------------4 ------87898 0482 1.00 CKT # 1, 2 & 3 E --------------------4 ------87898 - 0483 1.00 CKT # 1, 2 & 3 --------------------4 --------------87898-0427 --------------------4 ----5 --------87898 - 0488 D C 3 2 DIMENSION 1 CAP A B G F M (SEE SHEET-16) 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 7.62 7.62 7.62 7.62 7.62 7.62 7.62 7.62 10.81 10.81 10.81 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 5.84 5.84 5.84 10.16 10.16 10.16 10.16 10.16 10.16 7.62 7.62 7.62 7.62 7.62 7.62 14.70 17.70 --14.70 --17.78 13.65 16.65 16.65 13.65 11.87 16.74 9.84 12.84 12.84 9.84 8.06 12.93 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ------------------------------87898-0581 ------ ---------------------------------------- 87898-0521 87898-0522 87898-0524 87898-0525 87898-0526 87898-0528 ---------- 87898-0531 87898-0532 87898-0534 87898-0535 87898-0536 87898-0538 ---------- --------------------87898-0583 87898-0584 ---------- 87898-0551 87898-0552 87898-0554 87898-0555 87898-0556 87898-0558 ----87898-0576 5 5 5 5 5 5 5 5 ---------------------------------- 1 2 4 5 6 6 4 5 --------------------------------- --------------------------------- 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.81 9.65 5.84 10.81 9.65 5.84 10.81 9.65 5.84 10.81 9.65 5.84 10.81 9.65 5.84 10.81 9.65 5.84 --24.18 20.25 14.35 13.31 9.50 1 1 1 1 1 1 1 1 ------------------------------87898-0607 ---------- --------------------------------------------- 87898-0621 87898-0622 87898-0624 87898-0625 87898-0626 87898-0628 ---------87898-0604 87898-0631 87898-0632 87898-0634 87898-0635 87898-0636 87898-0638 --------------- --------------------------------------------- 87898-0651 87898-0652 87898-0654 87898-0655 87898-0656 87898-0658 87898-0657 87898-0605 ------ 6 6 6 6 6 6 6 6 6 ------------------------------------ 1 2 4 5 6 6 6 5 5 ------------------------------------- ------------------------------------- 15.24 15.24 15.24 15.24 15.24 15.24 15.24 15.24 15.24 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 10.81 9.65 5.84 10.81 9.65 5.84 10.81 9.65 5.84 10.81 9.65 5.84 10.81 9.65 5.84 10.81 9.65 5.84 16.47 15.31 11.50 12.98 11.94 8.13 --13.31 9.50 1 1 1 1 1 1 1 1 1 F E D C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 3 OF 21 1 A 10 9 7 8 5 6 4 PACKAGING OPTION PART NO. DIMENSION CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE A B F M G WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP ---------------7 ----87898-0721 87898-0731 87898-0751 1 17.78 15.24 10.81 9.65 5.84 F ---------------7 ----87898-0722 87898-0732 87898-0752 2 17.78 15.24 10.81 9.65 5.84 ---------------7 ----4 87898-0724 87898-0734 87898-0754 17.78 15.24 10.81 9.65 5.84 ---------------7 ----5 87898-0725 87898-0735 87898-0755 17.78 15.24 10.81 9.65 5.84 ---------------7 ----87898-0726 87898-0736 87898-0756 6 17.78 15.24 10.81 9.65 5.84 ---------------7 ----87898-0727 87898-0737 87898-0758 6 17.78 15.24 10.81 9.65 5.84 -------------------------7 -------87898-0757 6 17.78 15.24 9.65 5.84 -------------------------7 -------87898-0759 6 17.78 15.24 9.65 5.84 --------------------7 ----5 --87898-0720 17.78 15.24 9.81 6.00 --------------------7 ----5 --87898-0767 17.78 15.24 13.81 10.00 3 2 1 CAP (SEE SHEET-16) 1 1 1 1 1 1 1 1 1 1 F E E ------------------------------87898-0881 ----------------------------------- 87898-0821 87898-0822 87898-0824 87898-0825 87898-0826 87898-0827 ----- 87898-0831 87898-0832 87898-0834 87898-0835 87898-0836 87898-0837 ----- ----------------------------------- 87898-0851 87898-0852 87898-0854 87898-0855 87898-0856 87898-0857 ----- 8 8 8 8 8 8 8 ---------------------------- 