1050190001

1.40 ±0.05 YYMMDDS 14.39 1 E 16.50 ±0.05 9.50 0.50 Y PIN 20 0.28 ±0.03 ⌖ 0.06 X Y D KEEP OUT AREA 1.00 REF 9.00 PIN2 C D 4.50 16.10 ⌖ 0.06 X Y 9.28 17.84 10.96 13.56 1.80 ±0.05 �2X� ⌖ 0.06 X Y �0.22� 2 ⌖ 0.06 X Y 0.50 REF 3 NOTES: 1.MATERIAL: HOUSING:HIGH TEMPERATURE THERMAL PLASTIC,BLACK,30 GLASS FILLED, UL94V-0. TERMINAL: COPPER ALLOY. SHELL: COPPER ALLOY. 2.PLATING: TERMINAL:CONTACT AREA : (1) 0.76MICROMETER GOLD PLATING (2) GOLD FLASH PLATING AND SOLDER TAIL(a) 1~3MICROMETER MATT TIN PLATING D3 (b)GOLD FLSAH PLATING PIN 1 UNDER PLATING: 1 MICROMETER MIN. NICKEL PLATING OVERALL SHELL:1.27~2.54 MICROMETER SOLDERABLE NICKEL PLATING OVERALL 3. SOLDER TAIL COPLANARITY 0.10MAX. 4. PRODUCT SPECIFICATION REFER TO PS-47272-001 5. PACKAGE SPECIFICATION REFER TO PK-105019-001 9.50 E 4 3.00 ±0.05 �2X� 16.90 0.50 PITCH 5 6 1.60 ±0.05 �2X� 7 8 2.40 ±0.05 9 PIN20 1.64 0.50 0 -0.10 C 9.00 PIN1 6.02 16.50 ⌖ 0.06 X Y 6.50 6.65 0.50 MIN 7.00 1.30 ±0.05 �4X� PCB EDGE CONNECTOR EDGE 1.00 PITCH 0.40 X ⌖ 0.06 X Y 1.00 PIN19 B RECOMMENDED PCB LAYOUT(THICKNESS=1.6±0.15) 1.00 1.80 B 3.40 REF 1.64 0 -0.10 4.76 0.70 ±0.05 �4X� 1.10 ±0.05 �2X� CUTAWAY1 1.50 9.28 2.91 16.50 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM 5:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A MM 4 PLACES ± 3 PLACES ± ± 2 PLACES ± 0.25 ± ± 0.25 ± 1 PLACE 0 PLACES ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 9 P1 RELEASE DATE 2020/01/16 8 INCH ± ± ± 2.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 06:07:31 7 6 5 4 EC NO: 628958 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: HHE APPR: JNCHEN THIRD ANGLE PROJECTION DRAWING 2018/10/22 2020/01/16 2020/01/16 DOC TYPE DOC PART REVISION SD-105019-001 MATERIAL NUMBER SERIES A3-SIZE 105019 3 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2007/05/12 2007/05/12 2 A 1.0MM PITCH DISPLAY PORT REVERSE TYPE R/A RECEPTACLE SEE TABLE PSD 001 E SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 2 9 7 8 E 5 6 P/N POST 105019-0001 105019-0005 105019-0006 105019-0007 105019-0008 WITHOUT WITHOUT WITH WITHOUT WITHOUT PLATING ON CONTACT AREA SEE NOTE 2(1) SEE NOTE 2(2) SEE NOTE 2(2) SEE NOTE 2(1) SEE NOTE 2(2) 4 3 2 1 PLATING ON SOLDEING TAIL SEE NOTE 2(a) SEE NOTE 2(a) SEE NOTE 2(a) SEE NOTE 2(b) SEE NOTE 2(b) E 16.50 ±0.05 Y PIN 20 PIN 1 D D 9.28 7.68 ⌀ 1.40 ±0.05 ⌖ 0.06 Y X C C X 8.25 8.25 B 1.80 B ⌀ 1.20 7.68 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION WITH POST DIMENSION UNITS SCALE MM 5:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A MM 4 PLACES ± 3 PLACES ± NOTES: 1. UNSPECIFIED DIMENSION ARE SAME AS SHEET1 ± 2 PLACES ± 0.25 ± ± 0.25 ± 1 PLACE 0 PLACES ± ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 9 P1 RELEASE DATE 2020/01/16 8 INCH ± ± ± 2.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 06:07:31 7 6 5 4 EC NO: 628958 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: HHE APPR: JNCHEN THIRD ANGLE PROJECTION DRAWING 2018/10/22 2020/01/16 2020/01/16 DOC TYPE DOC PART REVISION SD-105019-001 MATERIAL NUMBER SERIES A3-SIZE 105019 3 PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER 2007/05/12 2007/05/12 2 A 1.0MM PITCH DISPLAY PORT REVERSE TYPE R/A RECEPTACLE SEE TABLE PSD 001 E SHEET NUMBER CUSTOMER GENERAL MARKET 1 2 OF 2