Brad® PROFINET*
IO-Link* HarshIO Modules
Brad® PROFINET* IO-Link* HarshIO Modules, designed for factory automation machine
builders, bring versatility and cost-savings to complex system designs through
PROFINET* controllers
Features and Advantages
Ultra-Lock® M12 Connectors
Surpasses performance
and reliability of traditional
threaded connectors,
delivering increased
productivity and cost savings
4-pole and 5-pole power
connector versions
Ready for both America
and Europe regions
Seal rated IP67
Designed for plant-floor
and harsh industrial
applications. Eliminates
ingress of dust and light
jets of water
1x IO-Link* Master and 1x
Digital I/O per M12 port
Each IO-Link* master channel
can be configured as IO-Link*
or Digital I/O point (Pin 4).
Each digital channel can be
configured as an Input or an
Output point (Pin 2)
8x IO-Link*
Master Channels Specifications v1.1.
COM1, COM2 and COM3
Diagnostic LEDs
Blue LEDs dedicated to IO-Link*
communication status.
Status and troubleshooting make easy
with LEDs for power, network and I/O
signals
2-port Ethernet Switch
For daisy chain of PROFINET*
network. Manages new cybersecurity
requirement (Netload) and Ethernet
ring redundancy (MRP)
3 Rotary Switches
IP address setting
Versatile PROFINET* I/O Module
Specification v2.32 Class B
Standard RT, Netload class A.
SNMP, LLDP, FSU ready.
Easy replacement.
Configuration via GSD File.
IO access to IO-Link* process, event and service data
Ethernet Metallic Plate
Allow both ODVA and
PI Ethernet grounding
strategies
Applications
Industrial Automation
Food and Beverage
Machine Manufacturers
Machining Centers
Grinding and Milling
Conveying and Sorting
Baggage Handling
Postal Sorting
Packaging Applications
Conveying and Sorting
Automotive
Final Body Assembly
Power Train
*Both PROFINET and IO-Link are registered trademarks of PROFIBUS International
Robot Cells
Food and Beverage
Brad® PROFINET*
IO-Link* HarshIO Modules
Specifications - HarshIO Modules
REFERENCE INFORMATION
IO-Link Channel(s)
Port Class A
Support COM1, COM2 and COM3
Compliant with IO-Link* version 1.1
Power Supply: max. 1.6A (pin 1)
SIO Modes
Input: PNPa, Sinking, IEC 61131-2 Type 1
Output: PNP, Sourcing, 0.5A, short Circuit
Connector: Ultra-Lock® M12, 4-pin, female, stainless steel
SHOCK AND VIBRATION
Vibration: EN 60068-2-6 / EN 60068-2-29
Shock: EN 60068-2-6 / EN 60068-2-29
REGULATORY APPROVALS
PI certification
CE, RoHS, REACH, cULus / CSA 22.2
EMC: EN 61000-6-2 / EN 61000-6-4
INPUT CHANNEL(S)
Input type: PNP, Sinking, IEC 61131-2 Type 3
Diagnostic LED
Short circuit protection and overcurrent protection
Sensor Power Supply: 1.6A (pin 1)
Input filter: 0, 1, 3 or 5ms
Connector: Ultra-Lock® M12, 4-pin, female, stainless steel
FIELDBUS
Network connectors: 2x Ultra-Lock M12, 4-pole, female,
D-Coded, stainless steel
Diagnostic led per port (Link / Speed / Activity)
3x Rotary switches (DCP, factory reset)
PROFINET IO-Device spec v2.3 Class-B
Support of I/O and acyclic communications
Diagnostic alarms
Ethernet Packet: Manage up to 3000 packet/sec
Min refresh I/O Interval: 1ms
Topology: LLDP sender/receiver, SNMP V1
Netload: Class 1
Description file: Yes (GSD)
OUTPUT CHANNELS
Output type: PNP, Sourcing (Output [UL] power supply)
Output current: 2A per channel, max. 8.0A at 25°C
Diagnostic leds
Short circuit protection (up to 6.5A) and overcurrent protection
Connector: Ultra-Lock® M12, 4-pin, female, stainless steel
Output can be configured to power IO-Link* 16 digital I/O hub
Switching frequency: 200Hz
GENERAL
IP67 housing
Dimensions: 238 x 60 x 39 mm
Operating temperature: -25° to +70° C
Storage temperature: -40° to +70° C
Relative Humidity: 10…95%, non-condensing
Firmware upgradable
Specifications - IO-Link* Digital Hubs
REFERENCE INFORMATION
IO-Link Channel(s)
Port Class A
Support COM1, COM2 and COM3
Compliant with IO-Link* version 1.1
Power Supply: max. 1.6A (pin 1)
Connector: M12, 4-pin, male, stainless steel
Minimum Cycle Time: 1ms
INPUT CHANNEL(S)
Input type: PNP, Sinking, IEC 61131-2 Type 3
Diagnostic LED
Short circuit protection and overcurrent protection
Sensor Power Supply: 0.2A (pin 1)
Input filter: 0.5 to 3ms (filter step 0.5)
Connector: M12, 4-pin, female, stainless steel
GENERAL
IP67 housing
Dimensions: 152 x 54 x 29.6 mm
Operating temperature: -25° to +70° C
Storage temperature: -40° to +90° C
Mounting holes
Relative Humidity: 10…95%, non-condensing
Housing material: PBT VALOX 420 SEO
Flammability Standard: UL 94 V-0
OUTPUT CHANNELS
Output type: PNP, Sourcing
Output current: 0.5A per channel (max. 2A total for all outputs)
Diagnostic leds
Short circuit protection and overcurrent protection
Connector: M12, 4-pin, female, stainless steel
Switching frequency: 200Hz
SHOCK AND VIBRATION
Vibration: EN 60068-2-6 / EN 60068-2-29
Shock: EN 60068-2-6 / EN 60068-2-29
REGULATORY APPROVALS
IO-Link* certification
CE, RoHS, REACH, cULus / CSA 22.2
EMC: EN 61000-6-2 / EN 61000-6-4
Ordering Information
Engineering No.
Order No.
TCIEP-888P-D1U
112095-5119
TCIEP-888P-DYU
112095-5120
Engineering No.
Order No.
TEDIO-8D0P-808
112103-5000
TEDIO-8B4P-808
112103-5001
Description
Power Connector
HarshIO PROFINET*, 8x IO-Link* + 8x Digital IO User Configurable
Description
5-pole M12 (Mini-Change®)
4-pole M12 (Mini-Change®)
Digital
IP67 IO-Link* Digital I/O Hub, 8x M12 ports
16x Inputs
12x Inputs + 4x Outputs
*Both PROFINET and IO-Link are registered trademarks of PROFIBUS International
www.molex.com/link/harshio.html
Order No. 987651-5251
USA/0k/GF/2016.12
©2016 Molex