1 2 4 5 6 6 4 20.32 20.32 20.32 20.32 20.32 20.32 20.32 17.78 17.78 17.78 17.78 17.78 17.78 17.78 10.81 9.65 10.81 9.65 10.81 9.65 10.81 9.65 10.81 9.65 10.81 9.65 --21.84 5.84 5.84 5.84 5.84 5.84 5.84 17.91 1 1 1 1 1 1 1 -------------------------- -------------------------- 87898-0921 87898-0922 87898-0924 87898-0925 87898-0926 87898-0931 87898-0932 87898-0934 87898-0935 87898-0936 -------------------------- 87898-0951 87898-0952 87898-0954 87898-0955 87898-0956 9 9 9 9 9 --------------------- 1 2 4 5 6 22.86 22.86 22.86 22.86 22.86 20.32 20.32 20.32 20.32 20.32 10.81 10.81 10.81 10.81 10.81 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 D D 9.65 9.65 9.65 9.65 9.65 C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 4 OF 21 1 A 10 9 7 8 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP -------------------87898-1021 87898-1031 87898-1051 10 1 F -------------------87898-1022 87898-1032 87898-1052 10 2 -------------------4 87898-1024 87898-1034 87898-1054 10 -------------------5 87898-1025 87898-1035 87898-1055 10 -------------------87898-1026 87898-1036 87898-1056 10 6 -------------------87898-1027 87898-1037 87898-1057 10 6 -------------------------5 87898-1003 10 E D 4 DIMENSION 3 2 1 CAP A B G F M (SEE SHEET-16) 25.40 25.40 25.40 25.40 25.40 25.40 25.40 22.86 22.86 22.86 22.86 22.86 22.86 22.86 10.81 10.81 10.81 10.81 10.81 10.81 --- 9.65 9.65 9.65 9.65 9.65 9.65 9.81 5.84 5.84 5.84 5.84 5.84 5.84 6.00 1 1 1 1 1 1 1 -------------------------- -------------------------- 87898-1121 87898-1122 87898-1124 87898-1125 87898-1126 87898-1131 87898-1132 87898-1134 87898-1135 87898-1136 -------------------------- 87898-1151 87898-1152 87898-1154 87898-1155 87898-1156 11 11 11 11 11 --------------------- 1 2 4 5 6 27.94 27.94 27.94 27.94 27.94 25.40 25.40 25.40 25.40 25.40 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 -------------------------- -------------------------- 87898-1221 87898-1222 87898-1224 87898-1225 87898-1226 87898-1231 87898-1232 87898-1234 87898-1235 87898-1236 -------------------------- 87898-1251 87898-1252 87898-1254 87898-1255 87898-1256 12 12 12 12 12 --------------------- 1 2 4 5 6 30.48 30.48 30.48 30.48 30.48 27.94 27.94 27.94 27.94 27.94 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 5 OF 21 1 A 10 9 7 8 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP -------------------87898-1321 87898-1331 87898-1351 13 1 F -------------------87898-1322 87898-1332 87898-1352 13 2 -------------------4 87898-1324 87898-1334 87898-1354 13 -------------------5 87898-1325 87898-1335 87898-1355 13 -------------------87898-1326 87898-1336 87898-1356 13 6 E 4 DIMENSION 3 2 1 CAP A B G F M (SEE SHEET-16) 33.02 33.02 33.02 33.02 33.02 30.48 30.48 30.48 30.48 30.48 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 ------------------------------- ------------------------------- 87898-1421 87898-1422 87898-1424 87898-1425 87898-1426 87898-1427 87898-1431 87898-1432 87898-1434 87898-1435 87898-1436 87898-1437 ------------------------------- 87898-1451 87898-1452 87898-1454 87898-1455 87898-1456 87898-1457 14 14 14 14 14 14 ------------------------- 1 2 4 5 6 6 35.56 35.56 35.56 35.56 35.56 35.56 33.02 33.02 33.02 33.02 33.02 33.02 10.81 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 1 -------------------------- -------------------------- 87898-1521 87898-1522 87898-1524 87898-1525 87898-1526 87898-1531 87898-1532 87898-1534 87898-1535 87898-1536 -------------------------- 87898-1551 87898-1552 87898-1554 87898-1555 87898-1556 15 15 15 15 15 --------------------- 1 2 4 5 6 38.10 38.10 38.10 38.10 38.10 35.56 