0879145001

10 9 8 7 6 5 4 3 2.54 ±0.05 TYP NON-ACCUM. 9 A ±0.38 CKT 1 B CKT 1 2.54 ±0.05 E �4.98� 2.54 TYP CKT 2 CKT 2 RECOMMENDED P.C.B HOLE LAYOUT 0.64 ±0.05 SQ TYP D M �G� �F� �2.29� P C 1 NOTES: 1. MATERIAL: HSG: LCP, GLASS-FILLED, UL94V-0, COLOR: BLACK PIN: 0.64MM SQ PIN, COPPER ALLOY 2. PLATING TYPE: (1) : 0.0254 µm GOLD FLASH OVER 1.25 µm MIN. NICKEL OVERALL. (2) : 0.025 µm MIN. GOLD PLATE ON CONTACT AND 1.88 µm MIN. TIN ON SOLDERTAIL OVER 1.25 µm MIN. NICKEL OVERALL. (3) : 0.25 µm MIN. GOLD PLATE ON CONTACT AND 1.88 µm MIN. TIN ON SOLDERTAIL OVER 1.25 µm MIN. NICKEL OVERALL. (4) : 0.38 µm MIN. GOLD PLATE ON CONTACT AND 1.88 µm MIN. TIN ON SOLDERTAIL OVER 1.25 µm MIN. NICKEL OVERALL. (5) : 0.75 µm MIN. GOLD PLATE ON CONTACT AND 1.88 µm MIN. TIN ON SOLDERTAIL OVER 1.25 µm MIN. NICKEL OVERALL (6) : 2.50 µm MIN. TIN IN SELECTED AREA OVER 1.25 µm MIN. NICKEL OVERALL. (7) : 0.38 µm MIN. GOLD PLATE ON CONTACT AND 2.50 µm MIN. TIN ON SOLDERTAIL OVER 1.25 µm MIN. NICKEL OVERALL. (8) : 0.38 µm MIN. GOLD PLATE ON CONTACT AND 0.05 µm MIN. GOLD FLASH ON SOLDERTAIL OVER 1.25 µm MIN. NICKEL OVERALL. (9) : 0.05 - 0.25 µm MIN. GOLD FLASH OVER 1.25 µm MIN. NICKEL OVERALL. 3. PIN PUSHOUT FORCE: 1KG MIN IN EITHER DIRECTION 4. THE ABOVE 14 CKT IS FOR ILLUSTRATION PURPOSE ONLY. 5. FOR PACKAGING OPTION PLEASE REFER TO THE TABLE. 6. RECOMMENDED PCB THICKNESS 1.60MM. 7. PRODUCT SPECIFICATION: PS-87920-019 8. WAFER TO BE FLAT WITHIN 0.003mm/mm 9 . IRREGULAR CIRCUIT CUTOFF WITHIN BREAKAWAY SECTION IS PERMISSIBLE. CUTTING OR CHIPPING OF THE MAIN BODY IS NOT ACCEPTABLE. 10. PARTS ARE NOT STACKABLE ON 2.54 CENTER 11. CAP TO BE PLACED AS CENTRAL OF PART AS POSSIBLE WITH THE TOP SURFACE FLAT FOR PICK AND PLACE. 12. PACKAGING SPECIFICATION: TRAY: PK-89990-489 BULK: PK-89990-491 TUBE: PK-87914-300 F ⌀ 1.14 ±0.05 TYP 2 2.54 TYP B F E D C B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± A 2 PLACES ± DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 ± 0 PLACES ± ± ANGULAR TOL 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE REVISION OF DRAWING MAY BE CHANGED DURING FINAL RELEASED FOR PRODUCTION. ± 0.2 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 1 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------2 1 2.54 ---- 10.92 5.84 2.79 ------------------2 1 2.54 ---- 12.25 7.00 2.96 ------------------2 1 2.54 ---- 13.38 6.09 5.00 ------------------2 2 2.54 ---- 10.92 5.84 2.79 ------------------2 2 2.54 ---- 12.25 7.00 2.96 ------------------2 2 2.54 ---- 13.38 6.09 5.00 ------------------2 3 2.54 ---- 10.92 5.84 2.79 ------------------2 3 2.54 ---- 12.25 7.00 2.96 ------------------2 3 2.54 ---- 13.38 6.09 5.00 ------------------4 2 2.54 ---- 10.92 5.84 2.79 ------------------4 2 2.54 ---- 12.25 7.00 2.96 ------------------4 2 2.54 ---- 13.38 6.09 5.00 ------------------5 2 2.54 ---- 10.92 5.84 2.79 ------------------5 2 2.54 ---- 12.25 7.00 2.96 ------------------5 2 2.54 ---- 13.38 6.09 5.00 ------------------2 6 2.54 ---- 10.92 5.84 2.79 ------------------2 6 2.54 ---- 10.92 5.84 2.79 ------------------2 6 2.54 ---- 12.25 7.00 2.96 ------------------2 6 2.54 ---- 12.25 7.00 2.96 ------------------2 6 2.54 ---- 13.38 6.09 5.00 ---------------------4 2 2.54 ---- 11.11 6.10 2.72 ----------------------5 2 2.54 --- 11.11 6.10 2.72 -----------------------2 6 2.54 --- 11.11 6.10 2.72 -----------------------2 6 2.54 --- 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-0211 87914-0221 87914-0231 87914-0212 87914-0222 87914-0232 87914-0213 87914-0223 87914-0233 E 87914-0214 87914-0224 87914-0234 87914-0215 87914-0225 87914-0235 87914-0216 87914-0217 87914-0226 87914-0227 D 87914-0236 87914-0204 87914-0205 87914-0206 87914-0207 -------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------ F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 2 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------4 ------1 5.08 2.54 10.92 5.84 2.79 ------------4 ------1 5.08 2.54 12.25 7.00 2.96 ------------4 ------1 5.08 2.54 13.38 6.09 5.00 ------------4 ------2 5.08 2.54 10.92 5.84 2.79 ------------4 ------2 5.08 2.54 12.25 7.00 2.96 ------------4 ------2 5.08 2.54 13.38 6.09 5.00 ------------4 ------3 5.08 2.54 10.92 5.84 2.79 ------------4 ------3 5.08 2.54 12.25 7.00 2.96 ------------4 ------3 5.08 2.54 13.38 6.09 5.00 ------------4 ------4 5.08 2.54 10.92 5.84 2.79 ------------4 ------4 5.08 2.54 12.25 7.00 2.96 ------------4 ------4 5.08 2.54 13.38 6.09 5.00 ------------4 ------5 5.08 2.54 10.92 5.84 2.79 ------------4 ------5 5.08 2.54 12.25 7.00 2.96 ------------4 ------5 5.08 2.54 13.38 6.09 5.00 ------------4 ------6 5.08 2.54 10.92 5.84 2.79 ------------4 ------6 5.08 2.54 10.92 5.84 2.79 ------------4 ------6 5.08 2.54 12.25 7.00 2.96 ------------4 ------6 5.08 2.54 12.25 7.00 2.96 ------------4 ------6 5.08 2.54 13.38 6.09 5.00 ----------4 -----4 5.08 2.54 13.21 8.13 2.79 ------------4 ------5 5.08 2.54 13.21 8.13 2.79 -----------4 ------6 5.08 2.54 13.21 8.13 2.79 ---------------4 ------4 5.08 2.54 11.11 6.10 2.72 --------------4 ------5 5.08 2.54 11.11 6.10 2.72 ---------------4 ------6 5.08 2.54 11.11 6.10 2.72 ---------------4 ------6 5.08 2.54 11.11 6.10 2.72 -------4 ------87914-0407 6 5.08 2.54 17.49 12.60 2.60 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-0411 87914-0421 87914-0431 87914-0412 87914-0422 87914-0432 87914-0413 87914-0423 87914-0433 E 87914-0414 87914-0424 87914-0434 87914-0415 87914-0425 87914-0435 87914-0416 87914-0417 87914-0426 87914-0427 D 87914-0436 87914-0401 87914-0402 87914-0403 87914-0404 87914-0405 87914-0406 87914-0408 -------- --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 3 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P G PACKAGING PACKAGING ------------------6 1 7.62 5.08 10.92 5.84 2.79 ---------------------6 1 7.62 5.08 12.25 7.00 2.96 ---------------------6 1 7.62 5.08 13.38 6.09 5.00 ---------------------6 2 7.62 5.08 10.92 5.84 2.79 ---------------------6 2 7.62 5.08 12.25 7.00 2.96 ---------------------6 2 7.62 5.08 13.38 6.09 5.00 ---------------------6 3 7.62 5.08 10.92 5.84 2.79 ---------------------6 3 7.62 5.08 12.25 7.00 2.96 ---------------------6 3 7.62 5.08 13.38 6.09 5.00 ---------------------4 6 7.62 5.08 10.92 5.84 2.79 ---------------------4 6 7.62 5.08 12.25 7.00 2.96 ---------------------4 6 7.62 5.08 13.38 6.09 5.00 ---------------5 87914-0652 6 7.62 5.08 10.92 5.84 2.79 ---------------------5 6 7.62 5.08 12.25 7.00 2.96 ---------------------5 6 7.62 5.08 13.38 6.09 5.00 ---------------------6 6 7.62 5.08 10.92 5.84 2.79 ---------------------6 6 7.62 5.08 10.92 5.84 2.79 ---------------------6 6 7.62 5.08 12.25 7.00 2.96 ---------------------6 6 7.62 5.08 12.25 7.00 2.96 ---------------------6 6 7.62 5.08 13.38 6.09 5.00 ------------------4 6 7.62 5.08 13.21 8.13 2.79 ---------------------5 6 7.62 5.08 13.21 8.13 2.79 ----------------------6 6 7.62 5.08 13.21 8.13 2.79 --------------------4 6 7.62 5.08 11.11 6.10 2.72 ------------------5 6 7.62 5.08 11.11 6.10 2.72 ------------------6 6 7.62 5.08 11.11 6.10 2.72 ------------------6 6 7.62 5.08 11.11 6.10 2.72 --- PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-0611 87914-0621 87914-0631 87914-0612 87914-0622 87914-0632 87914-0613 87914-0623 87914-0633 E 87914-0614 87914-0624 87914-0634 87914-0615 87914-0625 87914-0635 87914-0616 87914-0617 87914-0626 87914-0628 D 87914-0636 87914-0601 87914-0602 87914-0603 87914-0604 87914-0605 87914-0606 87914-0608 ------------------------------------------------------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------------------------------------------------------ F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 4 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION KINK TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION POSITION TYPE A B F M P G PACKAGING PACKAGING ------------------------6 1 7.62 5.08 18.84 13.25 3.30 --------------------------6 2 7.62 5.08 18.84 13.25 3.30 --------------------------6 3 7.62 5.08 18.84 13.25 3.30 --------------------------4 6 7.62 5.08 18.84 13.25 3.30 --------------------------5 6 7.62 5.08 18.84 13.25 3.30 --------------------------6 6 7.62 5.08 18.84 13.25 3.30 --------------------6 6 7.62 5.08 16.49 11.20 3.00 --CKT 1, 3 & 5 ----------------6 6 7.62 5.08 14.78 9.31 3.18 --CKT 1 & 6 --------------87914-0649 6 6 7.62 5.08 13.79 8.20 3.30 14.79 ------------------------6 1 7.62 5.08 21.29 16.00 3.00 --------------------4 87914-0651 6 7.62 5.08 17.29 12.00 3.00 18.29 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-0009 87914-0642 87914-0643 87914-0644 87914-0645 87914-0646 87914-0647 ------------E 87914-0650 ------- ------------------------------------------87914-0648 ------------------- ------------------------------------------------------------------- F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 5 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P G PACKAGING PACKAGING ------------------8 6 10.16 7.62 21.75 16.51 2.95 ---------------------8 6 10.16 7.62 21.75 16.51 2.95 ---------------------8 6 10.16 7.62 16.50 11.11 3.10 ---------------------8 1 10.16 7.62 10.92 5.84 2.79 ---------------------8 1 10.16 7.62 12.25 7.00 2.96 ---------------------8 1 10.16 7.62 13.38 6.09 5.00 ---------------------8 2 10.16 7.62 10.92 5.84 2.79 ---------------------8 2 10.16 7.62 12.25 7.00 2.96 ---------------------8 2 10.16 7.62 13.38 6.09 5.00 ---------------------8 3 10.16 7.62 10.92 5.84 2.79 ---------------------8 3 10.16 7.62 12.25 7.00 2.96 ---------------------4 8 10.16 7.62 13.38 6.09 5.00 ---------------------4 8 10.16 7.62 10.92 5.84 2.79 ---------------------4 8 10.16 7.62 12.25 7.00 2.96 ---------------------4 8 10.16 7.62 13.38 6.09 5.00 ---------------------5 8 10.16 7.62 10.92 5.84 2.79 ---------------------5 8 10.16 7.62 12.25 7.00 2.96 ---------------------5 8 10.16 7.62 13.38 6.09 5.00 ---------------------8 6 10.16 7.62 10.92 5.84 2.79 ---------------------8 6 10.16 7.62 10.92 5.84 2.79 ---------------------8 6 10.16 7.62 12.25 7.00 2.96 ---------------------8 6 10.16 7.62 12.25 7.00 2.96 ---------------------8 6 10.16 7.62 13.38 6.09 5.00 -------------------------4 8 10.16 7.62 13.21 8.13 2.79 -----------------------5 8 10.16 7.62 13.21 8.13 2.79 --------------------8 6 10.16 7.62 13.21 8.13 2.79 --------------------8 6 10.16 7.62 13.21 8.13 2.79 -----------------------4 8 10.16 7.62 11.11 6.10 2.72 -----------------------5 8 10.16 7.62 11.11 6.10 2.72 -----------------------8 6 10.16 7.62 11.11 6.10 2.72 -----------------------8 6 10.16 7.62 11.11 6.10 2.72 --- PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-0807 87914-0818 87914-0108 87914-0811 87914-0821 87914-0831 87914-0812 87914-0822 87914-0832 E 87914-0813 87914-0823 87914-0833 87914-0814 87914-0824 87914-0834 87914-0815 87914-0825 87914-0835 87914-0816 D 87914-0819 87914-0826 87914-0828 87914-0836 87914-0801 87914-0802 87914-0803 87914-0809 87914-0804 87914-0805 87914-0806 C 87914-0810 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 6 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------8 1 10.16 7.62 13.51 8.75 2.47 ------------------8 2 10.16 7.62 13.51 8.75 2.47 ------------------8 3 10.16 7.62 13.51 8.75 2.47 ------------------4 8 10.16 7.62 13.51 8.75 2.47 ------------------5 8 10.16 7.62 13.51 8.75 2.47 ------------------8 6 10.16 7.62 26.70 20.76 3.65 ------------------4 8 10.16 7.62 14.34 9.05 3.00 ------------------8 6 10.16 7.62 11.94 6.75 2.90 ------------------8 6 10.16 7.62 13.51 8.75 2.47 ------------------8 6 10.16 7.62 25.90 19.81 3.80 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-0841 87914-0842 87914-0843 87914-0844 87914-0845 87914-0847 ------87914-0876 87914-0005 E 87914-0851 ------------------------------------87914-0848 ------------------- ------------------------------------------------------------- F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 7 OF 45 1 A 10 9 7 8 PART NO. FOR PART NO. FOR TAPE & REEL WITH CAP PACKAGING PACKAGING --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-0001 87914-1011 87914-1021 87914-1031 87914-1012 87914-1022 87914-1032 87914-1013 87914-1023 E 87914-1033 87914-1014 87914-1024 87914-1034 87914-1015 87914-1025 87914-1035 87914-1016 87914-1018 87914-1026 D 87914-1027 87914-1036 ------87914-1001 87914-1002 87914-1003 87914-1007 87914-1004 87914-1005 87914-1006 87914-1008 C ----------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 5 4 PART NO. CKT VOID PLATING FOR BULK SIZE POSITION TYPE PACKAGING DIMENSION 6 ------------------------------------------------------------------------------------------------------------------------------87914-1037 --------------------------------------------------------87914-0310 87914-0311 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 ------------------------------------------------------------------------------------------------------------------------------9 4 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 6 6 4 ----------------------------------------- ----------------------------------------- 8 9 6 6 3 A B F M P 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 10.16 12.07 10.92 12.25 13.38 10.92 12.25 13.38 10.92 12.25 13.38 10.92 12.25 13.38 10.92 12.25 13.38 10.92 10.92 12.25 12.25 13.38 10.92 13.21 13.21 13.21 13.21 13.21 13.21 13.21 13.21 11.34 11.34 5.97 5.84 7.00 6.09 5.84 7.00 6.09 5.84 7.00 6.09 5.84 7.00 6.09 5.84 7.00 6.09 5.84 5.84 7.00 7.00 6.09 5.84 8.13 8.13 8.13 8.13 6.10 6.10 6.10 6.10 6.00 6.00 3.81 2.79 2.96 5.00 2.79 2.96 5.00 2.79 2.96 5.00 2.79 2.96 5.00 2.79 2.96 5.00 2.79 2.79 2.96 2.96 5.00 2.79 2.79 2.79 2.79 2.79 2.72 2.72 2.72 2.72 3.05 3.05 2 1 G F ------------------------------------------------------------------------------------D25 --- E D C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 8 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------12 1 15.24 12.70 10.92 5.84 2.79 ------------------12 9 15.24 12.70 10.92 5.84 2.79 ------------------12 1 15.24 12.70 12.25 7.00 2.96 ------------------12 1 15.24 12.70 13.38 6.09 5.00 ------------------12 2 15.24 12.70 10.92 5.84 2.79 ------------------12 2 15.24 12.70 12.25 7.00 2.96 ------------------12 2 15.24 12.70 13.38 6.09 5.00 ------------------12 3 15.24 12.70 10.92 5.84 2.79 ------------------12 3 15.24 12.70 12.25 7.00 2.96 ------------------12 3 15.24 12.70 13.38 6.09 5.00 ------------------4 12 15.24 12.70 10.92 5.84 2.79 ------------------4 12 15.24 12.70 12.25 7.00 2.96 ------------------4 12 15.24 12.70 13.38 6.09 5.00 ------------------5 12 15.24 12.70 10.92 5.84 2.79 ------------------5 12 15.24 12.70 12.25 7.00 2.96 ------------------5 12 15.24 12.70 13.38 6.09 5.00 ------------------12 6 15.24 12.70 10.92 5.84 2.79 ------------------12 6 15.24 12.70 10.92 5.84 2.79 ------------------12 6 15.24 12.70 12.25 7.00 2.96 ------------------12 6 15.24 12.70 12.25 7.00 2.96 ------------------12 6 15.24 12.70 13.38 6.09 5.00 ------------------5 12 15.24 12.70 29.26 23.32 3.65 ------------------5 12 15.24 12.70 29.26 23.32 3.65 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-1211 ------87914-1221 87914-1231 87914-1212 87914-1222 87914-1232 87914-1213 87914-1223 E 87914-1233 87914-1214 87914-1224 87914-1234 87914-1215 87914-1225 87914-1235 87914-1216 87914-1218 87914-1226 D 87914-1228 87914-1236 87914-1246 87914-1247 ------87914-1291 ------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 9 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------12 1 15.24 12.70 18.40 13.08 3.03 ------------------12 2 15.24 12.70 18.40 13.08 3.03 ------------------12 3 15.24 12.70 18.40 13.08 3.03 ------------------4 12 15.24 12.70 18.40 13.08 3.03 ------------------5 12 15.24 12.70 18.40 13.08 3.03 ------------------12 6 15.24 12.70 18.40 13.08 3.03 ------------------12 1 15.24 12.70 12.50 6.95 3.26 ------------------12 2 15.24 12.70 12.50 6.95 3.26 ------------------12 3 15.24 12.70 12.50 6.95 3.26 ------------------4 12 15.24 12.70 12.50 6.95 3.26 ------------------5 12 15.24 12.70 12.50 6.95 3.26 ------------------4 12 15.24 12.70 13.21 8.13 2.79 ------------------5 12 15.24 12.70 13.21 8.13 2.79 ------------------12 6 15.24 12.70 13.21 8.13 2.79 ------------------4 12 15.24 12.70 11.11 6.10 2.72 ------------------5 12 15.24 12.70 11.11 6.10 2.72 ------------------12 6 15.24 12.70 11.11 6.10 2.72 ------------------12 6 15.24 12.70 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-1251 87914-1252 87914-1253 87914-1254 87914-1255 87914-1256 87914-1241 87914-1242 87914-1243 E 87914-1244 87914-1245 87914-1201 87914-1202 87914-1203 87914-1204 87914-1205 87914-1206 87914-1207 ------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------- F E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 10 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------14 1 17.78 15.24 10.92 5.84 2.79 ------------------14 1 17.78 15.24 12.25 7.00 2.96 ------------------14 1 17.78 15.24 13.38 6.09 5.00 ------------------14 2 17.78 15.24 10.92 5.84 2.79 ------------------14 2 17.78 15.24 12.25 7.00 2.96 ------------------14 2 17.78 15.24 13.38 6.09 5.00 ------------------14 3 17.78 15.24 10.92 5.84 2.79 ------------------14 3 17.78 15.24 12.25 7.00 2.96 ------------------14 3 17.78 15.24 13.38 6.09 5.00 ------------------4 14 17.78 15.24 10.92 5.84 2.79 ------------------4 14 17.78 15.24 12.25 7.00 2.96 ------------------4 14 17.78 15.24 13.38 6.09 5.00 ------------------5 14 17.78 15.24 10.92 5.84 2.79 ------------------5 14 17.78 15.24 12.25 7.00 2.96 ------------------5 14 17.78 15.24 13.38 6.09 5.00 ------------------14 6 17.78 15.24 10.92 5.84 2.79 ------------------14 6 17.78 15.24 10.92 5.84 2.79 ------------------14 6 17.78 15.24 12.25 7.00 2.96 ------------------14 6 17.78 15.24 12.25 7.00 2.96 ------------------14 6 17.78 15.24 13.38 6.09 5.00 ------------------4 14 17.78 15.24 13.21 8.13 2.79 ------------------5 14 17.78 15.24 13.21 8.13 2.79 ------------------14 6 17.78 15.24 13.21 8.13 2.79 ------------------4 14 17.78 15.24 11.11 6.10 2.72 ------------------5 14 17.78 15.24 11.11 6.10 2.72 ------------------14 6 17.78 15.24 11.11 6.10 2.72 ------------------14 6 17.78 15.24 11.11 6.10 2.72 ------------------5 14 17.78 15.24 13.42 8.08 3.05 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-1411 87914-1421 87914-1431 87914-1412 87914-1422 87914-1432 87914-1413 87914-1423 87914-1433 E 87914-1414 87914-1424 87914-1434 87914-1415 87914-1425 87914-1435 87914-1416 87914-1417 87914-1426 87914-1427 D 87914-1436 87914-1401 87914-1402 87914-1403 87914-1404 87914-1405 87914-1406 87914-1407 87914-0007 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 11 OF 45 1 A 10 9 7 8 PART NO. FOR PART NO. FOR TAPE & REEL CKT VOID WITH CAP SIZE POSITION PACKAGING PACKAGING ------------------14 ------------------14 ------------------14 ------------------14 ------------------14 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 5 6 87914-1441 