146185-0100

PRODUCT SPECIFICATION TITLE Cellular Quad Band Flex Antenna TABLE OF CONTENTS 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS 4.0 RATINGS 5.0 PERFORMANCE 6.0 TEST GROUPINGS 7.0 PACKING 8.0 CHANGE HISTORY REVISION: ECR/ECN INFORMATION: TITLE: B EC No: 726689 SHEET No. Cellular Quad Band Flex Antenna DATE: 2022/10/31 DOCUMENT NUMBER: PS-146185-100 1 of 8 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Colin. Xu Stary.Song Welson Tan TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION Cellular Quad Band Flex Antenna 1.0 SCOPE This Product Specification covers the mechanical, electrical and environmental performances requirements and test methods for Cellular Quad Band Flex Antenna with solder cable. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: Cellular Quad Band Flex Antenna-1461850100 2.2 Design and Construction Antenna construction and physical dimensions specified on the applicable sales drawing. 2.3 Materials a) Flex: Refer to sales drawing of 1461850100 b) Cable Line: Refer to sales drawing of 1461850100 c) Connector : Refer to sales drawing of 1461850100 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See drawings and other sections of this specification for the relevant reference documents. In cases where the specification differs from the drawings, the drawings take precedence. 4.0 RATINGS 4.1 RF POWER 2 WATTS MAX 4.2 TEMPERATURE Operating: Storage : 4.3 HUMIDITY Operating: Storage : - 30°C to 85°C - 40°C to 95°C -30°C to 85°C -30°C to 50°C, 85%RH or less 50°C to 85°C, 60%RH or less -40°C to 95°C -40°C to 50°C, 85%RH or less 50°C to 95°C, 60%RH or less REVISION: ECR/ECN INFORMATION: TITLE: B EC No: 726689 SHEET No. Cellular Quad Band Flex Antenna DATE: 2022/10/31 DOCUMENT NUMBER: PS-146185-100 2 of 8 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Colin. Xu Stary.Song Welson Tan TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.0 PERFORMANCE 5.1 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 50mm (1461850050) DESCRIPTION TEST CONDITION REQUIREMENTS Frequency Range 0.824GHz~2.7GHz 824MHz~960MHz 1.71GHz~2.7GHz Return Loss Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm 1.13mm diameter micro coaxial cable Measured by VNA5071C < -4 dB < -4 dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 1.5dBi 3.2dBi Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >61% >67% Polarization Measure antenna on recommended PC/ABS housing through OTA chamber Linear Input Impedance Measure antenna on recommended PC/ABS housing through VNA E5071C 50 Ohms 5.2 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 100mm (1461850100) DESCRIPTION TEST CONDITION REQUIREMENTS Frequency Range 0.824GHz~2.7GHz 824MHz~960MHz 1.71GHz~2.7GHz Return Loss Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm 1.13mm diameter micro coaxial cable Measured by VNA5071C < -4 dB < -4 dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 1.4 dBi 3 dBi Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >60% >65% Polarization Measure antenna on recommended PC/ABS housing through OTA chamber Linear Input Impedance Measure antenna on recommended PC/ABS housing through VNA E5071C 50 Ohms REVISION: ECR/ECN INFORMATION: TITLE: B EC No: 726689 SHEET No. Cellular Quad Band Flex Antenna DATE: 2022/10/31 DOCUMENT NUMBER: PS-146185-100 3 of 8 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Colin. Xu Stary.Song Welson Tan TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.3 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 150mm (1461850150) DESCRIPTION TEST CONDITION REQUIREMENTS Frequency Range 0.824GHz~2.7GHz 824MHz~960MHz 1.71GHz~2.7GHz Return Loss Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm 1.13mm diameter micro coaxial cable Measured by VNA5071C < -4 dB < -4 dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 1.3 dBi 2.8 dBi Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >58% >62% Polarization Measure antenna on recommended PC/ABS housing through OTA chamber Linear Measure antenna on Input Impedance recommended PC/ABS housing through VNA E5071C 50 Ohms 5.4 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 200mm (1461850200) DESCRIPTION TEST CONDITION REQUIREMENTS Frequency Range 0.824GHz~2.7GHz 824MHz~960MHz 1.71GHz~2.7GHz Return Loss Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm 1.13mm diameter micro coaxial cable Measured by VNA5071C < -4 dB < -4 dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 1.2dBi 2.7dBi Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >57% >60% Polarization Measure antenna on recommended PC/ABS housing through OTA chamber Measure antenna on Input Impedance recommended PC/ABS housing through VNA E5071C Linear 50 Ohms REVISION: ECR/ECN INFORMATION: TITLE: B EC No: 726689 SHEET No. Cellular Quad Band Flex Antenna DATE: 2022/10/31 DOCUMENT NUMBER: PS-146185-100 4 of 8 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Colin. Xu Stary.Song Welson Tan TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.5 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 250mm (1461850250) DESCRIPTION TEST CONDITION REQUIREMENTS Frequency Range 0.824GHz~2.7GHz 824MHz~960MHz 1.71GHz~2.7GHz Return