35.56 35.56 35.56 35.56 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 6 OF 21 1 A 10 9 7 8 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP -------------------87898-1621 87898-1631 87898-1651 16 1 F -------------------87898-1622 87898-1632 87898-1652 16 2 -------------------4 87898-1624 87898-1634 87898-1654 16 -------------------5 87898-1625 87898-1635 87898-1655 16 -------------------87898-1626 87898-1636 87898-1656 16 6 -------------------87898-1627 87898-1637 87898-1657 16 6 E D 4 DIMENSION 3 2 1 CAP A B G F M (SEE SHEET-16) 40.64 40.64 40.64 40.64 40.64 40.64 38.10 38.10 38.10 38.10 38.10 38.10 10.81 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 1 -------------------------- -------------------------- 87898-1721 87898-1722 87898-1724 87898-1725 87898-1726 87898-1731 87898-1732 87898-1734 87898-1735 87898-1736 -------------------------- 87898-1751 87898-1752 87898-1754 87898-1755 87898-1756 17 17 17 17 17 --------------------- 1 2 4 5 6 43.18 43.18 43.18 43.18 43.18 40.64 40.64 40.64 40.64 40.64 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 ------------------------------- ------------------------------- 87898-1821 87898-1822 87898-1824 87898-1825 87898-1826 87898-1827 87898-1831 87898-1832 87898-1834 87898-1835 87898-1836 87898-1837 ------------------------------- 87898-1851 87898-1852 87898-1854 87898-1855 87898-1856 87898-1857 18 18 18 18 18 18 ------------------------- 1 2 4 5 6 6 45.72 45.72 45.72 45.72 45.72 45.72 43.18 43.18 43.18 43.18 43.18 43.18 10.81 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 1 F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 7 OF 21 1 A 10 9 7 8 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP -------------------87898-1921 87898-1931 87898-1951 19 1 F -------------------87898-1922 87898-1932 87898-1952 19 2 -------------------4 87898-1924 87898-1934 87898-1954 19 -------------------5 87898-1925 87898-1935 87898-1955 19 -------------------87898-1926 87898-1936 87898-1956 19 6 E 4 DIMENSION 3 2 1 CAP A B G F M (SEE SHEET-16) 48.26 48.26 48.26 48.26 48.26 45.72 45.72 45.72 45.72 45.72 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 ------------------------------- ------------------------------- 87898-2021 87898-2022 87898-2024 87898-2025 87898-2026 87898-2027 87898-2031 87898-2032 87898-2034 87898-2035 87898-2036 87898-2037 ------------------------------- 87898-2051 87898-2052 87898-2054 87898-2055 87898-2056 87898-2057 20 20 20 20 20 20 ------------------------- 1 2 4 5 6 6 50.80 50.80 50.80 50.80 50.80 50.80 48.26 48.26 48.26 48.26 48.26 48.26 10.81 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 1 -------------------------- -------------------------- 87898-2121 87898-2122 87898-2124 87898-2125 87898-2126 87898-2131 87898-2132 87898-2134 87898-2135 87898-2136 -------------------------- 87898-2151 87898-2152 87898-2154 87898-2155 87898-2156 21 21 21 21 21 --------------------- 1 2 4 5 6 53.34 53.34 53.34 53.34 53.34 50.80 50.80 50.80 50.80 50.80 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 8 OF 21 1 A 10 9 7 8 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP ------------------------87898-2221 87898-2231 22 1 F ------------------------87898-2222 87898-2232 22 2 ------------------------4 87898-2224 87898-2234 22 ------------------------5 87898-2225 87898-2235 22 ------------------------87898-2226 87898-2236 22 6 E 4 DIMENSION 3 2 1 CAP A B G F M (SEE SHEET-16) 55.88 55.88 55.88 55.88 55.88 53.34 53.34 53.34 53.34 53.34 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 -------------------------- -------------------------- 87898-2321 87898-2322 87898-2324 