87914-1442 87914-1443 87914-1444 87914-1445 ------------------------------- ------------------------------- ------- 87914-1446 ------- ------- ------- 14 ------- ------- ------- ------- ------- 87914-1447 14 ------- KINK POSITION PLATING TYPE ------------------------------CKT 1, 2, 13 & 14 ------- 4 3 2 1 DIMENSION A B F M P G 1 2 3 4 5 17.78 17.78 17.78 17.78 17.78 15.24 15.24 15.24 15.24 15.24 13.42 13.42 13.42 13.42 13.42 8.08 8.08 8.08 8.08 8.08 3.05 3.05 3.05 3.05 3.05 ----------- 6 17.78 15.24 14.58 9.11 3.18 --- 6 17.78 15.24 13.79 8.20 3.30 14.79 F E E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 12 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------16 1 20.32 17.78 10.92 5.84 2.79 ------------------16 1 20.32 17.78 12.25 7.00 2.96 ------------------16 1 20.32 17.78 13.38 6.09 5.00 ------------------16 2 20.32 17.78 10.92 5.84 2.79 ------------------16 2 20.32 17.78 12.25 7.00 2.96 ------------------16 2 20.32 17.78 13.38 6.09 5.00 ------------------16 3 20.32 17.78 10.92 5.84 2.79 ------------------16 3 20.32 17.78 12.25 7.00 2.96 ------------------16 3 20.32 17.78 13.38 6.09 5.00 ------------------4 16 20.32 17.78 10.92 5.84 2.79 ------------------4 16 20.32 17.78 12.25 7.00 2.96 ------------------4 16 20.32 17.78 13.38 6.09 5.00 ------------------5 16 20.32 17.78 10.92 5.84 2.79 ------------------5 16 20.32 17.78 12.25 7.00 2.96 ------------------5 16 20.32 17.78 13.38 6.09 5.00 ------------------16 6 20.32 17.78 10.92 5.84 2.79 ------------------16 6 20.32 17.78 10.92 5.84 2.79 ------------------16 6 20.32 17.78 12.25 7.00 2.96 ------------------16 6 20.32 17.78 12.25 7.00 2.96 ------------------16 6 20.32 17.78 13.38 6.09 5.00 ------------------4 16 20.32 17.78 13.21 8.13 2.79 ------------------5 16 20.32 17.78 13.21 8.13 2.79 ------------------16 6 20.32 17.78 13.21 8.13 2.79 ------------------4 16 20.32 17.78 11.11 6.10 2.72 ------------------5 16 20.32 17.78 11.11 6.10 2.72 ------------------16 6 20.32 17.78 11.11 6.10 2.72 ------------------16 6 20.32 17.78 11.11 6.10 2.72 ------------------5 16 20.32 17.78 12.49 7.40 2.80 ------------------5 16 20.32 17.78 9.49 4.50. 2.70 ------------------5 16 20.32 17.78 9.49 4.50. 2.70 ------------------5 16 20.32 17.78 15.79 10.45 3.05 ------------------5 16 20.32 17.78 25.90 19.81 3.80 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-1611 87914-1621 87914-1631 87914-1612 87914-1622 87914-1632 87914-1613 87914-1623 87914-1633 E 87914-1614 87914-1624 87914-1634 87914-1615 87914-1625 87914-1635 87914-1616 87914-1617 87914-1626 87914-1627 D 87914-1636 87914-1601 87914-1602 87914-1603 87914-1604 87914-1605 87914-1606 87914-1608 87914-1650 87914-1600 87914-1607 C 87914-1637 87914-1652 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 13 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P G PACKAGING PACKAGING ------------------18 1 22.86 20.32 10.92 5.84 2.79 ---------------------18 1 22.86 20.32 12.25 7.00 2.96 ---------------------18 1 22.86 20.32 13.38 6.09 5.00 ---------------------18 2 22.86 20.32 10.92 5.84 2.79 ---------------------18 2 22.86 20.32 12.25 7.00 2.96 ---------------------18 2 22.86 20.32 13.38 6.09 5.00 ---------------------18 3 22.86 20.32 10.92 5.84 2.79 ---------------------18 3 22.86 20.32 12.25 7.00 2.96 ---------------------18 3 22.86 20.32 13.38 6.09 5.00 ---------------------4 18 22.86 20.32 10.92 5.84 2.79 ---------------------4 18 22.86 20.32 12.25 7.00 2.96 ---------------------4 18 22.86 20.32 13.38 6.09 5.00 ---------------------5 18 22.86 20.32 10.92 5.84 2.79 ---------------------5 18 22.86 20.32 12.25 7.00 2.96 ---------------------5 18 22.86 20.32 13.38 6.09 5.00 ---------------------18 6 22.86 20.32 10.92 5.84 2.79 ---------------------18 6 22.86 20.32 10.92 5.84 2.79 ---------------------18 6 22.86 20.32 12.25 7.00 2.96 ---------------------18 6 22.86 20.32 12.25 7.00 2.96 ---------------------18 6 22.86 20.32 13.38 6.09 5.00 ---------------------4 18 22.86 20.32 13.21 8.13 2.79 --------------------5 18 22.86 20.32 13.21 8.13 2.79 --------------------18 6 22.86 20.32 13.21 8.13 2.79 --------------------4 18 22.86 20.32 11.11 6.10 2.72 --------------------5 18 22.86 20.32 11.11 6.10 2.72 --------------------18 6 22.86 20.32 11.11 6.10 2.72 --------------------18 6 22.86 20.32 11.11 6.10 2.72 --------------------5 18 22.86 20.32 17.02 11.05 3.68 18.02 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-1811 87914-1821 87914-1831 87914-1812 87914-1822 87914-1832 87914-1813 87914-1823 87914-1833 E 87914-1814 87914-1824 87914-1834 87914-1815 87914-1825 87914-1835 87914-1816 87914-1817 87914-1826 87914-1827 D 87914-1836 87914-1801 87914-1802 87914-1803 87914-1804 87914-1805 87914-1806 87914-1809 ------- -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------87914-1807 F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 14 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------20 1 25.40 22.86 10.92 5.84 2.79 ------------------20 1 25.40 22.86 12.25 7.00 2.96 ------------------20 1 25.40 22.86 13.38 6.09 5.00 ------------------20 2 25.40 22.86 10.92 5.84 2.79 ------------------20 2 25.40 22.86 12.25 7.00 2.96 ------------------20 2 25.40 22.86 13.38 6.09 5.00 ------------------20 3 25.40 22.86 10.92 5.84 2.79 ------------------20 3 25.40 22.86 12.25 7.00 2.96 ------------------20 3 25.40 22.86 13.38 6.09 5.00 ------------------4 20 25.40 22.86 10.92 5.84 2.79 ------------------4 20 25.40 22.86 12.25 7.00 2.96 ------------------4 20 25.40 22.86 13.38 6.09 5.00 ------------------5 20 25.40 22.86 10.92 5.84 2.79 ------------------5 20 25.40 22.86 12.25 7.00 2.96 ------------------5 20 25.40 22.86 13.38 6.09 5.00 ------------------20 6 25.40 22.86 10.92 5.84 2.79 ------------------20 6 25.40 22.86 10.92 5.84 2.79 ------------------20 6 25.40 22.86 12.25 7.00 2.96 ------------------20 6 25.40 22.86 12.25 7.00 2.96 ------------------20 6 25.40 22.86 13.38 6.09 5.00 ------------------20 6 25.40 22.86 13.38 6.09 5.00 ------------------4 20 25.40 22.86 13.21 8.13 2.79 ------------------5 20 25.40 22.86 13.21 8.13 2.79 ------------------20 6 25.40 22.86 13.21 8.13 2.79 ------------------4 20 25.40 22.86 11.11 6.10 2.72 ------------------5 20 25.40 22.86 11.11 6.10 2.72 ------------------20 6 25.40 22.86 11.11 6.10 2.72 ------------------20 6 25.40 22.86 11.11 6.10 2.72 ------------------20 6 25.40 22.86 18.29 13.00 3.00 ------------------5 20 25.40 22.86 18.84 13.46 3.09 ------------------5 20 25.40 22.86 18.84 13.46 3.09 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-2011 87914-2021 87914-2031 87914-2012 87914-2022 87914-2032 87914-2013 87914-2023 87914-2033 E 87914-2014 87914-2024 87914-2034 87914-2015 87914-2025 87914-2035 87914-2016 87914-2017 87914-2026 87914-2027 D 87914-2036 87914-2037 87914-2001 87914-2002 87914-2003 87914-2004 87914-2005 87914-2006 87914-2008 87914-2051 87914-0201 C 87914-0202 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 15 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------22 1 27.94 25.40 10.92 5.84 2.79 ------------------22 1 27.94 25.40 12.25 7.00 2.96 ------------------22 1 27.94 25.40 13.38 6.09 5.00 ------------------22 2 27.94 25.40 10.92 5.84 2.79 ------------------22 2 27.94 25.40 12.25 7.00 2.96 ------------------22 2 27.94 25.40 13.38 6.09 5.00 ------------------22 3 27.94 25.40 10.92 5.84 2.79 ------------------22 3 27.94 25.40 12.25 7.00 2.96 ------------------22 3 27.94 25.40 13.38 6.09 5.00 ------------------4 22 27.94 25.40 10.92 5.84 2.79 ------------------4 22 27.94 25.40 12.25 7.00 2.96 ------------------4 22 27.94 25.40 13.38 6.09 5.00 ------------------5 22 27.94 25.40 10.92 5.84 2.79 ------------------5 22 27.94 25.40 12.25 7.00 2.96 ------------------5 22 27.94 25.40 13.38 6.09 5.00 ------------------22 6 27.94 25.40 10.92 5.84 2.79 ------------------22 6 27.94 25.40 10.92 5.84 2.79 ------------------22 6 27.94 25.40 12.25 7.00 2.96 ------------------22 6 27.94 25.40 12.25 7.00 2.96 ------------------22 6 27.94 25.40 13.38 6.09 5.00 ------------------4 22 27.94 25.40 13.21 8.13 2.79 ------------------5 22 27.94 25.40 13.21 8.13 2.79 ------------------22 6 27.94 25.40 13.21 8.13 2.79 ------------------4 22 27.94 25.40 11.11 6.10 2.72 ------------------5 22 27.94 25.40 11.11 6.10 2.72 ------------------22 6 27.94 25.40 11.11 6.10 2.72 ------------------22 6 27.94 25.40 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-2211 87914-2221 87914-2231 87914-2212 87914-2222 87914-2232 87914-2213 87914-2223 87914-2233 E 87914-2214 87914-2224 87914-2234 87914-2215 87914-2225 87914-2235 87914-2216 87914-2217 87914-2226 87914-2227 87914-2236 D 87914-2201 87914-2202 87914-2203 87914-2204 87914-2205 87914-2206 87914-2207 ------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 16 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------24 1 30.48 27.94 10.92 5.84 2.79 ------------------24 1 30.48 27.94 12.25 7.00 2.96 ------------------24 1 30.48 27.94 13.38 6.09 5.00 ------------------24 2 30.48 27.94 10.92 5.84 2.79 ------------------24 2 30.48 27.94 12.25 7.00 2.96 ------------------24 2 30.48 27.94 13.38 6.09 5.00 ------------------24 3 30.48 27.94 10.92 5.84 2.79 ------------------24 3 30.48 27.94 12.25 7.00 2.96 ------------------24 3 30.48 27.94 13.38 6.09 5.00 ------------------4 24 30.48 27.94 10.92 5.84 2.79 ------------------4 24 30.48 27.94 12.25 7.00 2.96 ------------------4 24 30.48 27.94 13.38 6.09 5.00 ------------------5 24 30.48 27.94 10.92 