0885371505

10 F E D 9 MOLEX P/N Plenum LSZH, Riser 885371501 885376501 885371502 885376502 885371503 885376503 885371504 885376504 885371505 885376505 885371507 885376507 885371508 885376508 885371510 885376510 885371515 885376515 885371520 885376520 885371525 885376525 885371530 885376530 885371540 885376540 885371560 885376560 885371575 885376575 885371590 885376590 885371600 885376600 885371620 885376620 885371650 885376650 885371700 885376700 885371800 885376800 P1 7 8 5 6 4 3 2 1 CONNECTIONS FROM TO P1-A P2-B F P1-B P2-A LENGTH (m) 1.0 +0.1/-0 2.0 +0.1/-0 3.0 +0.1/-0 4.0 +0.1/-0 5.0 +0.1/-0 7.0 +0.1/-0 8.0 +0.1/-0 10.0 +0.1/-0 15.0 +0.2/-0 20.0 +0.2/-0 25.0 +0.3/-0 30.0 +0.3/-0 40.0 +0.4/-0 60.0+0.6/-0 75.0+0.75/-0 90.0+0.90/-0 100.0 +1.0/-0 120.0 +1.2/-0 150.0 +1.5/-0 200.0 +2.0/-0 300.0 +3.0/-0 E LC/UPC DUPLEX CONNECTOR, BLUE HOUSING (2X) HEAT SHRINK TUBE, YELLOW 2.0mm ZIPCORD CABLE, SM ITU-T G.657.A1 BIF, YELLOW (TYPE-SEE TABLE) LABEL (2X) D HEAT SHRINK TUBE,WHITE B A A B HEAT SHRINK TUBE,WHITE C P2 HEAT SHRINK TUBE, YELLOW 2X 150 ±10 C 2X 25 LENGTH (SEE TABLE) NOTES: B B 1. DUST CAPS ARE INCLUDED, BUT NOT SHOWN. 2. LABEL CONTENT: MOLEX P/N AND SERIAL NUMBER. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 3. MAXIMUM INSERTION LOSS PER CONNECTOR @ 1310nm: 0.35dB. MAXIMUM RETURN LOSS PER CONNECTOR @ 1550nm: -50dB. A FORMAT: master-tb-prod-B REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/07/11 SCALE mm NTS ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 14:57:24 8 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 4. CABLE'S BEND RADII: INSTALLATION: 60mm OPERATING: 30mm DOCUMENT STATUS DIMENSION UNITS 7 6 5 4 LCD TO LCD 2.0MM SM ZIPCORD CABLE JUMPER, YELLOW EC NO: 710768 DRWN: JHUANG18 CHK'D: IGUMIN APPR: IGUMIN INITIAL REVISION: DRWN: SDXIE APPR: WCHEN THIRD ANGLE PROJECTION 3 2022/06/30 2022/07/11 2022/07/11 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/06/14 2019/07/15 DRAWING SERIES B-SIZE 88537 885371501 MATERIAL NUMBER SEE TABLE 2 PSD 000 CUSTOMER GENERAL MARKET D SHEET NUMBER 1 OF 1 1 A