1051330031

9 7 8 2.80 (2X) 5 6 4 3 2 1 0.80 (2X) 1.20 COVER 0.65 PITCH 0.45 (5X) 1.00 2.15 1.00 2.30 (3X) 1.50 (5X) 5.60 PIN 1 E PIN 5 1.10 ⌀ 3.00 REF 4.05 9.8 RECOMMENDED PCB LAYOUT (THICKNESS: 1.6mm) GENERAL TOLERANCE: ±0.05 D 4.75 ±0.05 8.0 8.0 8.5 6.90 +0.06 -0.02 0.48 +0.05 0.00 0 MIN 0.90 (5X) 3.8 C 0.65 PITCH 0.25 2.15 2.9 3.0 0.65 PITCH 0.22 MIN 2.60 2.60 1.10 ±0.05 1.85 +0.08 -0.02 E R 0.25 TYP 4.45 3.1 **** D 0.70 (2X) 2.80 PICK & PLACE AREA DATE CODE F 0.50 (3X) F 0.30 REF 10 C 0.37 MIN PIN 5 3.5 MAX 5.40 ±0.05 PIN 1 5 4 3 2 1 NOTES: 1. MATERIAL: HOUSING & COVER: HIGH TEMPERATURE THERMOPLASTIC, BLACK, UL94V-0; TERMINAL: COPPER ALLOY, THICKNESS: 0.15mm; SHELL: STAINLESS STEEL, THICKNESS: 0.30mm. 2. PLATING: TERMINAL: CONTACT AREA: MINIMUM 0.75 MICRON GOLD; SOLDER TAIL AREA: GOLD FLASH; UNDER PLATING: NICKEL 2.0 MICRON MINIMUM. SHELL: 1.27 MICRON MINIMUM SOLDERABLE NICKEL PLATING OVER ALL. 3. TAIL COPLANARITY 0.08mm MAXIMUM. 4. PRODUCT SPECIFICATION: PS-105133-001. 5. PACKAGE SPECIFICATION: PK-105133-003. B A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 10 P1 RELEASE DATE 9 2022/06/08 4.2 Z 9.4 B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 3.0 ° 0.2 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 D+ DVBUS PIN NAME PIN ASSIGNMENT PART NUMBER 105133-0031 02:43:34 8 GND ID 6 5 4 SALES DRAWING FOR USB MICRO-B, VERTICAL TYPE EC NO: 678130 DRWN: XQZHANG CHK'D: AYIN APPR: AYIN INITIAL REVISION: DRWN: XQZHANG APPR: XQZHANG THIRD ANGLE PROJECTION 2021/10/28 2022/06/08 2022/06/08 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2013/07/01 2013/09/06 DRAWING SERIES A3-SIZE 105133 3 SD-105133-031 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 B SHEET NUMBER 1 OF 1 1 A