5.84 2.79 ------------------5 24 30.48 27.94 12.25 7.00 2.96 ------------------5 24 30.48 27.94 13.38 6.09 5.00 ------------------24 6 30.48 27.94 10.92 5.84 2.79 ------------------24 6 30.48 27.94 10.92 5.84 2.79 ------------------24 6 30.48 27.94 12.25 7.00 2.96 ------------------24 6 30.48 27.94 12.25 7.00 2.96 ------------------24 6 30.48 27.94 13.38 6.09 5.00 ------------------4 24 30.48 27.94 13.21 8.13 2.79 ------------------5 24 30.48 27.94 13.21 8.13 2.79 ------------------24 6 30.48 27.94 13.21 8.13 2.79 ------------------4 24 30.48 27.94 11.11 6.10 2.72 ------------------5 24 30.48 27.94 11.11 6.10 2.72 ------------------24 6 30.48 27.94 11.11 6.10 2.72 ------------------24 6 30.48 27.94 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-2411 87914-2421 87914-2431 87914-2412 87914-2422 87914-2432 87914-2413 87914-2423 87914-2433 E 87914-2414 87914-2424 87914-2434 87914-2415 87914-2425 87914-2435 87914-2416 87914-2417 87914-2426 87914-2427 D 87914-2436 87914-2401 87914-2402 87914-2403 87914-2404 87914-2405 87914-2406 87914-2407 ------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 17 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------26 1 33.02 30.48 10.92 5.84 2.79 ------------------26 1 33.02 30.48 12.25 7.00 2.96 ------------------26 1 33.02 30.48 13.38 6.09 5.00 ------------------26 2 33.02 30.48 10.92 5.84 2.79 ------------------26 2 33.02 30.48 12.25 7.00 2.96 ------------------26 2 33.02 30.48 13.38 6.09 5.00 ------------------26 3 33.02 30.48 10.92 5.84 2.79 ------------------26 3 33.02 30.48 12.25 7.00 2.96 ------------------26 3 33.02 30.48 13.38 6.09 5.00 ------------------4 26 33.02 30.48 10.92 5.84 2.79 ------------------4 26 33.02 30.48 12.25 7.00 2.96 ------------------4 26 33.02 30.48 13.38 6.09 5.00 ------------------5 26 33.02 30.48 10.92 5.84 2.79 ------------------5 26 33.02 30.48 12.25 7.00 2.96 ------------------5 26 33.02 30.48 13.38 6.09 5.00 ------------------26 6 33.02 30.48 10.92 5.84 2.79 ------------------26 6 33.02 30.48 10.92 5.84 2.79 ------------------26 6 33.02 30.48 12.25 7.00 2.96 ------------------26 6 33.02 30.48 12.25 7.00 2.96 ------------------26 6 33.02 30.48 13.38 6.09 5.00 ------------------4 26 33.02 30.48 13.21 8.13 2.79 ------------------5 26 33.02 30.48 13.21 8.13 2.79 ------------------26 6 33.02 30.48 13.21 8.13 2.79 ------------------4 26 33.02 30.48 11.11 6.10 2.72 ------------------5 26 33.02 30.48 11.11 6.10 2.72 ------------------26 6 33.02 30.48 11.11 6.10 2.72 ------------------26 6 33.02 30.48 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-2611 87914-2621 87914-2631 87914-2612 87914-2622 87914-2632 87914-2613 87914-2623 87914-2633 E 87914-2614 87914-2624 87914-2634 87914-2615 87914-2625 87914-2635 87914-2616 87914-2617 87914-2626 87914-2627 D 87914-2636 87914-2601 87914-2602 87914-2603 87914-2604 87914-2605 87914-2606 87914-2607 ------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 18 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------28 1 35.56 33.02 10.92 5.84 2.79 ------------------28 1 35.56 33.02 12.25 7.00 2.96 ------------------28 1 35.56 33.02 13.38 6.09 5.00 ------------------28 2 35.56 33.02 10.92 5.84 2.79 ------------------28 2 35.56 33.02 12.25 7.00 2.96 ------------------28 2 35.56 33.02 13.38 6.09 5.00 ------------------28 3 35.56 33.02 10.92 5.84 2.79 ------------------28 3 35.56 33.02 12.25 7.00 2.96 ------------------28 3 35.56 33.02 13.38 6.09 5.00 ------------------4 28 35.56 33.02 10.92 5.84 2.79 ------------------4 28 35.56 33.02 12.25 7.00 2.96 ------------------4 28 35.56 33.02 13.38 6.09 5.00 ------------------5 28 35.56 33.02 10.92 5.84 2.79 ------------------5 28 35.56 33.02 12.25 7.00 2.96 ------------------5 28 35.56 33.02 13.38 6.09 5.00 ------------------28 6 35.56 33.02 10.92 5.84 2.79 ------------------28 6 35.56 33.02 10.92 5.84 2.79 ------------------28 6 35.56 33.02 12.25 7.00 2.96 ------------------28 6 35.56 33.02 12.25 7.00 2.96 ------------------28 6 35.56 33.02 13.38 6.09 5.00 ------------------4 28 35.56 33.02 13.21 8.13 2.79 ------------------5 28 35.56 33.02 13.21 8.13 2.79 ------------------28 6 35.56 33.02 13.21 8.13 2.79 ------------------4 28 35.56 33.02 11.11 6.10 2.72 ------------------5 28 35.56 33.02 11.11 6.10 2.72 ------------------28 6 35.56 33.02 11.11 6.10 2.72 ------------------28 6 35.56 33.02 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-2811 87914-2821 87914-2831 87914-2812 87914-2822 87914-2832 87914-2813 87914-2823 87914-2833 E 87914-2814 87914-2824 87914-2834 87914-2815 87914-2825 87914-2835 87914-2816 87914-2817 87914-2826 87914-2827 D 87914-2836 87914-2801 87914-2802 87914-2803 87914-2804 87914-2805 87914-2806 87914-2807 ------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 19 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P G PACKAGING PACKAGING ------------------30 1 38.10 35.56 10.92 5.84 2.79 --------------------30 1 38.10 35.56 12.25 7.00 2.96 --------------------30 1 38.10 35.56 13.38 6.09 5.00 --------------------30 2 38.10 35.56 10.92 5.84 2.79 --------------------30 2 38.10 35.56 12.25 7.00 2.96 --------------------30 2 38.10 35.56 13.38 6.09 5.00 --------------------30 3 38.10 35.56 10.92 5.84 2.79 --------------------30 3 38.10 35.56 12.25 7.00 2.96 --------------------30 3 38.10 35.56 13.38 6.09 5.00 --------------------4 30 38.10 35.56 10.92 5.84 2.79 --------------------4 30 38.10 35.56 12.25 7.00 2.96 --------------------4 30 38.10 35.56 13.38 6.09 5.00 --------------------5 30 38.10 35.56 10.92 5.84 2.79 --------------------5 30 38.10 35.56 12.25 7.00 2.96 --------------------5 30 38.10 35.56 13.38 6.09 5.00 --------------------30 6 38.10 35.56 10.92 5.84 2.79 --------------------30 6 38.10 35.56 10.92 5.84 2.79 --------------------30 6 38.10 35.56 12.25 7.00 2.96 --------------------30 6 38.10 35.56 12.25 7.00 2.96 --------------------30 6 38.10 35.56 13.38 6.09 5.00 --------------------4 30 38.10 35.56 13.21 8.13 2.79 --------------------5 30 38.10 35.56 13.21 8.13 2.79 --------------------30 6 38.10 35.56 13.21 8.13 2.79 --------------------4 30 38.10 35.56 11.11 6.10 2.72 --------------------5 30 38.10 35.56 11.11 6.10 2.72 --------------------30 6 38.10 35.56 11.11 6.10 2.72 --------------------30 6 38.10 35.56 11.11 6.10 2.72 --------------87914-3037 30 6 38.10 35.56 15.29 10.00 3.00 16.29 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-3011 87914-3021 87914-3031 87914-3012 87914-3022 87914-3032 87914-3013 87914-3023 87914-3033 E 87914-3014 87914-3024 87914-3034 87914-3015 87914-3025 87914-3035 87914-3016 87914-3017 87914-3026 87914-3027 D 87914-3036 87914-3001 87914-3002 87914-3003 87914-3004 87914-3005 87914-3006 87914-3007 ------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 20 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------5 32 40.64 38.10 7.62 3.05 2.28 ------------------32 1 40.64 38.10 10.92 5.84 2.79 ------------------32 1 40.64 38.10 12.25 7.00 2.96 ------------------32 1 40.64 38.10 13.38 6.09 5.00 ------------------32 2 40.64 38.10 10.92 5.84 2.79 ------------------32 2 40.64 38.10 12.25 7.00 2.96 ------------------32 2 40.64 38.10 13.38 6.09 5.00 ------------------32 3 40.64 38.10 10.92 5.84 2.79 ------------------32 3 40.64 38.10 12.25 7.00 2.96 ------------------32 3 40.64 38.10 13.38 6.09 5.00 ------------------4 32 40.64 38.10 10.92 5.84 2.79 ------------------4 32 40.64 38.10 12.25 7.00 2.96 ------------------4 32 40.64 38.10 13.38 6.09 5.00 ------------------5 32 40.64 38.10 10.92 5.84 2.79 ------------------5 32 40.64 38.10 12.25 7.00 2.96 ------------------5 32 40.64 38.10 13.38 6.09 5.00 ------------------32 6 40.64 38.10 10.92 5.84 2.79 ------------------32 6 40.64 38.10 10.92 5.84 2.79 ------------------32 6 40.64 38.10 12.25 7.00 2.96 ------------------32 6 40.64 38.10 12.25 7.00 2.96 ------------------32 6 40.64 38.10 13.38 6.09 5.00 ------------------4 32 40.64 38.10 13.21 8.13 2.79 ------------------5 32 40.64 38.10 13.21 8.13 2.79 ------------------32 6 40.64 38.10 13.21 8.13 2.79 ------------------32 6 40.64 38.10 13.21 8.13 2.79 ------------------4 32 40.64 38.10 11.11 6.10 2.72 ------------------5 32 40.64 38.10 11.11 6.10 2.72 ------------------32 6 40.64 38.10 11.11 6.10 2.72 ------------------32 6 40.64 38.10 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F ------87914-0032 ------87914-3211 ------87914-3221 ------87914-3231 ------87914-3212 ------87914-3222 ------87914-3232 ------87914-3213 ------87914-3223 ------87914-3233 E ------87914-3214 ------87914-3224 ------87914-3234 ------87914-3215 ------87914-3225 ------87914-3235 ------87914-3216 ------87914-3217 ------87914-3226 ------D 87914-3227 ------87914-3236 ------87914-3201 ------87914-3202 ------87914-3203 ------87914-3207 ------87914-3204 ------87914-3205 ------87914-3206 ------87914-3208 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 21 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------34 1 43.18 40.64 10.92 5.84 2.79 ------------------34 1 43.18 40.64 12.25 7.00 2.96 ------------------34 1 43.18 40.64 13.38 6.09 5.00 ------------------34 2 43.18 40.64 10.92 5.84 2.79 ------------------34 2 43.18 40.64 12.25 7.00 2.96 ------------------34 2 43.18 40.64 13.38 6.09 5.00 ------------------34 3 43.18 40.64 10.92 5.84 2.79 ------------------34 3 43.18 40.64 12.25 7.00 2.96 ------------------34 3 43.18 40.64 13.38 6.09 5.00 ------------------4 34 43.18 40.64 10.92 5.84 2.79 ------------------4 34 43.18 40.64 12.25 7.00 2.96 ------------------4 34 43.18 40.64 13.38 6.09 5.00 ------------------5 34 43.18 40.64 10.92 5.84 2.79 ------------------5 34 43.18 40.64 12.25 7.00 2.96 ------------------5 34 43.18 40.64 13.38 6.09 5.00 ------------------34 6 43.18 40.64 10.92 5.84 2.79 ------------------34 6 43.18 40.64 10.92 5.84 2.79 ------------------34 6 43.18 40.64 12.25 7.00 2.96 ------------------34 6 43.18 40.64 12.25 7.00 2.96 ------------------34 6 43.18 40.64 13.38 6.09 5.00 ------------------4 34 43.18 40.64 13.21 8.13 2.79 ------------------5 34 43.18 40.64 13.21 8.13 2.79 ------------------34 6 43.18 40.64 13.21 8.13 2.79 ------------------4 34 43.18 40.64 11.11 6.10 2.72 ------------------5 34 43.18 40.64 11.11 6.10 2.72 ------------------34 6 43.18 40.64 11.11 6.10 2.72 ------------------34 6 43.18 40.64 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-3411 87914-3421 87914-3431 87914-3412 87914-3422 87914-3432 87914-3413 87914-3423 87914-3433 E 87914-3414 87914-3424 87914-3434 87914-3415 87914-3425 87914-3435 87914-3416 87914-3417 87914-3426 87914-3427 D 87914-3436 87914-3401 87914-3402 87914-3403 87914-3404 87914-3405 87914-3406 87914-3407 ------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 22 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------36 1 45.72 43.18 10.92 5.84 2.79 ------------------36 1 45.72 43.18 12.25 7.00 2.96 ------------------36 1 45.72 43.18 13.38 6.09 5.00 ------------------36 2 45.72 43.18 10.92 5.84 2.79 ------------------36 2 45.72 43.18 12.25 7.00 2.96 ------------------36 2 45.72 43.18 13.38 6.09 5.00 ------------------36 3 45.72 43.18 10.92 5.84 2.79 ------------------36 3 45.72 43.18 12.25 7.00 2.96 ------------------36 3 45.72 43.18 13.38 6.09 5.00 ------------------4 36 45.72 43.18 10.92 5.84 2.79 ------------------4 36 45.72 43.18 12.25 7.00 2.96 ------------------4 36 45.72 43.18 13.38 6.09 5.00 ------------------5 36 45.72 43.18 10.92 5.84 2.79 ------------------5 36 45.72 43.18 12.25 7.00 2.96 ------------------5 36 45.72 43.18 13.38 6.09 5.00 ------------------36 6 45.72 43.18 10.92 5.84 2.79 ------------------36 6 45.72 43.18 10.92 5.84 2.79 ------------------36 6 45.72 43.18 12.25 7.00 2.96 ------------------36 6 45.72 43.18 12.25 7.00 2.96 ------------------36 6 45.72 43.18 13.38 6.09 5.00 ------------------4 36 45.72 43.18 13.21 8.13 2.79 ------------------5 36 45.72 43.18 13.21 8.13 2.79 ------------------36 6 45.72 43.18 13.21 8.13 2.79 ------------------4 36 45.72 43.18 11.11 6.10 2.72 ------------------5 36 45.72 43.18 11.11 6.10 2.72 ------------------36 6 45.72 43.18 11.11 6.10 2.72 ------------------36 6 45.72 43.18 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-3611 87914-3621 87914-3631 87914-3612 87914-3622 87914-3632 87914-3613 87914-3623 87914-3633 E 87914-3614 87914-3624 87914-3634 87914-3615 87914-3625 87914-3635 87914-3616 87914-3617 87914-3626 87914-3627 D 87914-3636 87914-3601 87914-3602 87914-3603 87914-3604 87914-3605 87914-3606 87914-3607 ------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 23 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------38 1 48.26 45.72 10.92 5.84 2.79 ------------------38 1 48.26 45.72 12.25 7.00 2.96 ------------------38 1 48.26 45.72 13.38 6.09 5.00 ------------------38 2 48.26 45.72 10.92 5.84 2.79 ------------------38 2 48.26 45.72 12.25 7.00 2.96 ------------------38 2 48.26 45.72 13.38 6.09 5.00 ------------------38 3 48.26 45.72 10.92 5.84 2.79 ------------------38 3 48.26 45.72 12.25 7.00 2.96 ------------------38 3 48.26 45.72 13.38 6.09 5.00 ------------------4 38 48.26 45.72 10.92 5.84 2.79 ------------------4 38 48.26 45.72 12.25 7.00 2.96 ------------------4 38 48.26 45.72 13.38 6.09 5.00 ------------------5 38 48.26 45.72 10.92 5.84 2.79 ------------------5 38 48.26 45.72 12.25 7.00 2.96 ------------------5 38 48.26 45.72 13.38 6.09 5.00 ------------------38 6 48.26 45.72 10.92 5.84 2.79 ------------------38 6 48.26 45.72 10.92 5.84 2.79 ------------------38 6 48.26 45.72 12.25 7.00 2.96 ------------------38 6 48.26 45.72 12.25 7.00 2.96 ------------------38 6 48.26 45.72 13.38 6.09 5.00 ------------------4 38 48.26 45.72 13.21 8.13 2.79 ------------------5 38 48.26 45.72 13.21 8.13 2.79 ------------------38 6 48.26 45.72 13.21 8.13 2.79 ------------------4 38 48.26 45.72 11.11 6.10 2.72 ------------------5 38 48.26 45.72 11.11 6.10 2.72 ------------------38 6 48.26 45.72 11.11 6.10 2.72 ------------------38 6 48.26 45.72 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-3811 87914-3821 87914-3831 87914-3812 87914-3822 87914-3832 87914-3813 87914-3823 87914-3833 E 87914-3814 87914-3824 87914-3834 87914-3815 87914-3825 87914-3835 87914-3816 87914-3817 87914-3826 87914-3827 D 87914-3836 87914-3801 87914-3802 87914-3803 87914-3804 87914-3805 87914-3806 87914-3807 ------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 24 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------40 1 50.80 48.26 10.92 5.84 2.79 ------------------40 1 50.80 48.26 12.25 7.00 2.96 ------------------40 1 50.80 48.26 13.38 6.09 5.00 ------------------40 2 50.80 48.26 10.92 5.84 2.79 ------------------40 2 50.80 48.26 12.25 7.00 2.96 ------------------40 2 50.80 48.26 13.38 6.09 5.00 ------------------40 3 50.80 48.26 10.92 5.84 2.79 ------------------40 3 50.80 48.26 12.25 7.00 2.96 ------------------40 3 50.80 48.26 13.38 6.09 5.00 ------------------4 40 50.80 48.26 10.92 5.84 2.79 ------------------4 40 50.80 48.26 12.25 7.00 2.96 ------------------4 40 50.80 48.26 13.38 6.09 5.00 ------------------5 40 50.80 48.26 10.92 5.84 2.79 ------------------5 40 50.80 48.26 12.25 7.00 2.96 ------------------5 40 50.80 48.26 13.38 6.09 5.00 ------------------40 6 50.80 48.26 10.92 5.84 2.79 ------------------40 6 50.80 48.26 10.92 5.84 2.79 ------------------40 6 50.80 48.26 12.25 7.00 2.96 ------------------40 6 50.80 48.26 12.25 7.00 2.96 ------------------40 6 50.80 48.26 13.38 6.09 5.00 ------------------4 40 50.80 48.26 13.21 8.13 2.79 ------------------5 40 50.80 48.26 13.21 8.13 2.79 ------------------40 6 50.80 48.26 13.21 8.13 2.79 ------------------4 40 50.80 48.26 11.11 6.10 2.72 ------------------5 40 50.80 48.26 11.11 6.10 2.72 ------------------40 6 50.80 48.26 11.11 6.10 2.72 ------------------40 6 50.80 48.26 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-4011 87914-4021 87914-4031 87914-4012 87914-4022 87914-4032 87914-4013 87914-4023 87914-4033 E 87914-4014 87914-4024 87914-4034 87914-4015 87914-4025 87914-4035 87914-4016 87914-4017 87914-4026 87914-4027 D 87914-4036 87914-4001 87914-4002 87914-4003 87914-4004 87914-4005 87914-4006 87914-4007 ------------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 25 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------42 1 53.34 50.80 10.92 5.84 2.79 ------------------42 1 53.34 50.80 12.25 7.00 2.96 ------------------42 2 53.34 50.80 10.92 5.84 2.79 ------------------42 2 53.34 50.80 12.25 7.00 2.96 ------------------42 3 53.34 50.80 10.92 5.84 2.79 ------------------42 3 53.34 50.80 12.25 7.00 2.96 ------------------4 42 53.34 50.80 10.92 5.84 2.79 ------------------4 42 53.34 50.80 12.25 7.00 2.96 ------------------5 42 53.34 50.80 10.92 5.84 2.79 ------------------5 42 53.34 50.80 12.25 7.00 2.96 ------------------42 6 53.34 50.80 10.92 5.84 2.79 ------------------42 6 53.34 50.80 10.92 5.84 2.79 ------------------42 6 53.34 50.80 12.25 7.00 2.96 ------------------42 6 53.34 50.80 12.25 7.00 2.96 ------------------4 42 53.34 50.80 13.21 8.13 2.79 ------------------5 42 53.34 50.80 13.21 8.13 2.79 ------------------42 6 53.34 50.80 13.21 8.13 2.79 ------------------4 42 53.34 50.80 11.11 6.10 2.72 ------------------5 42 53.34 50.80 11.11 6.10 2.72 ------------------42 6 53.34 50.80 11.11 6.10 2.72 ------------------42 6 53.34 50.80 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-4211 87914-4221 87914-4212 87914-4222 87914-4213 87914-4223 87914-4214 87914-4224 87914-4215 E 87914-4225 87914-4216 87914-4217 87914-4226 87914-4227 87914-4201 87914-4202 87914-4203 87914-4204 87914-4205 D 87914-4206 87914-4207 ------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 26 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------44 ------1 55.88 53.34 10.92 5.84 2.79 ------------44 ------1 55.88 53.34 12.25 7.00 2.96 ------------44 ------2 55.88 53.34 10.92 5.84 2.79 ------------44 ------2 55.88 53.34 12.25 7.00 2.96 ------------44 ------3 55.88 53.34 10.92 5.84 2.79 ------------44 ------3 55.88 53.34 12.25 7.00 2.96 ------------44 ------4 55.88 53.34 10.92 5.84 2.79 ------------44 ------4 55.88 53.34 12.25 7.00 2.96 ------------44 ------5 55.88 53.34 10.92 5.84 2.79 ------------44 ------5 55.88 53.34 12.25 7.00 2.96 ------------44 ------6 55.88 53.34 10.92 5.84 2.79 ------------44 ------6 55.88 53.34 10.92 5.84 2.79 ------------44 ------6 55.88 53.34 12.25 7.00 2.96 ------------44 ------6 55.88 53.34 12.25 7.00 2.96 ------------44 ------4 55.88 53.34 13.21 8.13 2.79 ------------44 ------5 55.88 53.34 13.21 8.13 2.79 ------------44 ------6 55.88 53.34 13.21 8.13 2.79 ------------44 ------4 55.88 53.34 11.11 6.10 2.72 ------------44 ------5 55.88 53.34 11.11 6.10 2.72 ------------44 ------6 55.88 53.34 11.11 6.10 2.72 ------------44 ------6 55.88 53.34 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-4411 87914-4421 87914-4412 87914-4422 87914-4413 87914-4423 87914-4414 87914-4424 87914-4415 E 87914-4425 87914-4416 87914-4417 87914-4426 87914-4427 87914-4401 87914-4402 87914-4403 87914-4404 87914-4405 D 87914-4406 87914-4407 ------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 27 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------46 1 58.42 55.88 10.92 5.84 2.79 ------------------46 1 58.42 55.88 12.25 7.00 2.96 ------------------46 2 58.42 55.88 10.92 5.84 2.79 ------------------46 2 58.42 55.88 12.25 7.00 2.96 ------------------46 3 58.42 55.88 10.92 5.84 2.79 ------------------46 3 58.42 55.88 12.25 7.00 2.96 ------------------4 46 58.42 55.88 10.92 5.84 2.79 ------------------4 46 58.42 55.88 12.25 7.00 2.96 ------------------5 46 58.42 55.88 10.92 5.84 2.79 ------------------5 46 58.42 55.88 12.25 7.00 2.96 ------------------46 6 58.42 55.88 10.92 5.84 2.79 ------------------46 6 58.42 55.88 10.92 5.84 2.79 ------------------46 6 58.42 55.88 12.25 7.00 2.96 ------------------46 6 58.42 55.88 12.25 7.00 2.96 ------------------4 46 58.42 55.88 13.21 8.13 2.79 ------------------5 46 58.42 55.88 13.21 8.13 2.79 ------------------46 6 58.42 55.88 13.21 8.13 2.79 ------------------4 46 58.42 55.88 11.11 6.10 2.72 ------------------5 46 58.42 55.88 11.11 6.10 2.72 ------------------46 6 58.42 55.88 11.11 6.10 2.72 ------------------46 6 58.42 55.88 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-4611 87914-4621 87914-4612 87914-4622 87914-4613 87914-4623 87914-4614 87914-4624 87914-4615 E 87914-4625 87914-4616 87914-4617 87914-4626 87914-4627 87914-4601 87914-4602 87914-4603 87914-4604 87914-4605 D 87914-4606 87914-4607 ------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 28 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------48 1 60.96 58.42 10.92 5.84 2.79 ------------------48 1 60.96 58.42 12.25 7.00 2.96 ------------------48 2 60.96 58.42 10.92 5.84 2.79 ------------------48 2 60.96 58.42 12.25 7.00 2.96 ------------------48 3 60.96 58.42 10.92 5.84 2.79 ------------------48 3 60.96 58.42 12.25 7.00 2.96 ------------------4 48 60.96 58.42 10.92 5.84 2.79 ------------------4 48 60.96 58.42 12.25 7.00 2.96 ------------------5 48 60.96 58.42 10.92 5.84 2.79 ------------------5 48 60.96 58.42 12.25 7.00 2.96 ------------------48 6 60.96 58.42 10.92 5.84 2.79 ------------------48 6 60.96 58.42 10.92 5.84 2.79 ------------------48 6 60.96 58.42 12.25 7.00 2.96 ------------------48 6 60.96 58.42 12.25 7.00 2.96 ------------------4 48 60.96 58.42 13.21 8.13 2.79 ------------------5 48 60.96 58.42 13.21 8.13 2.79 ------------------48 6 60.96 58.42 13.21 8.13 2.79 ------------------4 48 60.96 58.42 11.11 6.10 2.72 ------------------5 48 60.96 58.42 11.11 6.10 2.72 ------------------48 6 60.96 58.42 11.11 6.10 2.72 ------------------48 6 60.96 58.42 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-4811 87914-4821 87914-4812 87914-4822 87914-4813 87914-4823 87914-4814 87914-4824 87914-4815 E 87914-4825 87914-4816 87914-4817 87914-4826 87914-4827 87914-4801 87914-4802 87914-4803 87914-4804 87914-4805 D 87914-4806 87914-4807 ------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 29 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------50 8 63.50 60.96 18.54 11.58 4.47 ------------------50 1 63.50 60.96 10.92 5.84 2.79 ------------------50 1 63.50 60.96 12.25 7.00 2.96 ------------------50 2 63.50 60.96 10.92 5.84 2.79 ------------------50 2 63.50 60.96 12.25 7.00 2.96 ------------------50 3 63.50 60.96 10.92 5.84 2.79 ------------------50 3 63.50 60.96 12.25 7.00 2.96 ------------------4 50 63.50 60.96 10.92 5.84 2.79 ------------------4 50 63.50 60.96 12.25 7.00 2.96 ------------------5 50 63.50 60.96 10.92 5.84 2.79 ------------------5 50 63.50 60.96 12.25 7.00 2.96 ------------------50 6 63.50 60.96 10.92 5.84 2.79 ------------------50 6 63.50 60.96 10.92 5.84 2.79 ------------------50 6 63.50 60.96 12.25 7.00 2.96 ------------------50 6 63.50 60.96 12.25 7.00 2.96 ------------------4 50 63.50 60.96 13.21 8.13 2.79 ------------------5 50 63.50 60.96 13.21 8.13 2.79 ------------------50 6 63.50 60.96 13.21 8.13 2.79 ------------------4 50 63.50 60.96 11.11 6.10 2.72 ------------------5 50 63.50 60.96 11.11 6.10 2.72 ------------------50 6 63.50 60.96 11.11 6.10 2.72 ------------------50 6 63.50 60.96 11.11 6.10 2.72 PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR TRAY TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING CAP PACKAGING CAP PACKAGING F 87914-0002 87914-5011 87914-5021 87914-5012 87914-5022 87914-5013 87914-5023 87914-5014 87914-5024 E 87914-5015 87914-5025 87914-5016 87914-5017 87914-5026 87914-5027 87914-5001 87914-5002 87914-5003 87914-5004 D 87914-5005 87914-5006 87914-5007 ------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 30 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------52 1 66.04 63.50 10.92 5.84 2.79 ------------------52 1 66.04 63.50 12.25 7.00 2.96 ------------------52 2 66.04 63.50 10.92 5.84 2.79 ------------------52 2 66.04 63.50 12.25 7.00 2.96 ------------------52 3 66.04 63.50 10.92 5.84 2.79 ------------------52 3 66.04 63.50 12.25 7.00 2.96 ------------------4 52 66.04 63.50 10.92 5.84 2.79 ------------------4 52 66.04 63.50 12.25 7.00 2.96 ------------------5 52 66.04 63.50 10.92 5.84 2.79 ------------------5 52 66.04 63.50 12.25 7.00 2.96 ------------------52 6 66.04 63.50 10.92 5.84 2.79 ------------------52 6 66.04 63.50 12.25 7.00 2.96 ------------------52 6 66.04 63.50 12.25 7.00 2.96 ------------------4 52 66.04 63.50 13.21 8.13 2.79 ------------------5 52 66.04 63.50 13.21 8.13 2.79 ------------------52 6 66.04 63.50 13.21 8.13 2.79 ------------------4 52 66.04 63.50 11.11 6.10 2.72 ------------------5 52 66.04 63.50 11.11 6.10 2.72 ------------------52 6 66.04 63.50 11.11 6.10 2.72 ------------------52 6 66.04 63.50 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-5211 87914-5221 87914-5212 87914-5222 87914-5213 87914-5223 87914-5214 87914-5224 87914-5215 E 87914-5225 87914-5216 87914-5226 87914-5227 ------------------------------------------D ------------------------------------------------------------------------------87914-5201 87914-5202 87914-5203 87914-5204 87914-5205 87914-5206 87914-5207 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 31 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------54 ------1 68.58 66.04 10.92 5.84 2.79 ------------54 ------1 68.58 66.04 12.25 7.00 2.96 ------------54 ------2 68.58 66.04 10.92 5.84 2.79 ------------54 ------2 68.58 66.04 12.25 7.00 2.96 ------------54 ------3 68.58 66.04 10.92 5.84 2.79 ------------54 ------3 68.58 66.04 12.25 7.00 2.96 ------------54 ------4 68.58 66.04 10.92 5.84 2.79 ------------54 ------4 68.58 66.04 12.25 7.00 2.96 ------------54 ------5 68.58 66.04 10.92 5.84 2.79 ------------54 ------5 68.58 66.04 12.25 7.00 2.96 ------------54 ------6 68.58 66.04 10.92 5.84 2.79 ------------54 ------6 68.58 66.04 12.25 7.00 2.96 ------------54 ------6 68.58 66.04 12.25 7.00 2.96 ------------54 ------4 68.58 66.04 13.21 8.13 2.79 ------------54 ------5 68.58 66.04 13.21 8.13 2.79 ------------54 ------6 68.58 66.04 13.21 8.13 2.79 ------------54 ------4 68.58 66.04 11.11 6.10 2.72 ------------54 ------5 68.58 66.04 11.11 6.10 2.72 ------------54 ------6 68.58 66.04 11.11 6.10 2.72 ------------54 ------6 68.58 66.04 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-5411 87914-5421 87914-5412 87914-5422 87914-5413 87914-5423 87914-5414 87914-5424 87914-5415 E 87914-5425 87914-5416 87914-5426 87914-5427 ------------------------------------------D ------------------------------------------------------------------------------87914-5401 87914-5402 87914-5403 87914-5404 87914-5405 87914-5406 87914-5407 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 32 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------56 1 71.12 68.58 10.92 5.84 2.79 ------------------56 1 71.12 68.58 12.25 7.00 2.96 ------------------56 2 71.12 68.58 10.92 5.84 2.79 ------------------56 2 71.12 68.58 12.25 7.00 2.96 ------------------56 3 71.12 68.58 10.92 5.84 2.79 ------------------56 3 71.12 68.58 12.25 7.00 2.96 ------------------4 56 71.12 68.58 10.92 5.84 2.79 ------------------4 56 71.12 68.58 12.25 7.00 2.96 ------------------5 56 71.12 68.58 10.92 5.84 2.79 ------------------5 56 71.12 68.58 12.25 7.00 2.96 ------------------56 6 71.12 68.58 10.92 5.84 2.79 ------------------56 6 71.12 68.58 12.25 7.00 2.96 ------------------56 6 71.12 68.58 12.25 7.00 2.96 ------------------4 56 71.12 68.58 13.21 8.13 2.79 ------------------5 56 71.12 68.58 13.21 8.13 2.79 ------------------56 6 71.12 68.58 13.21 8.13 2.79 ------------------4 56 71.12 68.58 11.11 6.10 2.72 ------------------5 56 71.12 68.58 11.11 6.10 2.72 ------------------56 6 71.12 68.58 11.11 6.10 2.72 ------------------56 6 71.12 68.58 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-5611 87914-5621 87914-5612 87914-5622 87914-5613 87914-5623 87914-5614 87914-5624 87914-5615 E 87914-5625 87914-5616 87914-5626 87914-5627 ------------------------------------------D ------------------------------------------------------------------------------87914-5601 87914-5602 87914-5603 87914-5604 87914-5605 87914-5606 87914-5607 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 33 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------58 1 73.66 71.12 10.92 5.84 2.79 ------------------58 1 73.66 71.12 12.25 7.00 2.96 ------------------58 2 73.66 71.12 10.92 5.84 2.79 ------------------58 2 73.66 71.12 12.25 7.00 2.96 ------------------58 3 73.66 71.12 