Loss Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm 1.13mm diameter micro coaxial cable Measured by VNA5071C < -4 dB < -4 dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 1dBi 2.5dBi Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >56% >58% Polarization Measure antenna on recommended PC/ABS housing through OTA chamber Linear Measure antenna on Input Impedance recommended PC/ABS housing through VNA E5071C 50 Ohms 5.6 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 300mm (1461850300) DESCRIPTION TEST CONDITION REQUIREMENTS Frequency Range 0.824GHz~2.7GHz 824MHz~960MHz 1.71GHz~2.7GHz Return Loss Antenna loaded on PC/ABS housing (thickness 1mm) with 100mm 1.13mm diameter micro coaxial cable Measured by VNA5071C < -4 dB < -4 dB Peak Gain Measure antenna on recommended PC/ABS housing through OTA chamber 0.9dBi 2.3dBi Total Efficiency Measure antenna on recommended PC/ABS housing through OTA chamber >55% >56% Polarization Measure antenna on recommended PC/ABS housing through OTA chamber Measure antenna on Input Impedance recommended PC/ABS housing through VNA E5071C Linear 50 Ohms REVISION: ECR/ECN INFORMATION: TITLE: B EC No: 726689 SHEET No. Cellular Quad Band Flex Antenna DATE: 2022/10/31 DOCUMENT NUMBER: PS-146185-100 5 of 8 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Colin. Xu Stary.Song Welson Tan TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.7 CABLE LOSS ITEM DESCRIPTION TEST CONDITION 5.7.1 Frequency Range 824MHz~6GHz 824MHz~960 MHz 1.7GHz~2.7 GHz 3GHz~5GHz 5GHz~6GHz Attenuation 1m cable measured by VNA5071C ≤1.8dB/m ≤3.5dB/m ≤4dB/m ≤5dB/m 5.7.2 REQUIREMENT 5.8 CABLE LENGTH AFFECT THE ANTENNA PERFORMANCE Balance antenna resonance is insensitive by cable’s length, but the cable’s loss will affect the total Efficiency. Refer to 5.7 5.9 MECHANICAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT 5.9.1 Pull test Test machine : Max intelligent load tester Stick the flex antenna in a PC block, pull cable in horizontal direction Pull force >8 N 5.10 ENVIRONMENTAL REQUIREMENTS ITEM 5.10.1 5.10.2 DESCRIPTION TEST CONDITION REQUIREMENT Temperature /Humidity cycling Test condition: 1) The device under test is kept for 30 mins in an environment with a temperature of -40 ℃. 2) Kept for 4 Hours in an environment with a temperature of 85 degrees and a 1) Parts should meet RF spec relative humidity of 95%. before and after test. 3) Kept for 2 Hours in an environment with 2） No cosmetic problem a temperature of 125 degrees and a relative humidity of 95%. 4) The cycle is repeated until a total of 40 cycles have been completed. Hereafter the conditions are stabilized at room temperature. Temperature Shock Test condition: The device under test at -40 ℃⇔125 ℃ by 100 1) Parts should meet RF spec cycles, Dwell of 30 mins, transition time between before and after test. Dwell 30 secs (~ 61 mins / cycle ) and each item 2） No cosmetic problem should be measured after exposing them in normal temperature and humidity for 24 h. REVISION: ECR/ECN INFORMATION: TITLE: B EC No: 726689 SHEET No. Cellular Quad Band Flex Antenna DATE: 2022/10/31 DOCUMENT NUMBER: PS-146185-100 6 of 8 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Colin. Xu Stary.Song Welson Tan TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.10.3 5.10.4 High Temperature Salt mist test Test condition: 1) Temperature:125℃, time:1008hours 1) Parts should meet RF spec 2) There is no substantial obstruction to before and after test. air flow across and around the samples, and the samples are not touching each 2) No cosmetic problem other 1.Test condition: The device under test is exposed to a spray of a 5% (by volume) resolution of NaCL in water for 2 1) Parts should meet RF spec hours. Thereafter the device under test is left for before and after test. 1 week in room temperature at a relative 2) No visible corrosion, humidity of 95%. The cycle is repeated until a discoloration accept. total of 2 cycles have been completed. Here after the conditions are stabilized at room temperature. The meaning of text “No Cosmetic Problem” in the table above is: a. No soldering problem b. No adhesion problem of glue c. Cable & connector assembly orientation rotates 20°Max 6.0 TEST GROUPINGS Test Item Description 5.9.1 Group1 Pull test Group2 Group3 Group4 Group5 X 5.10.1 Temperature /Humidity cycling 5.10.2 Temperature Shock 5.10.3 High Temperature 5.10.4 Salt mist test Sample Quantity X X X X 5 5 5 5 5 7.0 PACKAGING Refer to Molex packaging drawing of 1461850100 REVISION: ECR/ECN INFORMATION: TITLE: B EC No: 726689 SHEET No. Cellular Quad Band Flex Antenna DATE: 2022/10/31 DOCUMENT NUMBER: PS-146185-100 7 of 8 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Colin. Xu Stary.Song Welson Tan TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 8.0 CHANGE HISTORY REV DATA DESCRIPTION B 2022/10/31 Update the efficiency and gain values of Part 5 to be consistent with AS. REVISION: ECR/ECN INFORMATION: TITLE: B EC No: 726689 SHEET No. Cellular Quad Band Flex Antenna DATE: 2022/10/31 DOCUMENT NUMBER: PS-146185-100 8 of 8 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Colin. Xu Stary.Song Welson Tan TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC