146184-0100

PRODUCT SPECIFICATION TITLE Ultra Wideband PCB Antenna TABLE OF CONTENTS 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS 4.0 RATINGS 5.0 PERFORMANCE 6.0 TEST GROUPINGS 7.0 PACKING REVISION: ECR/ECN INFORMATION: TITLE: C EC No: ABU2016-0056 DATE: 2016-03-22 DOCUMENT NUMBER: PS-146184-100 SHEET No. Ultra Wideband PCB Antenna 1 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Liu Hai 2016-03-22 Ryan Liu 2016-03-22 Welson Tan 2016-03-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION Ultra Wideband PCB Antenna 1.0 SCOPE This Product Specification covers the mechanical, electrical and environmental performances requirements and test methods for ultra wideband PCB antenna. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: Ultra Wideband PCB Antenna 146184-0100 2.2 Design and Construction Antenna shall be of the design, construction and physical dimensions specified on the applicable sales drawing. 2.3 Materials a) PCB: Refer to respective Molex sales or engineering drawings b) Plating: Refer to respective Molex sales or engineering drawings c) Cable Line: Refer to respective Molex sales or engineering drawings d) Connector: Refer to respective Molex sales or engineering drawings 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See drawings and other sections of this specification for the relevant reference documents. In cases where the specification differs from the drawings, the drawings take precedence. 4.0 RATINGS 4.1 RF POWER 2 WATTS 4.2 TEMPERATU Operating: Storage : - 30°C to + 85°C - 40°C to + 95°C 4.3 HUMIDITY Operating : -30℃to+85℃ -30℃to+50℃, 85%RH or less +50℃to+85℃, 60%RH or less Storage : -40℃to+95℃ -40℃to+50℃, 85%RH or less +50℃to+95℃, 60%RH or less REVISION: ECR/ECN INFORMATION: TITLE: C EC No: ABU2016-0056 DATE: 2016-03-22 DOCUMENT NUMBER: PS-146184-100 SHEET No. Ultra Wideband PCB Antenna 2 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Liu Hai 2016-03-22 Ryan Liu 2016-03-22 Welson Tan 2016-03-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.0 PERFORMANCE 5.1 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 50mm (1461840050) ITEM DESCRIPTION 5.1.1 Frequency Range TEST CONDITION REQUIREMENT 3GHz~6GHz 3GHz~6GHz Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm long,1.13mm diameter micro coaxial cable. Measured by VNA5071C < -6dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 4.7 dBi 5.1.4 Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >74% 5.1.5 Polarization Measure antenna through the OTA chamber Linear 5.1.2 Return Loss 5.1.3 5.1.6 Input Impedance Measure antenna on recommended PC/ABS housing through VNA E5071C 50Ohms 5.2 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 100mm (1461840100) ITEM DESCRIPTION 5.2.1 Frequency Range TEST CONDITION REQUIREMENT 3GHz~6GHz 3GHz~6GHz Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm long,1.13mm diameter micro coaxial cable. Measured by VNA5071C < -6 dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 4.5 dBi 5.2.4 Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >70% 5.2.5 Polarization Measure antenna through the OTA chamber Linear 5.2.2 Return Loss 5.2.3 5.2.6 Input Impedance Measure antenna on recommended PC/ABS housing through VNA E5071C 50Ohms 5.3 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 150mm (1461840150) ITEM DESCRIPTION 5.3.1 Frequency Range TEST CONDITION REQUIREMENT 3GHz~6GHz 3GHz~6GHz Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm long,1.13mm diameter micro coaxial cable. Measured by VNA5071C < -6 dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 4.3 dBi 5.3.4 Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >66% 5.3.5 Polarization Measure antenna through the OTA chamber Linear 5.3.2 Return Loss 5.3.3 5.3.6 Input Impedance Measure antenna on recommended PC/ABS housing through VNA E5071C 50Ohms REVISION: ECR/ECN INFORMATION: TITLE: C EC No: ABU2016-0056 DATE: 2016-03-22 DOCUMENT NUMBER: PS-146184-100 SHEET No. Ultra Wideband PCB Antenna 3 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Liu Hai 2016-03-22 Ryan Liu 2016-03-22 Welson Tan 2016-03-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.4 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 200mm (1461840200) ITEM DESCRIPTION 5.4.1 Frequency Range TEST CONDITION REQUIREMENT 3GHz~6GHz 3GHz~6GHz Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm long,1.13mm diameter micro coaxial cable. Measured by VNA5071C 5.4.2 Return Loss 5.4.3 Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 4 dBi 5.4.4 Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >62% 5.4.5 Polarization Measure antenna through the OTA chamber Linear 5.4.6 Input Impedance < -6 dB Measure antenna on recommended PC/ABS housing through VNA E5071C 50Ohms 5.5 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 250mm (1461840250) ITEM DESCRIPTION 5.5.1 Frequency Range TEST CONDITION REQUIREMENT 3GHz~6GHz 3GHz~6GHz Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm long,1.13mm diameter micro coaxial cable. Measured by VNA5071C < -6 dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 3.8 dBi 5.5.4 Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >58% 5.5.5 Polarization Measure antenna through the OTA chamber Linear 5.5.2 Return Loss 5.5.3 5.5.6 Input Impedance Measure antenna on recommended PC/ABS housing through VNA E5071C 50Ohms 5.6 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 300mm (1461840300) ITEM DESCRIPTION 5.6.1 Frequency Range TEST CONDITION REQUIREMENT 3GHz~6GHz 3GHz~6GHz Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm long,1.13mm diameter micro coaxial cable. Measured by VNA5071C < -6 dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 3.5 dBi 5.6.4 Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >55% 5.6.5 Polarization Measure antenna through the OTA chamber Linear 5.6.2 Return Loss 5.6.3 5.6.6 Input Impedance Measure antenna on recommended PC/ABS housing through VNA E5071C 50Ohms REVISION: ECR/ECN INFORMATION: TITLE: C EC No: ABU2016-0056 DATE: 2016-03-22 DOCUMENT NUMBER: PS-146184-100 SHEET No. Ultra Wideband PCB Antenna 4 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Liu Hai 2016-03-22 Ryan Liu 2016-03-22 Welson Tan 2016-03-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.7 CABLE LOSS ITEM 5.7.1 DESCRIPTION Frequency Range 5.7.2 Attenuation REQUIREMENT TEST CONDITION 3GHz~6GHz 1m cable. Measured by VNA5071C 3GHz~5GHz 5GHz~6GHz ≤4dB/m ≤5dB/m 5.8 CABLE LENGTH AFFECT THE ANTENNA PERFORMANCE Balance antenna resonance is insensitive by cable’s length, but the cable’s loss will affect the total efficiency. Refer to 5.7 5.9 MECHANICAL REQUIREMENTS ITEM DESCRIPTION 5.9.1 Pull test TEST CONDITION REQUIREMENT Test machine : Max intelligent load tester Stick the flex antenna in a PC block, pull cable in horizontal direction Pull force >18N 5.10 RELIABILITY REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT 5.10.1 Cross section Cross section on pad soldering area. Check under microscope No soldering problem REVISION: ECR/ECN INFORMATION: TITLE: C EC No: ABU2016-0056 DATE: 2016-03-22 DOCUMENT NUMBER: PS-146184-100 SHEET No. Ultra Wideband PCB Antenna 5 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Liu Hai 2016-03-22 Ryan Liu 2016-03-22 Welson Tan 2016-03-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.11 ENVIRONMENTAL REQUIREMENTS ITEM 5.11.1 5.11.2 5.11.3 5.11.4 DESCRIPTION TEST CONDITION REQUIREMENT Temperature /Humidity cycling Test condition: 1) The device under test is kept for 30 mins in an environment with a temperature of -40 ℃. 2) Kept for 4 Hours in an environment with a temperature of 85 degrees and a relative 1) Parts should meet RF spec humidity of 95%. before and after test. 3) Kept for 2 Hours in an environment with a 2） No cosmetic problem temperature of 125 degrees and a relative humidity of 95%. 4) The cycle is repeated until a total of 40 cycles have been completed. Hereafter the conditions are stabilized at room temperature. Temperature Shock Test condition: 1) The device under test at -40 ℃⇔125 ℃ by 100 cycles, Dwell of 30 mins, transition time between Dwell 30 secs (~ 61 mins / cycle ) and each item should be measured after exposing them in normal temperature and humidity for 24 h. High Temperature Salt mist test 1) Parts should meet RF spec before and after test. 2） No cosmetic problem Test condition: 1) Temperature:125℃, time:1008hours 2) There is no substantial obstruction to air flow across and around the samples, and the samples are not touching each other Parts should meet RF spec before and after test. No cosmetic problem Test condition: 1) The device under test is exposed to a spray of a 5% (by volume) resolution of Nacl in water for 2 hours. Thereafter the device under test is left for 1 week in room temperature at a relative humidity of 95%. The cycle is repeated until a total of 2 cycles have been completed. Here after the conditions are stabilized at room temperature. 1) Parts should meet RF spec before and after test. 2) No visible corrosion. Discoloration accept. The meaning of text “No Cosmetic Problem” in the table above is: a. no soldering problem b. no adhesion problem of glue c. no peel off of plating REVISION: ECR/ECN INFORMATION: TITLE: C EC No: ABU2016-0056 DATE: 2016-03-22 DOCUMENT NUMBER: PS-146184-100 SHEET No. Ultra Wideband PCB Antenna 6 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Liu Hai 2016-03-22 Ryan Liu 2016-03-22 Welson Tan 2016-03-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 6.0 TEST GROUPINGS Test Item 5.9.1 Description Group1 Pull test Group2 Group3 Group4 Group5 Group6 X 5.10.1 Cross section 5.11.1 Temperature /Humidity cycling 5.11.2 Temperature Shock 5.11.3 High Temperature 5.11.4 Salt mist test X X X X X Sample Quantity 5 5 5 5 5 5 7.0 PACKAGING Refer to the Molex related packaging drawings. REVISION: ECR/ECN INFORMATION: TITLE: C EC No: ABU2016-0056 DATE: 2016-03-22 DOCUMENT NUMBER: PS-146184-100 SHEET No. Ultra Wideband PCB Antenna 7 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Liu Hai 2016-03-22 Ryan Liu 2016-03-22 Welson Tan 2016-03-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC