1200878704

20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M TABLE OF CONTENTS L SHEET NO. SHEET DESCRIPTION 1 NOTES AND BOM 2 CONFIGURATIONS 3-4 K DESCRIPTION 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 RECEPTACLE CONNECTOR ASSEMBLY 6 BACKSHELL NOTES 7 BACKSHELL 8 BACKSHELL CONFIGURATIONS MATING INTERFACE/CONNECTOR DRAWINGS DESCRIPTION DRAWING NO. MOLEX INLINE INTERFACE DEFINITION 1X2 PK-31300-635 1X2 *150-S-002-1-Z05 SD-33481-0001 1X6 PK-31300-903 1X6 *150-S-006-1-Z03 SD-33481-0001 L -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR KEY CONFIGURATIONS 5 PACKAGING NOTES: VALID UNLESS OTHERWISE SPECIFIED MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH DEVICE OR CONNECTOR AS SPECIFIED IN THE MATING INTERFACE/CONNECTOR DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESSED AT . K -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION (SEE PLR PRE-LOCK VIEW SHEET 5). b. PRODUCT SPECIFICATION SEE: -STANDARD CONFIGURATION: PS-33471-000 -UL V0 CONFIGURATION: PS-160105-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), J J TERMINALS, WIRE DIAMETER RANGE, PRODUCT VALIDATION, AND PRODUCT DEVIATIONS. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: SEE PACKAGING CHART d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-301 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) H H 2. DESIGN - MATERIALS: 1x2 a. FOR BILL OF MATERIALS SEE: -STANDARD CONFIGURATION SD-33471-0002 -UL V0 CONFIGURATION SD-160105-0002 3. DESIGN - GEOMETRY: a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART WITH THE EXCEPTION OF UNDERLINED DIMENSIONS. DIMENSIONAL INFORMATION NOT SHOWN G G ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. F F f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B). g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR FOR ADDITIONAL INFORMATION SEE SECTION 5 UNDER PROCEDURES IN ES-34735-008. E E D A1 A 2 UPDATE VIEWSETS LAST NUMBER: 11 1 INITIAL RELEASE REV REV DESCRIPTION REMOVED: C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = B 1x6 DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 0 mm 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 ANGULAR TOL = A MINOR GEOMETRY CHANGE FOR UL V0 INSPECTION NUMBER LOG ADDED: 11 D UPDATED THE DRAWING FRAME 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSHI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 1 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION CONFIGURATIONS L L K K J J 1x2 - STD 1x2 - UL V0* H H G G F F E E D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = B 1x6 - STD DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 1x6 - UL V0* RELEASE DATE 18 2020/08/26 17 0 mm 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 ANGULAR TOL = A D *MINOR GEOMETRY DIFFERENCE THAN STANDARD CONFIGUATION SEE NOTES 1 & 2 FOR MORE INFORMATION 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 2 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 SHEET DESCRIPTION M M KEY CONFIGURATIONS 1X2 L L 60° 60° K K KEY A J 35° 60° J H H KEY B 35° 60° G G F F KEY C 35° 35° E E D D KEY D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 3 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M SHEET DESCRIPTION 1X6 KEY CONFIGURATIONS CONT. L L 60° 60° K K KEY A J J 30° 60° H H KEY B G G 30° 60° F F KEY C E E 30° 30° D D KEY D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 4 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 CHARTED DIMENSIONS SHEET DESCRIPTION DIMENSIONS DESCRIPTION RECEPTACLE CONNECTOR ASSEMBLY - STD M A 1X2 19.40 B C D E F 1.75 21.73 20.55 37.65 19.64 L L 1X6 32.75 1.75 35.21 19.90 37.65 N/A N/A 1.75 35.23 19.90 37.65 33.64 1X6 UL V0 *DIM F MAX. *APPLIE TO UL V0 CONFIGURATIONS ONLY K ⌀DIM C MIN PASS-THRU WITH NO CLEARANCE 11 LASER MARKING ON THIS SURFACE TERMINAL Z SEE NOTE 3g. K 2 POSITION 1 X J DIM D MAX J 3 H H 3.50 TYP Z LAST 4X DIM B DIM E MAX X 1 DIM A MAX 5 G TERMINAL POSITION G REAR VIEW (WIRE HARNESS SIDE) MOLD CAVITY I.D. F THIS LOCATION F RECYCLE CODE THIS LOCATION MANUFACTURING LOCATION CODE THIS LOCATION E E D D 2.75±0.50 6 C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION IN FINAL-LOCK POSITION SECTION Z-Z A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 SECTION X-X 2020/08/26 17 15 14 13 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 5 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION BACKSHELL NOTES L L BACKSHELL NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34951-001 -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY SPECIFIED IN MOLEX DRAWING SD-33471-0001. -SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. K K -COMPONENTS ARE OPTIONAL AND MUST BE PURCHASED SEPERATELY. -BACKSHELL DESIGN IS OWNED BY SCHLEMMER. -FOR ADDITIONAL INFORMATION SEE THE BACKSHELL COMPONENT DRAWING SD-34949-0001. J J BACKSHELL (BKS) BACKSHELL CUSTOMER MODEL NUMBER LEGEND 34949-XXXX H H CUSTOMER MODEL COMPONENTS 0 - BACKSHELL ONLY 1 - BACKSHELL & MX150 HOUSING KEY A ASSEMBLY 2 - BACKSHELL & MX150 HOUSING KEY B ASSEMBLY 3 - BACKSHELL & MX150 HOUSING KEY C ASSEMBLY 4 - BACKSHELL & MX150 HOUSING KEY D ASSEMBLY 1X2 BACKSHELL FEATURES 1 - WITH RIBS 2 - WITHOUT RIBS G RECEPTACLE SEALED ASSEMBLY G MX150 CIRCUIT SIZE 02, 03, 04, 05, 06 F F E E D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 6 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION BACKSHELL L L W K K J J W H H G G 11.00 1.50 F F 10.70 6.50 E E Partial W-W SCALE 4:1 D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 7 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M SHEET DESCRIPTION CHARTED DIMENSIONS BACKSHELL CONFIGURATIONS DESCRIPTION DIMENSIONS 1X2 G 26.00 L L K K J J (71.20) ⌀DIM G MIN PASS-THRU WITH NO CLEARANCE H H G G F F E E RECEPTACLE SEALED ASSEMBLY WITH RECEPTACLE BACKSHELL D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 8 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M TABLE OF CONTENTS L K SHEET NO. SHEET DESCRIPTION 1 NOTES 2 KEY CONFIGURATIONS 3 RECEPTACLE SEALED ASSEMBLY 4 BACKSHELL NOTES 5 BACKSHELL 6 BACKSHELL CONFIGURATION NOTES: VALID UNLESS OTHERWISE SPECIFIED BOM 7 CPA J OPTIONAL SEE BOM GROMMET CAP H CONNECTOR HOUSING FOR OPTIONS SEE BOM K J H 2. DESIGN - MATERIALS: a. CONNECTOR HOUSING, GROMMET CAP, PLR: SPS/NYLON BLEND 20% GLASS FILLED CPA: PBT 20% GLASS FILLED MAT SEAL, RING SEAL: INHERENTLY LUBRICATED SILICONE 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) g. LASER MARKING: TBD G RING SEAL MAT SEAL L 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH DEVICE CONNECTION AS SPECIFIED IN DRAWING EWCAP 150-S-003-1-Z05, AVAILIBLE AT . -DESIGNED TO MATE WITH BLADE SEALED ASSEMBLY AS SPECIFIED IN DRAWING SD-33481-031 -FOR 1.5mm RECEPTACLE TERMINALS TO BE USED WITH THIS ASSEMBLY. SEE MOLEX DRAWING SD-33012-002. -SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2 mm TO 2.69 mm. -ASSEMBLY SHIPPED WITH PLR AND CPA IN PRE-LOCK POSITION (SEE SECTION Z-Z PRE-LOCK). -IN THE EVENT THAT THE PLR IS FOUND IN THE SEATED (FINAL LOCK) POSITION, REFER TO MOLEX SPECIFICATION PS-34646-001, AVAILABLE AT www.molex.com . -ASSEMBLY CONFORMS TO SAE/USCAR-2 REV.4 WITH THE FOLLOWING EXCEPTIONS: ENGAGEMENT