1301100050

13 12 11 10 9 8 6 7 5 3 4 2 1 J J 12.78/324.6 I I 9.94/252.5 NEMA 5-15 MOLDED CONNECTOR H H 3 FT LONG 18/3 STJW CORD WITH MOLDED PLUG G 36.00/914.4 G 10-GAUGE PLATED WIRE GUARD TWO KNOCK OUTS IN ACCESS PANEL (BOTH SIDES) 2.25/57.2 F F MATERIAL NO ENGR. NUMBER PULSE-START 1301100038 8575-MH NO 1301100050 8575-MH-PS YES 7.88/200.2 E E NOTES: 10.63/270.0 1. 400W METAL HALIDE BULB 2. PRODUCT TO BE SUPPLIED WITH A METAL HALIDE LAMP THAT INCORPORATES A QUARTZ SHROUD AND IS RATED O-TYPE TO COMPLY WITH ANSI STANDARD C78.387 FOR CONTAINMENT TEST AND USE IN OPEN LUMINARIES. EXCLUSIONARY LAMPHOLDER TYPE EX39 D C 4.75/120.7 3. SPRING-LOADED HOOK AND MOLDED CORDSET. 4. OVERALL LENGTH WITH WIRE GUARD: 22.9 IN. (582MM). 5. PULSE-START TECHNOLOGY IS REQUIRED IN THE U.S. (8575-MH FOR USE IN CANADA ONLY). 6. PRODUCT IS WIRED FOR 120V. QUAD-TAP BALLAST PROVIDES FOR OPTIONAL VOLTAGES OF 208V, 240V, 277V. 4.26/108.2 GENERAL TOLERANCES (UNLESS SPECIFIED) B DESCRIPTION =0 C =0 INCH mm 4 PLACES 3 PLACES 2 PLACES 1 PLACE ----0.13 0.25 --.005 .010 .020 SCALE DESIGN UNITS IN/MM NTS INCH DATE CHECKED BY DATE APPROVED BY DATE 1/2 A 13 12 11 10 9 8 REV A DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 6 5 C DIMENSION STYLE DRAWN BY MATERIAL NO. TITLE molex C THIRD ANGLE PROJECTION SHEET NO. SD-130110-002 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 3 B 400W METAL HALIDE HIGH BAY TEMPORARY LIGHTING FIXTURE MOLEX INCORPORATED DOCUMENT NO. SEE CHART SIZE D 2 1 A