10.92 5.84 2.79 ------------------58 3 73.66 71.12 12.25 7.00 2.96 ------------------4 58 73.66 71.12 10.92 5.84 2.79 ------------------4 58 73.66 71.12 12.25 7.00 2.96 ------------------5 58 73.66 71.12 10.92 5.84 2.79 ------------------5 58 73.66 71.12 12.25 7.00 2.96 ------------------58 6 73.66 71.12 10.92 5.84 2.79 ------------------58 6 73.66 71.12 12.25 7.00 2.96 ------------------58 6 73.66 71.12 12.25 7.00 2.96 ------------------4 58 73.66 71.12 13.21 8.13 2.79 ------------------5 58 73.66 71.12 13.21 8.13 2.79 ------------------58 6 73.66 71.12 13.21 8.13 2.79 ------------------4 58 73.66 71.12 11.11 6.10 2.72 ------------------5 58 73.66 71.12 11.11 6.10 2.72 ------------------58 6 73.66 71.12 11.11 6.10 2.72 ------------------58 6 73.66 71.12 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-5811 87914-5821 87914-5812 87914-5822 87914-5813 87914-5823 87914-5814 87914-5824 87914-5815 E 87914-5825 87914-5816 87914-5826 87914-5827 ------------------------------------------D ------------------------------------------------------------------------------87914-5801 87914-5802 87914-5803 87914-5804 87914-5805 87914-5806 87914-5807 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 34 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------60 1 76.20 73.66 10.92 5.84 2.79 ------------------60 1 76.20 73.66 12.25 7.00 2.96 ------------------60 2 76.20 73.66 10.92 5.84 2.79 ------------------60 2 76.20 73.66 12.25 7.00 2.96 ------------------60 3 76.20 73.66 10.92 5.84 2.79 ------------------60 3 76.20 73.66 12.25 7.00 2.96 ------------------4 60 76.20 73.66 10.92 5.84 2.79 ------------------4 60 76.20 73.66 12.25 7.00 2.96 ------------------5 60 76.20 73.66 10.92 5.84 2.79 ------------------5 60 76.20 73.66 12.25 7.00 2.96 ------------------60 6 76.20 73.66 10.92 5.84 2.79 ------------------60 6 76.20 73.66 12.25 7.00 2.96 ------------------60 6 76.20 73.66 12.25 7.00 2.96 ------------------4 60 76.20 73.66 13.21 8.13 2.79 ------------------5 60 76.20 73.66 13.21 8.13 2.79 ------------------60 6 76.20 73.66 13.21 8.13 2.79 ------------------4 60 76.20 73.66 11.11 6.10 2.72 ------------------5 60 76.20 73.66 11.11 6.10 2.72 ------------------60 6 76.20 73.66 11.11 6.10 2.72 ------------------60 6 76.20 73.66 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-6011 87914-6021 87914-6012 87914-6022 87914-6013 87914-6023 87914-6014 87914-6024 87914-6015 E 87914-6025 87914-6016 87914-6026 87914-6027 ------------------------------------------D ------------------------------------------------------------------------------87914-6001 87914-6002 87914-6003 87914-6004 87914-6005 87914-6006 87914-6007 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 35 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------62 1 78.74 76.20 10.92 5.84 2.79 ------------------62 1 78.74 76.20 12.25 7.00 2.96 ------------------62 2 78.74 76.20 10.92 5.84 2.79 ------------------62 2 78.74 76.20 12.25 7.00 2.96 ------------------62 3 78.74 76.20 10.92 5.84 2.79 ------------------62 3 78.74 76.20 12.25 7.00 2.96 ------------------4 62 78.74 76.20 10.92 5.84 2.79 ------------------4 62 78.74 76.20 12.25 7.00 2.96 ------------------5 62 78.74 76.20 10.92 5.84 2.79 ------------------5 62 78.74 76.20 12.25 7.00 2.96 ------------------62 6 78.74 76.20 10.92 5.84 2.79 ------------------62 6 78.74 76.20 12.25 7.00 2.96 ------------------62 6 78.74 76.20 12.25 7.00 2.96 ------------------4 62 78.74 76.20 13.21 8.13 2.79 ------------------5 62 78.74 76.20 13.21 8.13 2.79 ------------------62 6 78.74 76.20 13.21 8.13 2.79 ------------------4 62 78.74 76.20 11.11 6.10 2.72 ------------------5 62 78.74 76.20 11.11 6.10 2.72 ------------------62 6 78.74 76.20 11.11 6.10 2.72 ------------------62 6 78.74 76.20 11.11 6.10 2.72 ------------------62 6 78.74 76.20 13.61 8.60 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-6211 87914-6221 87914-6212 87914-6222 87914-6213 87914-6223 87914-6214 87914-6224 87914-6215 E 87914-6225 87914-6216 87914-6226 87914-6227 ------------------------------------------D ------- ------------------------------------------------------------------------------87914-6201 87914-6202 87914-6203 87914-6204 87914-6205 87914-6206 87914-6207 ------- ------------------------------------------------------------------------------------------------------------------------87914-6258 ------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 36 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------64 1 81.28 78.74 10.92 5.84 2.79 ------------------64 1 81.28 78.74 12.25 7.00 2.96 ------------------64 2 81.28 78.74 10.92 5.84 2.79 ------------------64 2 81.28 78.74 12.25 7.00 2.96 ------------------64 3 81.28 78.74 10.92 5.84 2.79 ------------------64 3 81.28 78.74 12.25 7.00 2.96 ------------------4 64 81.28 78.74 10.92 5.84 2.79 ------------------4 64 81.28 78.74 12.25 7.00 2.96 ------------------5 64 81.28 78.74 10.92 5.84 2.79 ------------------5 64 81.28 78.74 12.25 7.00 2.96 ------------------64 6 81.28 78.74 10.92 5.84 2.79 ------------------64 6 81.28 78.74 12.25 7.00 2.96 ------------------64 6 81.28 78.74 12.25 7.00 2.96 ------------------4 64 81.28 78.74 13.21 8.13 2.79 ------------------5 64 81.28 78.74 13.21 8.13 2.79 ------------------64 6 81.28 78.74 13.21 8.13 2.79 ------------------4 64 81.28 78.74 11.11 6.10 2.72 ------------------5 64 81.28 78.74 11.11 6.10 2.72 ------------------64 6 81.28 78.74 11.11 6.10 2.72 ------------------64 6 81.28 78.74 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-6411 87914-6421 87914-6412 87914-6422 87914-6413 87914-6423 87914-6414 87914-6424 87914-6415 E 87914-6425 87914-6416 87914-6426 87914-6427 ------------------------------------------D ------------------------------------------------------------------------------87914-6401 87914-6402 87914-6403 87914-6404 87914-6405 87914-6406 87914-6407 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 37 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------66 1 83.82 81.28 10.92 5.84 2.79 ------------------66 1 83.82 81.28 12.25 7.00 2.96 ------------------66 2 83.82 81.28 10.92 5.84 2.79 ------------------66 2 83.82 81.28 12.25 7.00 2.96 ------------------66 3 83.82 81.28 10.92 5.84 2.79 ------------------66 3 83.82 81.28 12.25 7.00 2.96 ------------------4 66 83.82 81.28 10.92 5.84 2.79 ------------------4 66 83.82 81.28 12.25 7.00 2.96 ------------------5 66 83.82 81.28 10.92 5.84 2.79 ------------------5 66 83.82 81.28 12.25 7.00 2.96 ------------------66 6 83.82 81.28 10.92 5.84 2.79 ------------------66 6 83.82 81.28 12.25 7.00 2.96 ------------------66 6 83.82 81.28 12.25 7.00 2.96 ------------------4 66 83.82 81.28 13.21 8.13 2.79 ------------------5 66 83.82 81.28 13.21 8.13 2.79 ------------------66 6 83.82 81.28 13.21 8.13 2.79 ------------------4 66 83.82 81.28 11.11 6.10 2.72 ------------------5 66 83.82 81.28 11.11 6.10 2.72 ------------------66 6 83.82 81.28 11.11 6.10 2.72 ------------------66 6 83.82 81.28 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-6611 87914-6621 87914-6612 87914-6622 87914-6613 87914-6623 87914-6614 87914-6624 87914-6615 E 87914-6625 87914-6616 87914-6626 87914-6627 ------------------------------------------D ------------------------------------------------------------------------------87914-6601 87914-6602 87914-6603 87914-6604 87914-6605 87914-6606 87914-6607 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 38 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------68 1 86.36 83.82 10.92 5.84 2.79 ------------------68 1 86.36 83.82 12.25 7.00 2.96 ------------------68 2 86.36 83.82 10.92 5.84 2.79 ------------------68 2 86.36 83.82 12.25 7.00 2.96 ------------------68 3 86.36 83.82 10.92 5.84 2.79 ------------------68 3 86.36 83.82 12.25 7.00 2.96 ------------------4 68 86.36 83.82 10.92 5.84 2.79 ------------------4 68 86.36 83.82 12.25 7.00 2.96 ------------------5 68 86.36 83.82 10.92 5.84 2.79 ------------------5 68 86.36 83.82 12.25 7.00 2.96 ------------------68 6 86.36 83.82 10.92 5.84 2.79 ------------------68 6 86.36 83.82 12.25 7.00 2.96 ------------------68 6 86.36 83.82 12.25 7.00 2.96 ------------------4 68 86.36 83.82 13.21 8.13 2.79 ------------------5 68 86.36 83.82 13.21 8.13 2.79 ------------------68 6 86.36 83.82 13.21 8.13 2.79 ------------------4 68 86.36 83.82 11.11 6.10 2.72 ------------------5 68 86.36 83.82 11.11 6.10 2.72 ------------------68 6 86.36 83.82 11.11 6.10 2.72 ------------------68 6 86.36 83.82 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-6811 87914-6821 87914-6812 87914-6822 87914-6813 87914-6823 87914-6814 87914-6824 87914-6815 E 87914-6825 87914-6816 87914-6826 87914-6827 ------------------------------------------D ------------------------------------------------------------------------------87914-6801 87914-6802 87914-6803 87914-6804 87914-6805 87914-6806 87914-6807 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 39 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------70 1 88.90 86.36 10.92 5.84 2.79 ------------------70 1 88.90 86.36 12.25 7.00 2.96 ------------------70 2 88.90 86.36 10.92 5.84 2.79 ------------------70 2 88.90 86.36 12.25 7.00 2.96 ------------------70 3 88.90 86.36 10.92 5.84 2.79 ------------------70 3 88.90 86.36 12.25 7.00 2.96 ------------------4 70 88.90 86.36 10.92 5.84 2.79 ------------------4 70 88.90 86.36 12.25 7.00 2.96 ------------------5 70 88.90 86.36 10.92 5.84 2.79 ------------------5 70 88.90 86.36 12.25 7.00 2.96 ------------------70 6 88.90 86.36 10.92 5.84 2.79 ------------------70 6 88.90 86.36 12.25 7.00 2.96 ------------------70 6 88.90 86.36 12.25 7.00 2.96 ------------------4 70 88.90 86.36 13.21 8.13 2.79 ------------------5 70 88.90 86.36 13.21 8.13 2.79 ------------------70 6 88.90 86.36 13.21 8.13 2.79 ------------------4 70 88.90 86.36 11.11 6.10 2.72 ------------------5 70 88.90 86.36 11.11 6.10 2.72 ------------------70 6 88.90 86.36 11.11 6.10 2.72 ------------------70 6 88.90 86.36 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-7011 87914-7021 87914-7012 87914-7022 87914-7013 87914-7023 87914-7014 87914-7024 87914-7015 E 87914-7025 87914-7016 87914-7026 87914-7027 ------------------------------------------D ------------------------------------------------------------------------------87914-7001 87914-7002 87914-7003 87914-7004 87914-7005 87914-7006 87914-7007 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 40 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------72 1 91.44 88.90 10.92 5.84 2.79 ------------------72 1 91.44 88.90 12.25 7.00 2.96 ------------------72 2 91.44 88.90 10.92 5.84 2.79 ------------------72 2 91.44 88.90 12.25 7.00 2.96 ------------------72 3 91.44 88.90 10.92 5.84 2.79 ------------------72 3 91.44 88.90 12.25 7.00 2.96 ------------------4 72 91.44 88.90 10.92 5.84 2.79 ------------------4 72 91.44 88.90 12.25 7.00 2.96 ------------------5 72 91.44 88.90 10.92 5.84 2.79 ------------------5 72 91.44 88.90 12.25 7.00 2.96 ------------------72 6 91.44 88.90 10.92 5.84 2.79 ------------------72 6 91.44 88.90 12.25 7.00 2.96 ------------------72 6 91.44 88.90 12.25 7.00 2.96 ------------------4 72 91.44 88.90 13.21 8.13 2.79 ------------------5 72 91.44 88.90 13.21 8.13 2.79 ------------------72 6 91.44 88.90 13.21 8.13 2.79 ------------------4 72 91.44 88.90 11.11 6.10 2.72 ------------------5 72 91.44 88.90 11.11 6.10 2.72 ------------------72 6 91.44 88.90 11.11 6.10 2.72 ------------------72 6 91.44 88.90 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-7211 87914-7221 87914-7212 87914-7222 87914-7213 87914-7223 87914-7214 87914-7224 87914-7215 E 87914-7225 87914-7216 87914-7226 87914-7227 ------------------------------------------D ------------------------------------------------------------------------------87914-7201 87914-7202 87914-7203 87914-7204 87914-7205 87914-7206 87914-7207 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 41 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------74 ------1 93.98 91.44 10.92 5.84 2.79 ------------74 ------1 93.98 91.44 12.25 7.00 2.96 ------------74 ------2 93.98 91.44 10.92 5.84 2.79 ------------74 ------2 93.98 91.44 12.25 7.00 2.96 ------------74 ------3 93.98 91.44 10.92 5.84 2.79 ------------74 ------3 93.98 91.44 12.25 7.00 2.96 ------------74 ------4 93.98 91.44 10.92 5.84 2.79 ------------74 ------4 93.98 91.44 12.25 7.00 2.96 ------------74 ------5 93.98 91.44 10.92 5.84 2.79 ------------74 ------5 93.98 91.44 12.25 7.00 2.96 ------------74 ------6 93.98 91.44 10.92 5.84 2.79 ------------74 ------6 93.98 91.44 12.25 7.00 2.96 ------------74 ------6 93.98 91.44 12.25 7.00 2.96 ------------74 ------4 93.98 91.44 13.21 8.13 2.79 ------------74 ------5 93.98 91.44 13.21 8.13 2.79 ------------74 ------6 93.98 91.44 13.21 8.13 2.79 ------------74 ------4 93.98 91.44 11.11 6.10 2.72 ------------74 ------5 93.98 91.44 11.11 6.10 2.72 ------------74 ------6 93.98 91.44 11.11 6.10 2.72 ------------74 ------6 93.98 91.44 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-7411 87914-7421 87914-7412 87914-7422 87914-7413 87914-7423 87914-7414 87914-7424 87914-7415 E 87914-7425 87914-7416 87914-7426 87914-7427 ------------------------------------------D ------------------------------------------------------------------------------87914-7401 87914-7402 87914-7403 87914-7404 87914-7405 87914-7406 87914-7407 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 42 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------76 1 96.52 93.98 10.92 5.84 2.79 ------------------76 1 96.52 93.98 12.25 7.00 2.96 ------------------76 2 96.52 93.98 10.92 5.84 2.79 ------------------76 2 96.52 93.98 12.25 7.00 2.96 ------------------76 3 96.52 93.98 10.92 5.84 2.79 ------------------76 3 96.52 93.98 12.25 7.00 2.96 ------------------4 76 96.52 93.98 10.92 5.84 2.79 ------------------4 76 96.52 93.98 12.25 7.00 2.96 ------------------5 76 96.52 93.98 10.92 5.84 2.79 ------------------5 76 96.52 93.98 12.25 7.00 2.96 ------------------76 6 96.52 93.98 10.92 5.84 2.79 ------------------76 6 96.52 93.98 12.25 7.00 2.96 ------------------76 6 96.52 93.98 12.25 7.00 2.96 ------------------4 76 96.52 93.98 13.21 8.13 2.79 ------------------5 76 96.52 93.98 13.21 8.13 2.79 ------------------76 6 96.52 93.98 13.21 8.13 2.79 ------------------4 76 96.52 93.98 11.11 6.10 2.72 ------------------5 76 96.52 93.98 11.11 6.10 2.72 ------------------76 6 96.52 93.98 11.11 6.10 2.72 ------------------76 6 96.52 93.98 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-7611 87914-7621 87914-7612 87914-7622 87914-7613 87914-7623 87914-7614 87914-7624 87914-7615 E 87914-7625 87914-7616 87914-7626 87914-7627 ------------------------------------------D ------------------------------------------------------------------------------87914-7601 87914-7602 87914-7603 87914-7604 87914-7605 87914-7606 87914-7607 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 43 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------78 1 99.06 96.52 10.92 5.84 2.79 ------------------78 1 99.06 96.52 12.25 7.00 2.96 ------------------78 2 99.06 96.52 10.92 5.84 2.79 ------------------78 2 99.06 96.52 12.25 7.00 2.96 ------------------78 3 99.06 96.52 10.92 5.84 2.79 ------------------78 3 99.06 96.52 12.25 7.00 2.96 ------------------4 78 99.06 96.52 10.92 5.84 2.79 ------------------4 78 99.06 96.52 12.25 7.00 2.96 ------------------5 78 99.06 96.52 10.92 5.84 2.79 ------------------5 78 99.06 96.52 12.25 7.00 2.96 ------------------78 6 99.06 96.52 10.92 5.84 2.79 ------------------78 6 99.06 96.52 12.25 7.00 2.96 ------------------78 6 99.06 96.52 12.25 7.00 2.96 ------------------4 78 99.06 96.52 13.21 8.13 2.79 ------------------5 78 99.06 96.52 13.21 8.13 2.79 ------------------78 6 99.06 96.52 13.21 8.13 2.79 ------------------4 78 99.06 96.52 11.11 6.10 2.72 ------------------5 78 99.06 96.52 11.11 6.10 2.72 ------------------78 6 99.06 96.52 11.11 6.10 2.72 ------------------78 6 99.06 96.52 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-7811 87914-7821 87914-7812 87914-7822 87914-7813 87914-7823 87914-7814 87914-7824 87914-7815 E 87914-7825 87914-7816 87914-7826 87914-7827 ------------------------------------------D ------------------------------------------------------------------------------87914-7801 87914-7802 87914-7803 87914-7804 87914-7805 87914-7806 87914-7807 ------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 44 OF 45 1 A 10 9 7 8 6 5 4 3 2 1 PART NO. FOR PART NO. FOR DIMENSION TAPE & REEL CKT VOID PLATING WITH CAP SIZE POSITION TYPE A B F M P PACKAGING PACKAGING ------------------80 1 101.60 99.06 10.92 5.84 2.79 ------------------80 1 101.60 99.06 12.25 7.00 2.96 ------------------80 2 101.60 99.06 10.92 5.84 2.79 ------------------80 2 101.60 99.06 12.25 7.00 2.96 ------------------80 3 101.60 99.06 10.92 5.84 2.79 ------------------80 3 101.60 99.06 12.25 7.00 2.96 ------------------4 80 101.60 99.06 10.92 5.84 2.79 ------------------4 80 101.60 99.06 12.25 7.00 2.96 ------------------5 80 101.60 99.06 10.92 5.84 2.79 ------------------5 80 101.60 99.06 12.25 7.00 2.96 ------------------80 6 101.60 99.06 10.92 5.84 2.79 ------------------80 6 101.60 99.06 10.92 5.84 2.79 ------------------80 6 101.60 99.06 12.25 7.00 2.96 ------------------80 6 101.60 99.06 12.25 7.00 2.96 ------------------4 80 101.60 99.06 13.21 8.13 2.79 ------------------5 80 101.60 99.06 13.21 8.13 2.79 ------------------80 6 101.60 99.06 13.21 8.13 2.79 ------------------4 80 101.60 99.06 11.11 6.10 2.72 ------------------5 80 101.60 99.06 11.11 6.10 2.72 ------------------80 6 101.60 99.06 11.11 6.10 2.72 ------------------80 6 101.60 99.06 11.11 6.10 2.72 PART NO PART NO PART NO. FOR PART NO. FOR TAPE & REEL FOR BULK FOR BULK TUBE WITHOUT TUBE WITH WITHOUT CAP PACKAGING PACKAGING CAP PACKAGING CAP PACKAGING F 87914-8011 87914-8021 87914-8012 87914-8022 87914-8013 87914-8023 87914-8014 87914-8024 87914-8015 E 87914-8025 87914-8016 87914-8017 87914-8026 87914-8027 ------------------------------------D ------- ------------------------------------------------------------------------------------87914-8001 87914-8002 87914-8003 87914-8004 87914-8005 87914-8006 87914-8007 ------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------- F E D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± 2 PLACES ± A ± 0.2 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2023/02/15 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:07 8 ± ± 1 PLACE 7 6 5 4 2.54MM PITCH DUAL ROW HEADER SINGLE WAFER, T/H INCH ± EC NO: 738726 DRWN: DANUSA CHK'D: DANUSA APPR: MRAMAKRISHNA INITIAL REVISION: DRWN: YLQIAO APPR: SCLOW THIRD ANGLE PROJECTION 2023/02/15 2023/02/15 2023/02/15 2005/01/17 2005/01/25 DRAWING SERIES A3-SIZE 87914 3 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-87914-013 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 D25 SHEET NUMBER 45 OF 45 1 A