87898-2325 87898-2326 87898-2331 87898-2332 87898-2334 87898-2335 87898-2336 -------------------------- -------------------------- 23 23 23 23 23 --------------------- 1 2 4 5 6 58.42 58.42 58.42 58.42 58.42 55.88 55.88 55.88 55.88 55.88 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 ------------------------------- ------------------------------- 87898-2421 87898-2422 87898-2424 87898-2425 87898-2426 87898-2427 87898-2431 87898-2432 87898-2434 87898-2435 87898-2436 87898-2437 ------------------------------- ------------------------------- 24 24 24 24 24 24 ------------------------- 1 2 4 5 6 6 60.96 60.96 60.96 60.96 60.96 60.96 58.42 58.42 58.42 58.42 58.42 58.42 10.81 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 1 F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 9 OF 21 1 A 10 9 7 8 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP ------------------------87898-2521 87898-2531 25 1 F ------------------------87898-2522 87898-2532 25 2 ------------------------4 87898-2524 87898-2534 25 ------------------------5 87898-2525 87898-2535 25 ------------------------87898-2526 87898-2536 25 6 E 4 DIMENSION 3 2 1 CAP A B G F M (SEE SHEET-16) 63.50 63.50 63.50 63.50 63.50 60.96 60.96 60.96 60.96 60.96 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 ------------------------------- ------------------------------- 87898-2621 87898-2622 87898-2624 87898-2625 87898-2626 87898-2627 87898-2631 87898-2632 87898-2634 87898-2635 87898-2636 87898-2637 ------------------------------- ------------------------------- 26 26 26 26 26 26 ------------------------- 1 2 4 5 6 6 66.04 66.04 66.04 66.04 66.04 66.04 63.50 63.50 63.50 63.50 63.50 63.50 10.81 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 1 -------------------------- -------------------------- 87898-2721 87898-2722 87898-2724 87898-2725 87898-2726 87898-2731 87898-2732 87898-2734 87898-2735 87898-2736 -------------------------- -------------------------- 27 27 27 27 27 --------------------- 1 2 4 5 6 68.58 68.58 68.58 68.58 68.58 66.04 66.04 66.04 66.04 66.04 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 10 OF 21 1 A 10 9 7 8 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP ------------------------87898-2821 87898-2831 28 1 F ------------------------87898-2822 87898-2832 28 2 ------------------------4 87898-2824 87898-2834 28 ------------------------5 87898-2825 87898-2835 28 ------------------------87898-2826 87898-2836 28 6 E 4 DIMENSION 3 2 1 CAP A B G F M (SEE SHEET-16) 71.12 71.12 71.12 71.12 71.12 68.58 68.58 68.58 68.58 68.58 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 -------------------------- -------------------------- 87898-2921 87898-2922 87898-2924 87898-2925 87898-2926 87898-2931 87898-2932 87898-2934 87898-2935 87898-2936 -------------------------- -------------------------- 29 29 29 29 29 --------------------- 1 2 4 5 6 73.66 73.66 73.66 73.66 73.66 71.12 71.12 71.12 71.12 71.12 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 -------------------------- -------------------------- 87898-3021 87898-3022 87898-3024 87898-3025 87898-3026 87898-3031 87898-3032 87898-3034 87898-3035 87898-3036 -------------------------- -------------------------- 30 30 30 30 30 --------------------- 1 2 4 5 6 76.20 76.20 76.20 76.20 76.20 73.66 73.66 73.66 73.66 73.66 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 11 OF 21 1 A 10 9 7 8 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP ------------------------87898-3121 87898-3131 31 1 F ------------------------87898-3122 87898-3132 31 2 ------------------------4 87898-3124 87898-3134 31 ------------------------5 87898-3125 87898-3135 31 ------------------------87898-3126 87898-3136 31 6 E 4 DIMENSION 3 2 1 CAP A B G F M (SEE SHEET-16) 78.74 78.74 78.74 78.74 78.74 76.20 76.20 76.20 76.20 76.20 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 ------------------------------- ------------------------------- 87898-3221 87898-3222 87898-3224 87898-3225 87898-3226 87898-3227 87898-3231 87898-3232 87898-3234 87898-3235 87898-3236 87898-3237 ------------------------------- ------------------------------- 32 32 32 32 32 32 ------------------------- 1 2 4 5 6 6 81.28 81.28 81.28 81.28 81.28 81.28 78.74 78.74 78.74 78.74 78.74 78.74 10.81 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 1 -------------------------- -------------------------- 87898-3321 87898-3322 87898-3324 87898-3325 87898-3326 87898-3331 87898-3332 87898-3334 87898-3335 87898-3336 -------------------------- -------------------------- 33 33 33 33 33 --------------------- 1 2 4 5 6 83.82 83.82 83.82 83.82 83.82 81.28 81.28 81.28 81.28 81.28 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 12 OF 21 1 A 10 9 7 8 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP ------------------------87898-3421 87898-3431 34 1 F ------------------------87898-3422 87898-3432 34 2 ------------------------4 87898-3424 87898-3434 34 ------------------------5 87898-3425 87898-3435 34 ------------------------87898-3426 87898-3436 34 6 E 4 DIMENSION 3 2 1 CAP A B G F M (SEE SHEET-16) 86.36 86.36 86.36 86.36 86.36 83.82 83.82 83.82 83.82 83.82 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 -------------------------- -------------------------- 87898-3521 87898-3522 87898-3524 87898-3525 87898-3526 87898-3531 87898-3532 87898-3534 87898-3535 87898-3536 -------------------------- -------------------------- 35 35 35 35 35 --------------------- 1 2 4 5 6 88.90 88.90 88.90 88.90 88.90 86.36 86.36 86.36 86.36 86.36 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 -------------------------- -------------------------- 87898-3621 87898-3622 87898-3624 87898-3625 87898-3626 87898-3631 87898-3632 87898-3634 87898-3635 87898-3636 -------------------------- -------------------------- 36 36 36 36 36 --------------------- 1 2 4 5 6 91.44 91.44 91.44 91.44 91.44 88.90 88.90 88.90 88.90 88.90 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 13 OF 21 1 A 10 9 7 8 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP ------------------------87898-3721 87898-3731 37 1 F ------------------------87898-3722 87898-3732 37 2 ------------------------4 87898-3724 87898-3734 37 ------------------------5 87898-3725 87898-3735 37 ------------------------87898-3726 87898-3736 37 6 E 4 DIMENSION 3 2 1 CAP A B G F M (SEE SHEET-16) 93.98 93.98 93.98 93.98 93.98 91.44 91.44 91.44 91.44 91.44 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 -------------------------- -------------------------- 87898-3821 87898-3822 87898-3824 87898-3825 87898-3826 87898-3831 87898-3832 87898-3834 87898-3835 87898-3836 -------------------------- -------------------------- 38 38 38 38 38 --------------------- 1 2 4 5 6 96.52 96.52 96.52 96.52 96.52 93.98 93.98 93.98 93.98 93.98 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 -------------------------- -------------------------- 87898-3921 87898-3922 87898-3924 87898-3925 87898-3926 87898-3931 87898-3932 87898-3934 87898-3935 87898-3936 -------------------------- -------------------------- 39 39 39 39 39 --------------------- 1 2 4 5 6 99.06 99.06 99.06 99.06 99.06 96.52 96.52 96.52 96.52 96.52 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 14 OF 21 1 A 10 9 8 7 5 6 PACKAGING OPTION PART NO. CKT VOID PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE POSITION TYPE WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP ------------------------87898-4021 87898-4031 40 1 F ------------------------87898-4022 87898-4032 40 2 ------------------------4 87898-4024 87898-4034 40 ------------------------5 87898-4025 87898-4035 40 ------------------------87898-4026 87898-4036 40 6 4 3 DIMENSION 2 1 CAP A B G F M (SEE SHEET-16) 101.60 101.60 101.60 101.60 101.60 99.06 99.06 99.06 99.06 99.06 10.81 10.81 10.81 10.81 10.81 9.65 9.65 9.65 9.65 9.65 5.84 5.84 5.84 5.84 5.84 1 1 1 1 1 F E E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 15 OF 21 1 A 10 9 7 8 5 6 4 3 2 1 CAP ORIENTATION (CAP - 1) FOR ILLUSTRATION OF EVEN CKT (6 CKT AS SHOWN) F (7.50) (4.50) F FOR ILLUSTRATION OF ODD CKT (7 CKT AS SHOWN) B 1.27 B (G) E E C/L OF DIM B C/L OF CAP C/L OF CAP C/L OF DIM B = C/L OF CAP (FOR ODD CKT) C/L OF DIM B IS OFFSET BY 1.27MM WITH C/L OF CAP (FOR EVEN CKT) D C/L OF DIM B D CAP ORIENTATION (CAP - 2) FOR ILLUSTRATION OF ODD CKT (4.50) (5.00) FOR ILLUSTRATION OF EVEN CKT (5CKT AS SHOWN) (4CKT AS SHOWN) B B (1.27) (G) C C C/L OF CAP C/L OF DIM B C/L OF DIM B C/L OF CAP C/L OF DIM B = C/L OF CAP C/L OF DIM B IS OFFSET BY 1.27MM WITH C/L OF CAP (FOR EVEN CKT) (FOR ODD CKT) PART ORIENTATION IN TUBE B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 PART WITH CAP RELEASE DATE 9 2023/04/10 ± ± 0 PLACES ± ± ANGULAR TOL ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± 0.2 ± 1 PLACE PART WITHOUT CAP INCH ± 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 16 OF 21 1 A 10 9 7 8 5 6 4 3 2 CKT EMBOSSED CARRIER TYPE 'A' W 8.02 5.20 13.60 11.50 24.00 8.02 5.20 13.60 11.50 24.00 F 10.55 5.20 13.60 11.50 24.00 4 4.00 ±0.10 ⌀ 1.50 +0.10 0.00 CUSTOMER PULL OUT DIRECTION DIMENSION Ao Ko F Bo 2 3 4 F 1 2.00 ±0.10 1.75 ±0.10 5 0.60 E +0.10 0.00 E Bo ±0.10 W ±0.30 F ±0.10 12.00 ±0.10 330 MAX. D 10° D Ao ±0.10 3° NOTES: 1. LEADER AND TRAILER TAPE 390 MIN. TOP TAPE NON BONDED TAPE 160 MIN. TAIL PART TRAILER C Ko ±0.10 PART PACK IN E/TAPE ORIENTATION (FOR REF USE) COMPONENT 160 MIN. TAIL PART (EMPTY) 230 MIN. LEADER PART (EMPTY) PULL OUT DIRECTION C 2. PEELING OFF FORCE OF THE TOP TAPE: 20 - 80gf. (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) PEEL OF DIRECTION 15° MAX. B B PULL OUT DIRECTION 3. MATERIAL: BLACK P.S CONDUCTIVE, BLACK 4 A MEASURED FROM CENTRELINE OF SPROCKET HOLE TO CENTRELINE OF SPOCKET THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 5 CUMULATIVE TOLERANCE OF 10 SPROCKET HOLE IS ±0.20mm 6. A0 AND B0 ARE MEASURE FROM ABOVE POCKET BASE 0.30mm 7. TAPE AND REEL SPECIFICATION IS AS PER EIA-481. 8. TAPE AND REEL QUANTITY : 440PCS/REEL 9. THE TAPE IS TREATED FOR ANTI-STATIC. 10. ALL RADIUS ARE 0.30MM UNLESS SPECIFY 11. SURFACE RESISTIVITY 103 TO 10 OHMS. DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/04/10 SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 2 PLACES ± INCH ± 3 PLACES ± ± 0.2 ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 DIMENSION UNITS 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 17 OF 21 1 A 10 9 7 8 6 5 4 3 2 CKT 5 1 DIMENSION Bo Ao Ko F W 13.10 5.20 11.30 11.50 24.00 F F 4 4.00 ±0.10 ⌀ 1.50 +0.10 0.00 2.00 ±0.10 1.75 ±0.10 5 0.60 +0.10 0.00 CUSTOMER PULL OUT DIRECTION E Bo ±0.10 W ±0.30 F ±0.10 E 12.00 ±0.10 10° 330 MAX. D D 390 MIN. TOP TAPE NON BONDED TAPE 160 MIN. TAIL PART TRAILER Ko ±0.10 COMPONENT 160 MIN. TAIL PART (EMPTY) C Ao ±0.10 3° NOTES: 1. LEADER AND TRAILER TAPE 230 MIN. LEADER PART (EMPTY) PULL OUT DIRECTION PART PACK IN E/TAPE ORIENTATION (FOR REF USE) C 2. PEELING OFF FORCE OF THE TOP TAPE: 20 - 80gf. (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) PEEL OF DIRECTION 15° MAX. PULL OUT DIRECTION 3. MATERIAL: BLACK P.S CONDUCTIVE, BLACK B MEASURED FROM CENTRELINE OF SPROCKET HOLE TO CENTRELINE OF SPOCKET 5. CUMULATIVE TOLERANCE OF 10 SPROCKET HOLE IS ±0.20mm 4 B 6 A0 AND B0 ARE MEASURE FROM ABOVE POCKET BASE 0.30mm 7. TAPE AND REEL SPECIFICATION IS AS PER EIA-481. 