1054440011

10 9 7 8 5 6 4 3 2 1 PIN ASSIGNMENT F A12 A11 A10 A9 A8 GND RX2+ RX2- Vbus Sbu1 A7 A6 A5 D- D+ CC A4 A3 A2 A1 Vbus TX1- TX1+ GND NOTES: F 1. MATERIAL: HOUSING: THERMOPLASTIC, UL94-V0; COLOR:BLACK; INSERT MOLDING HOUSING: THERMOPLASTIC, UL94-V0;COLOR:BLACK; TERMINAL: COPPER ALLOY; OUTTER SHELL:STAINESS STEEL; FRONT SPRING::STAINESS STEEL; MIDDLE LATCH:STAINESS STEEL; ISOLATED LAYER:MYLAR; 2. FINISH: TERMINAL: 80 MICROINCH MIN. NICKEL UNDERPLATING OVERALL, E 120 MICROINCH MIN. TIN PLATING ON SOLDERING AREA;; PLEASE REFER TO TABLE FOR CONTACT AREA PLATING; OUTTER SHELL: 50 MICROINCH MIN. BRIGHT NICKEL UNDERPLATING OVERALL, FRONT SPRING: 50 MICROINCH MIN. NICKEL UNDERPLATING OVERALL; MIDDLE LATCH: 50 MICROINCH MIN. NICKEL UNDERPLATING OVERALL; 3. PRODUCT SPECIFICATION:1054440001 4. PACKAGE SPECIFICATION:1054440001(PACKAGE WIHT TRARY) PACKAGE SPECIFICATION:1054441001(PACKAGE WIHT TAPE AND REEL) Sbu2 VbuS RX1- RX1+ GND B8 B9 B10 B11 B12 GND TX2+ TX2- Vbus Vconn B4 B5 B1 B2 B3 E 5.50 ±0.08 0.50 ±0.04 (PITCH) 22*0.14~0.245 (TERMINAL WIDTH) 3.84 A12 0.80 ±0.10 2.75 1.30 ±0.025 A1 0.80 ±0.025 2.40 ±0.03 6*0.18MIN B1 +0.25 4*0.84 -0.05 4* 1.72 MIN 2* 0.53 ±0.025 0.60 ±0.12 LASER WELDING ON BOTH SIDES D B12 22*0.27MIN D 8.60 6.83 ±0.025 6.10 1.00 ±0.03 3.42 ±0.03 8.25 ±0.03 1.00 C 7.50 6.54 (2X) 7.70 8.30 12.00 2.50 5.50 0.50 ±0.05 (PITCH) 0.23 ±0.05 (A1/4/9/12&B1/4/9/12) B FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: DEFINE THE LASER WELDING 6.84 9.18 FIGURE WITH CAP PART NUMBER 1054440001 1054440101 1054440201 1054440011 1054440111 1054440211 A RELEASE DATE 9 C 10.00 0.18 ±0.05 (A2/3/6/7/10/11&B2/3/10/11) 0.21 ±0.05 (A5/8&B5/8) P1 1.50 ±0.03 0.50 ±0.03 RECOMMENDED PCB LAYOUT (DEFAULT TOLERANCE :+/-0.05) 12.60 DOCUMENT STATUS 1.84 (2X) 1.15 (2X) 0.70 ±0.03 (2X) 0.38 ±0.03 (22X) 2.60 FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 3.42 ±0.03 10.86 0.50 ±0.03 (PITCH) B 0.80 ±0.03 2022/07/04 PLATING ON TERMINAL CONTACT AREA 30 MICROINCH MIN. GOLD PLATING GOLD FLASH OVER 30MICROINCH PbNi 15 MICROINCH MIN. GOLD PLATING 30 MICROINCH MIN. GOLD PLATING GOLD FLASH OVER 30MICROINCH PbNi 15 MICROINCH MIN. GOLD PLATING 7 0 = 0 = 0 TRAY TAPE AND REEL 6 mm 8:1 ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° 0.25 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 LOCATION. GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL PACAGE TYPE 04:40:55 8 = 4 USB C PLUG,SPLINT EC NO: 711466 DRWN: FYANG05 CHK'D: RLI09 APPR: RLI09 INITIAL REVISION: DRWN: FYANG05 APPR: RZHANG THIRD ANGLE PROJECTION 2022/06/23 2022/07/04 2022/07/04 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/26 2015/12/02 DRAWING SERIES A3-SIZE 105444 3 1054440001 MATERIAL NUMBER PSD SM CUSTOMER GENERAL MARKETING SEE TABLE 2 C1 SHEET NUMBER 1 OF 1 1 A