FORCE TO MOVE CPA FROM PRE-LOCK TO FINAL LOCK POSITION WHEN UNMATED: 40N MIN. DISENGAGEMENT FORCE TO MOVE CPA FROM FINAL LOCK TO PRE-LOCK POSITION: 3N MIN, 40N MAX TERMINAL INSERTION FORCE FOR WIRE DIAMETER ABOVE 2.5mm NOT EXCEEDING 2.69mm SHALL NOT EXCEED 40 NEWTONS. b. PRODUCT SPECIFICATION SEE: PS-33471-000 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-635 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) G F F PRIMARY LOCK REINFORCEMENT (PLR) E E D UPDATED THE DRAWING FRAME Q7 ADD NEW P/NS 33471-33XX Q6 UPDATED VIEWS Q5 ADD BACKSHELL CONFIGURATION Q4 EM-33471-301 INSPECTION NUMBER LOG EM-33471-302 LAST NUMBER USED: 5 EM-33471-303 ADDED: EM-33471-304 REMOVED: C D ADD NEW P/N 33471-0347 334710345 IS SAME AS 334710340 Q3 MODELS USED Q2 SO VOID 334710345 CHANGE THE STATUS TO SALEABLE Q1 UPDATED NOTES Q REDRAWN REV DESCRIPTION FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = B DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 0 mm 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:55 16 0 ANGULAR TOL = A R 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2002/06/18 2002/06/18 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X3 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 1 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M 60° KEY CONFIGURATIONS 60° L L K K KEY A J J 35° 60° H H G G KEY B 35° F 60° F E E KEY C D D 35° 35° C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = KEY D A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:55 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2002/06/18 2002/06/18 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X3 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 2 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 RECEPTACLE SEALED ASSEMBLY M M ⌀24.97 LASER MARKING ON THIS SURFACE SEE NOTE 3g. L MIN PASS-THRU WITH NO CLEARANCE Z Y L TERMINAL POSITION 3 TERMINAL POSITION 1 3 K K 19.80+0.10 -0.35 J J 5 Y 2 2X 3.50 22.15+0.10 -0.40 Z 36.95±0.70 REAR VIEW (WIRE HARNESS SIDE) 4 H H MOLD CAVITY CODE RECYCLE CODE G G F F LOCATION CODE E E 2.75±0.50 1 D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN FINAL LOCK POSITION IN PRE-STAGED POSITION SECTION Z-Z A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 SECTION Y-Y 2020/08/26 17 15 14 13 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:55 16 0 mm ANGULAR TOL = B 0 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2002/06/18 2002/06/18 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X3 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 3 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M BACKSHELL NOTES BACKSHELL (BKS) L L K K BACKSHELL NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34951-001 -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY SPECIFIED IN MOLEX DRAWING SD-33471-031. RECEPTACLE SEALED ASSEMBLY -SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. J J -COMPONENTS ARE OPTIONAL AND MUST BE PURCHASED SEPERATELY. -BACKSHELL DESIGN IS OWNED BY SCHLEMMER. -FOR ADDITIONAL INFORMATION SEE THE BACKSHELL COMPONENT DRAWING SD-34949-0001. H H G G F F E E D D BACKSHELL CUSTOMER MODEL NUMBER LEGEND 34949-XXXX C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: CUSTOMER MODEL COMPONENTS 0 - BACKSHELL ONLY 1 - BACKSHELL & MX150 HOUSING KEY A ASSEMBLY 2 - BACKSHELL & MX150 HOUSING KEY B ASSEMBLY 3 - BACKSHELL & MX150 HOUSING KEY C ASSEMBLY 4 - BACKSHELL & MX150 HOUSING KEY D ASSEMBLY = = B MX150 CIRCUIT SIZE 02, 03, 04, 05, 06 A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:55 16 0 mm ANGULAR TOL = BACKSHELL FEATURES 1 - WITH RIBS 2 - WITHOUT RIBS 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2002/06/18 2002/06/18 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X3 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 4 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M BACKSHELL THE VIEWS ON THIS SHEET ARE L L IN THE CLOSED UN-ASSEMBLED POSITION W K K J J H H W G G F F 11.00 1.50 E E D D 6.40 10.70 SECTION W-W C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:55 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2002/06/18 2002/06/18 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X3 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 5 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M BACKSHELL CONFIGURATIONS L L K K (71.20) ⌀29.00 MIN PASS-THRU J J WITH NO CLEARANCE H H G G F F RECEPTACLE SEALED ASSEMBLY WITH RECEPTACLE BACKSHELL E E D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:55 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2002/06/18 2002/06/18 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X3 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 6 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M PART L KEYING COLOR OPTION NUMBER & STATUS X = PLUGGED 1 2 * D 34949-0320 33471-3301 BLACK A - SALEABLE 34949-0310 34949-0320 33471-0302 LT.GRAY B - SALEABLE 34949-0310 34949-0320 33471-3302 LT.GRAY B - SALEABLE 34949-0310 34949-0320 33471-0303 BROWN C - NOT RECOMMENDED--SEE P/N 33471-0343 34949-0310 34949-0320 33471-3303 BROWN C - NOT RECOMMENDED--SEE P/N 33471-3343 34949-0310 34949-0320 33471-0304 GREEN D - NOT RECOMMENDED--SEE P/N 33471-0344 34949-0310 34949-0320 33471-3304 GREEN D - NOT RECOMMENDED--SEE P/N 33471-3344 34949-0310 34949-0320 VOIDED 33471-0306 BLACK A YES SALEABLE 34949-0310 34949-0320 33471-3306 BLACK A YES SALEABLE 34949-0310 34949-0320 33471-0307 LT.GRAY B YES SALEABLE 34949-0310 34949-0320 33471-3307 LT.GRAY B YES SALEABLE 34949-0310 34949-0320 33471-0308 BROWN C YES NOT RECOMMENDED--SEE P/N 33471-0340 34949-0310 34949-0320 33471-3308 BROWN C YES NOT RECOMMENDED--SEE P/N 33471-3340 34949-0310 34949-0320 33471-0309 GREEN D YES NOT RECOMMENDED--SEE P/N 33471-0346 34949-0310 34949-0320 33471-3309 GREEN D YES NOT RECOMMENDED--SEE P/N 33471-3346 34949-0310 34949-0320 33471-0311 BLACK A X - SALEABLE 34949-0310 34949-0320 33471-3311 BLACK A X - SALEABLE 34949-0310 34949-0320 33471-0312 LT.GRAY B X - SALEABLE 34949-0310 34949-0320 33471-3312 LT.GRAY B X - SALEABLE 34949-0310 34949-0320 33471-0313 BROWN C X - SALEABLE 34949-0310 34949-0320 33471-3313 BROWN C X - SALEABLE 34949-0310 34949-0320 33471-0314 GREEN D X - SALEABLE 34949-0310 34949-0320 33471-3314 GREEN D X - SALEABLE 34949-0310 34949-0320 VOIDED 33471-0316 BLACK A X YES SALEABLE 34949-0310 34949-0320 33471-3316 BLACK A X YES SALEABLE 34949-0310 34949-0320 33471-0317 LT.GRAY B X YES SALEABLE 34949-0310 34949-0320 33471-3317 LT.GRAY B X YES SALEABLE 34949-0310 34949-0320 33471-0318 BROWN C X YES SALEABLE 34949-0310 34949-0320 33471-3318 BROWN C X YES SALEABLE 34949-0310 34949-0320 33471-0319 GREEN D X YES SALEABLE 34949-0310 34949-0320 33471-3319 GREEN D X YES SALEABLE 34949-0310 34949-0320 VOIDED 33471-3320 33471-0321 BLACK A X X - SALEABLE 34949-0310 34949-0320 33471-3321 BLACK A X X - SALEABLE 34949-0310 34949-0320 33471-0322 LT.GRAY B X X - SALEABLE 34949-0310 34949-0320 33471-3322 LT.GRAY B X X - SALEABLE 34949-0310 34949-0320 33471-0323 BROWN C X X - SALEABLE 34949-0310 34949-0320 33471-3323 BROWN C X X - SALEABLE 34949-0310 34949-0320 33471-0324 GREEN D X X - SALEABLE 34949-0310 34949-0320 33471-3324 GREEN D X X - SALEABLE 34949-0310 34949-0320 33471-0326 BLACK A X X YES SALEABLE 34949-0310 34949-0320 33471-3326 BLACK A X X YES SALEABLE 34949-0310 34949-0320 33471-0327 LT.GRAY B X X YES SALEABLE 34949-0310 34949-0320 33471-3327 LT.GRAY B X X YES SALEABLE 34949-0310 34949-0320 33471-0328 BROWN C X X YES SALEABLE 34949-0310 34949-0320 33471-3328 BROWN C X X YES SALEABLE 34949-0310 34949-0320 33471-0329 GREEN D X X YES SALEABLE 34949-0310 34949-0320 33471-3329 GREEN D X X YES SALEABLE 34949-0310 34949-0320 33471-0331 BLACK A X X X - SALEABLE 34949-0310 34949-0320 33471-3331 BLACK A X X X - SALEABLE 34949-0310 34949-0320 33471-0332 LT.GRAY B X X X - SALEABLE 34949-0310 34949-0320 33471-3332 LT.GRAY B X X X - SALEABLE 34949-0310 34949-0320 33471-0333 BROWN C X X X - SALEABLE 34949-0310 34949-0320 33471-3333 BROWN C X X X - SALEABLE 34949-0310 34949-0320 33471-0334 GREEN D X X X - SALEABLE 34949-0310 34949-0320 33471-3334 GREEN D X X X - SALEABLE 34949-0310 34949-0320 SALEABLE 34949-0310 34949-0320 SALEABLE 34949-0310 34949-0320 SALEABLE 34949-0310 34949-0320 - SALEABLE 34949-0310 34949-0320 YES SALEABLE 34949-0310 34949-0320 SALEABLE 34949-0310 34949-0320 SALEABLE 34949-0310 34949-0320 SALEABLE 34949-0310 34949-0320 SALEABLE 34949-0310 34949-0320 OBSOLETE---SEE P/N 33471-3340 34949-0310 34949-0320 34949-0310 34949-0320 34949-0310 34949-0320 33471-3335 VOIDED 34949-0310 34949-0320 33471-3336 BLACK A X SALEABLE 34949-0310 34949-0320 33471-3337 BLACK A X SALEABLE 34949-0310 34949-0320 33471-3338 BLACK A X - SALEABLE 34949-0310 34949-0320 33471-3339 BLACK A X YES SALEABLE 34949-0310 34949-0320 33471-3340 DK.GRAY C X YES SALEABLE 34949-0310 34949-0320 33471-3341 LT.GRAY B X X YES SALEABLE 34949-0310 34949-0320 33471-3342 YES DK.GRAY C X YES SALEABLE 34949-0310 34949-0320 33471-3343 DK.GRAY C SALEABLE 34949-0310 34949-0320 33471-3344 ST.GRAY D OBSOLETE---SEE P/N 33471-0340 34949-0310 34949-0320 33471-3345 DK.GRAY C YES SALEABLE 34949-0310 34949-0320 33471-3346 ST.GRAY D YES SALEABLE 33471-3347 YELLOW A YES SALEABLE BLACK A X 33471-0337 BLACK A X 33471-0338 BLACK A X 33471-0339 BLACK A X 33471-0340 DK.GRAY C 33471-0341 LT.GRAY B 33471-0342 DK.GRAY C 33471-0343 DK.GRAY C 33471-0344 ST.GRAY D 33471-0345 DK.GRAY C YES 33471-0346 ST.GRAY D YES 33471-0347 YELLOW A YES X YES X YES - SALEABLE * * 34949-0320 34949-0310 F VOIDED SALEABLE 33471-0336 G VOIDED 33471-3330 VOIDED H VOIDED 33471-3325 VOIDED J VOIDED 33471-3315 VOIDED K VOIDED 33471-3310 VOIDED L VOIDED 33471-3305 X YES X YES - E D *FOR ASSEMBLY P/N'S 33471-3340 AND 33471-3342 REFER TO SALEABLE KEY OPTION C ASSEMBLY P/N'S ABOVE *FOR ASSEMBLY P/N'S 33471-0340 AND 33471-0342 REFER TO SALEABLE KEY OPTION C ASSEMBLY P/N'S ABOVE C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = B DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 0 mm GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:55 16 0 ANGULAR TOL = A BACKSHELL WITHOUT RIBS BACKSHELL WITH RIBS 3 34949-0310 33471-0335 * 2 SALEABLE 33471-0330 E 1 STATUS CPA - 33471-0325 F NUMBER KEYING COLOR OPTION OPTIONAL ATTATCHMENTS SOLD SEPARATELY A 33471-0320 G BACKSHELL WITHOUT RIBS PART CAVITY TYPE & STATUS X = PLUGGED BLACK 33471-0315 H BACKSHELL WITH RIBS Q7 ASSEMBLY 33471-0301 33471-0310 J STATUS CPA 3 33471-0305 K OPTIONAL ATTATCHMENTS SOLD SEPARATELY CAVITY TYPE ASSEMBLY 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2002/06/18 2002/06/18 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X3 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 7 OF 7 1 A