8. TAPE AND REEL QUANTITY : 440PCS/REEL 9. THE TAPE IS TREATED FOR ANTI-STATIC. 10. ALL RADIUS ARE 0.30MM UNLESS SPECIFY 11. SURFACE RESISTIVITY 103 TO 10 OHMS. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL P1 RELEASE DATE 9 2023/04/10 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE DOCUMENT STATUS INCH ± 3 PLACES ± FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 CURRENT REV DESC: 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 18 OF 21 1 A 10 9 7 8 5 6 4 3 CKT TYPE A 0.50 ±0.05 6 6 8 F Bo Ko 10 12 14 16 18 20 +0.20 -0.10 +0.20 -0.10 TYPE B 24.00 ±0.10 4 E M Bo 11.50 15.65 15.65 20.70 25.80 30.90 5.84 35.95 41.05 46.20 51.20 2 DIMENSION Ao Ko So 28.40 5.20 16.90 28.40 5.20 11.30 40.40 5.20 11.30 40.40 5.20 11.30 52.40 5.20 11.30 52.40 5.20 11.30 52.40 5.20 11.30 68.40 5.20 11.30 68.40 5.20 11.30 1 F W 14.20 14.20 20.20 20.20 26.20 26.20 26.20 34.20 34.20 32.00 32.00 44.00 44.00 56.00 56.00 56.00 72.00 72.00 TYPE QTY/ REEL A 150 F 440 B 4.00 ±0.10 ⌀ 1.50 +0.10 2.00 ±0.10 0 1.75 ±0.10 5 0.60 +0.10 0.00 E M CUSTOMER PULL OUT DIRECTION FOR ILLUSTRATION ONLY Bo ±0.10 D W ±0.30 So ±0.10 F ±0.10 D 330 MAX. NOTES: 1. LEADER AND TRAILER TAPE 390 MIN. TOP TAPE NON BONDED TAPE 160 MIN. TAIL PART TRAILER 12.00 ±0.10 R 0.75 OF C COMPONENT 10° PULL OUT DIRECTION 160 MIN. TAIL PART (EMPTY) Ao ±0.10 230 MIN. LEADER PART (EMPTY) 3° Ko ±0.10 2. PEELING OFF FORCE OF THE TOP TAPE: 20 - 80gf. (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) PEEL OF DIRECTION PART PACK IN E/TAPE ORIENTATION(FOR REF USE) 15° MAX. B C 0.20 ±0.05 B PULL OUT DIRECTION 3. MATERIAL: BLACK P.S CONDUCTIVE, BLACK 4 A MEASURED FROM CENTRELINE OF SPROCKET HOLE TO CENTRELINE OF SPOCKET THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 5 CUMULATIVE TOLERANCE OF 10 SPROCKET HOLE IS ±0.20mm 6. A0 AND B0 ARE MEASURE FROM ABOVE POCKET BASE 0.30mm 7. TAPE AND REEL SPECIFICATION IS AS PER EIA-481. 8. TAPE AND REEL QUANTITY : SEE TABLE 9. THE TAPE IS TREATED FOR ANTI-STATIC. 10. ALL RADIUS ARE 0.30MM UNLESS SPECIFY 11. SURFACE RESISTIVITY 103 TO 10 OHMS. DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/04/10 SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 2 PLACES ± INCH ± 3 PLACES ± ± 0.2 ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 DIMENSION UNITS 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 19 OF 21 1 A 10 9 7 8 5 6 4 3 2 1 F F 4 4.00 ±0.10 2.00 ±0.10 ⌀ 1.50 +0.10 5 1.75 ±0.10 0 0.60 +0.10 0.00 CUSTOMER PULL OUT DIRECTION F ±0.10 330 MAX. D W ±0.30 Bo ±0.10 E So ±0.10 E 12.00 ±0.10 D R 0.75 10° OF Ao ±0.10 NOTES: 1. LEADER AND TRAILER TAPE 3° 0.20 ±0.05 390 MIN. TOP TAPE NON BONDED TAPE 160 MIN. TAIL PART TRAILER C Ko ±0.10 C COMPONENT 160 MIN. TAIL PART (EMPTY) 230 MIN. LEADER PART (EMPTY) PULL OUT DIRECTION PART PACK IN E/TAPE ORIENTATION (FOR REF USE) CKT 7 9 11 13 15 17 19 21 2. PEELING OFF FORCE OF THE TOP TAPE: 20 - 80gf. (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) PEEL OF DIRECTION 15° MAX. B Bo 18.20 23.25 28.35 33.40 38.50 43.60 48.70 53.80 So 40.40 40.40 40.40 52.40 52.40 68.40 68.40 68.40 DIMENSION Ao Ko 5.20 5.20 5.20 5.20 5.20 5.20 5.20 5.20 11.30 11.30 11.30 11.30 11.30 11.30 11.30 11.30 W