1200662155

12 11 10 9 8 FEMALE FACE VIEW 3 POLE H 6 PART NO ENGINEERING NO. 4 POLE 2 7 5 4 FINISHED LENGTH POLES CABLE DIA. 5 POLE 2 2 3 3 3 1200660228 883032K05M005 0.5M [1FT 7 IN] 3 .20/5.1 1200662157 885032K05M100 10M [32FT 9 IN] 5 .23/5.8 1200662223 884032K05M200 20M [65FT 7 IN] 4 .21/5.3 3 2 MALE FACE VIEW E 3-POLE 1 5 4 5 1 BROWN 2 NOT USED 3 BLUE 4 BLACK 5 NOT USED G 1 BROWN 2 WHITE 3 BLUE 4 BLACK 5 NOT USED 2 3 2 5 1 BROWN 2 WHITE 3 BLUE 4 BLACK 1 BROWN 2 WHITE 3 BLUE 4 BLACK 5 GRAY 1 1 4 4 1 BROWN 3 BLUE 4 BLACK 4 5 5-POLE H 1 4 4-POLE 1 3 3 4 1 1 1 BROWN 2 WHITE 3 BLUE 4 BLACK 5 GRAY G 4.0 102 1.81 46.0 F 1.22 31.0 CABLE DIA. (SEE P/N CHART) F 1.19 30.1 E D C B E NOTES: 1. MATERIAL: AS NOTED 2. FINISH: AS NOTED 3. ELECTRICAL: VOLTAGE: 250V CURRENT: 4A E 4. TEMP RATING: -20°TO +105°C 5. PROTECTION: IP67 (WHEN MATED) 6. COUPLING THREAD: M12X1 7. UL RECOGNIZED FILE: E152210 CSA CERTIFIED FILE: LR6837 8. ALL DIMENSIONS ARE FOR REFERENCE UNLESS TOLERANCED OR NOTED OTHERWISE Ø.57 TYP. 14.5 PART NO. MATRIX TORSIONAL FLEX TEST 10 MILLION CYCLES PER MIL-C-13777G BEND FLEX TEST 10 MILLION CYCLES PER MIL-C-13777G WELD SLAG RESISTANCE WOODHEAD STANDARD S-300 10 WRAP LABEL VINYL BLACK/YELLOW 9 OVERMOLD TPC YELLOW 8 COUPLING NUT BRASS NICKEL PLATED CONTACT PIN COPPER ALLOY POLES (3,4 & 5) FUNCTIONAL SYMBOLS GOLD PLATED PUR BLACK =0 5 O-RING VITON RED =0 4 COUPLING NUT BRASS NICKEL PLATED 3 CONTACT SOCKET COPPER ALLOY GOLD PLATED 2 FEMALE INSERT PUR BLACK 1 CABLE 22AWG TPE JACKET YELLOW DOCUMENT STATUS 12 FORMAT: IN-ACAD-tb-prod-C REVISION: B DATE: 2020/01/14 P1 MATERIAL 13:29:01 RELEASE DATE 2020/10/23 11 10 =0 SCALE INCH/MM NTS mm INCH 4 PLACES ± ---- ± ---- 3 PLACES ± ---- ± ---± ---- ± ---- ± ---- 0 PLACES ± ---- ± ---- ANGULAR TOL ± ---- ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 6 B CURRENT REV DESC: ITEM# 9 WAS TPE. UPDATED TEMP RATING. MODIFIED MATERIAL TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) 1 PLACE 8 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS DIVISIONAL SYMBOLS 2 PLACES ± ---- FINISH 9 CABLE LENGTH TOLERANCES