0956224884

10 9 7 8 5 6 4 3 2 1 PART NO. 95622-4884 TYP. 0.76 8.89 TYP. 1.27 F F X 16.60 2.40 10 ⌯ 0.10 Z 9 6.35 15.15 19.20 E E 5 19.9 6.54 RECOMMENDED 3.60 7 16.6 6 15.9 18.1 8 13.63 KEEP OUT ZONE 2.54 RECOMMENDED P.C.B LAYOUT VIEW FROM COMPONENT SIDE ALL DIMENSIONS REF DIMENSIONS D D 11.94 4 C C 11 13.00 NOTES: 1. JACK FOR MATING WITH SHIELDED PLUG (MOLEX 95043 AND 85568 SERIES) 2. PRODUCT SPECIFICATION: PS-95622-001 3. PACKAGING SPECIFICATION: PK-95122-003 (BLISTER ON REEL) 16 4. COPLANARITY OF SIGNAL LEADS: 0.10MAX 5. RECOMMENDED PCB THICKNESS 1.57 4.0 15 0.25 14 2 1.27 ±0.15 LAST INSPECTION NO.: 16 B A 95° (x2) 1 POS 1 TECHNICAL SPECIFICATIONS: MATERIAL: HOUSING: LCP GLASS FILLED UL 94-V0, COLOUR BLACK. TERMINAL: COPPER ALLOY PLATED WITH: BASE FINISH: NICKEL CONTACT SURFACE FINISH: GOLD OR GOLD FLASH OVER PALLADIUM NICKEL. EXCEEDS PRODUCT REQUIREMENTS BASED ON PS-95622-001 SHIELD: COPPER ALLOY PLATED WITH TIN. DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2022/01/07 8.89 ±0.15 3 Z B 20.9 13 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: REMASTERED USING 3D MODELS GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 2.0 ° 0.25 0.35 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 18:02:01 8 PARTIAL 1 SCALE 4:1 18.8 12 7 6 5 4 FULLY SHIELDED TRUE SMT RIGHT ANGLE MODULAR JACK 8 CIRCUIT EC NO: 686752 DRWN: CRAODOREMS CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: DBYRNES APPR: EOMAHONY THIRD ANGLE PROJECTION 2018/02/09 2022/01/07 2022/01/07 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2006/07/27 2006/07/28 DRAWING SERIES A3-SIZE 95622 3 SD-95622-007 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET C1 SHEET NUMBER 1 OF 1 1 A 9 7 8 5 6 4 3 2 PART NO. F 2 95622-5881 8.89 1.27 TYP. POS 1. 0.76 TYP. 1 ⌯ 0.10 A 10 F 2.40 1 6.24 (x2) 18.1 16.6 11.94 7 13.63 +0.25 11.15 -0.15 D 13 95° (x2) TECHNICAL SPECIFICATIONS: MATERIAL: HOUSING: LCP GLASS FILLED UL 94-V0 COLOUR BLACK. TERMINAL: COPPER ALLOY PLATED WITH: BASE FINISH: NICKEL CONTACT SURFACE FINISH: GOLD, OR GOLD FLASH OVER PALLADIUM NICKEL. EXCEEDS PRODUCT REQUIREMENTS BASED ON PS-95622-001 11.43 REF 8 5.2 19 ⌯ 0.30 A DOCUMENT STATUS 10 P1 RELEASE DATE 9 2022/01/10 PARTIAL A 8.3 18 A 18.8 17 B 20.9 16 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: = 0 = 0 = 0 mm 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 2.0 ° 0.25 0.35 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 19:59:43 8 ⌀3.18 15 C 14 9 SHIELD: COPPER ALLOY PLATED WITH TIN. FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 0.25 12 1.27 ±0.15 1.05 POS 1 21 4.0 20 NOTES: 1. JACK FOR MATING WITH SHIELDED PLUG (MOLEX 95043 AND 85568 SERIES) 2. PRODUCT SPECIFICATION: PS-95622-001 3. PACKAGING SPECIFICATION: PK-95122-002 (TAPE AND REEL). 22 4. COPLANARITY OF SIGNAL LEADS: 0.10MAX 5. RECOMMENED PCB THICKNESS 1.57 13.00 RECOMMENDED P.C. BOARD LAYOUT. VIEW FROM COMPONENT SIDE. ALL DIMENSIONS REF DIMENSIONS 8.89 ±0.15 11 A E 3 6 (x2) 11.43 LAST INSPECTION NUMBER: 22 REMOVED INSPECTION NO: 10 B 4 ⌀3.25 3.60 (x2) C 5 KEEP OUT ZONE 2.54 (x2) D 15.9 18.80 E 15.15 TYP. 13.70 TYP. 6.35 TYP. 16.60 7 6 5 4 FULLY SHIELDED TRUE SMT RIGHT ANGLE MODULAR JACK 8 CIRCUIT EC NO: 686754 DRWN: DBYRNES CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: DBYRNES APPR: EFOLAN THIRD ANGLE PROJECTION 2021/11/09 2022/01/10 2022/01/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2009/11/20 2011/05/24 DRAWING SERIES A3-SIZE 95622 3 SD-95622-012 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET F2 SHEET NUMBER 1 OF 1 1 A