F 20.20 20.20 20.20 26.20 26.20 34.20 34.20 34.20 44.00 44.00 44.00 56.00 56.00 72.00 72.00 72.00 B PULL OUT DIRECTION 3. MATERIAL: BLACK P.S CONDUCTIVE, BLACK 4 A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION MEASURED FROM CENTRELINE OF SPROCKET HOLE TO CENTRELINE OF SPOCKET DOCUMENT STATUS P1 RELEASE DATE 9 2023/04/10 NTS MM 4 PLACES ± CURRENT REV DESC: 2 PLACES ± INCH ± 3 PLACES ± ± 0.2 ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 SCALE mm GENERAL TOLERANCES (UNLESS SPECIFIED) 5 CUMULATIVE TOLERANCE OF 10 SPROCKET HOLE IS ±0.20mm 6. A0 AND B0 ARE MEASURE FROM ABOVE POCKET BASE 0.30mm 7. TAPE AND REEL SPECIFICATION IS AS PER EIA-481. 8. TAPE AND REEL QUANTITY : 440PCS/REEL 9. THE TAPE IS TREATED FOR ANTI-STATIC. 10. ALL RADIUS ARE 0.30MM UNLESS SPECIFY 11. SURFACE RESISTIVITY 103 TO 10 OHMS. FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 DIMENSION UNITS 7 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 20 OF 21 1 A 10 9 7 8 4 3 2 1 PACKAGING OPTION PART NO. DIMENSION CKT PLATING TRAY TRAY TUBE TUBE TAPE & REEL TAPE & REEL SIZE TYPE F M G WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP WITHOUT CAP WITH CAP -------------------------4 87898-0218 2 10.69 9.65 5.84 -------------------------87898-0219 2 6 10.69 9.65 5.84 -------------------------87898-0220 2 6 10.64 9.60 5.84 --------------------87898-0221 2 6 24.53 23.49 19.73 5.08 2.54 F 2.54 5 6 2.40 TYP CAP (SEE SHEET-16) F 2 2 - 2.60 3.80 NOTES: 1. MATERIAL: HSG: LCP, GLASS-FILLED, UL94V-0, COLOR: BLACK CAP: NYLON, GLASS-FILLED, UL94V-0, COLOR: BLACK PIN: 0.64MM SQ, COPPER ALLOY 2. PLATING TYPE: (1) GOLD FLASH OVER 1.25µm MIN. NICKEL OVERALL. (2) GOLD FLASH ON CONTACT AND 2.50µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. (4) 0.38µm MIN. GOLD PLATE ON CONTACT AND 2.00µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. (5) 0.75µm MIN. GOLD PLATE ON CONTACT AND 2.00µm MIN. TIN ON SOLDERTAIL OVER 1.25µm MIN. NICKEL OVERALL. (6) 2.50µm MIN. TIN OVERALL 1.25µm MIN. NICKEL OVERALL 3. PRODUCT SPECIFICATION: PS-87920-019 4. PACKAGING TYPE: SEE TABLE 5. PACKAGING SPEC: TUBE WITH CAP VERSION: PK-89990-558 TUBE W/O CAP VERSION: PK-89990-545 EMBOSS TAPE WITH CAP: PK-87898-400 6. WAFER TO BE FLAT WITHIN 0.003 mm/mm 7 BEND DEPRESSION IS ACCEPTED SO LONG AS IT DOES NOT AFFECT THE OVERALL COPLANARITY OF TAIL 8 COPLANARITY IS TO BE MEASURED BY RESTING THE SOLDER TAIL ON A FLAT SURFACE 9. CAP LOCATION IS CENTERED ALONG THE MATING ENDS AS SHOWN. TOP SURFACE OF CAP TO BE FLAT FOR THE PURPOSE OF PICK & PLACE BY VACUUM SUCTION NOZZLE 10. RECOMMENDED PCB THICKNESS IS 1.60mm±0.10 E ONLY APPLICABLE TO 2CKT SIZE 0.64 ±0.05 SQ TYP ⌀ 0.50 Z X Y 2.54 5.20 1.27 0.64 ±0.05 SQ TYP ⌀ 0.50 Z X Y D M (F ) 3.81 ±0.10 (2X) C 8 Z 0.10 7 (4.50) (5.00) B (G) SCALE mm NTS MM 4 PLACES ± C B CURRENT REV DESC: 2 PLACES ± A P1 RELEASE DATE 9 ± 0.2 ± 0 PLACES ± ± ANGULAR TOL CONN WITH CAP 2023/04/10 7 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:46:21 8 ± ± 1 PLACE CONN WITH CAP INCH ± 3 PLACES ± DOCUMENT STATUS D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS GENERAL TOLERANCES (UNLESS SPECIFIED) FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 E 6 5 4 EC NO: 745488 DRWN: SUAIFR CHK'D: SUAIFR APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: GGUNAGI APPR: ISHWARG THIRD ANGLE PROJECTION 2023/02/15 2023/04/10 2023/04/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/11/09 2016/12/06 DRAWING SERIES A3-SIZE 87898 3 CUSTOM HEADER 2.54MM PITCH SINGLE ROW SINGLE WAFER SMT HEADER SD-87898-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 B26 SHEET NUMBER 21 OF 21 1 A