146187-0050

PRODUCT SPECIFICATION TITLE WIFI 6E PCB CABLED BALANCED ANTENNA TABLE OF CONTENTS 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 3.0 GENERAL SPECIFICATION 4.0 PRODUCT STRUCTURE INFORMATION 5.0 APPLICABLE DOCUMENTS 6.0 ANTENNA SPECIFICATION 7.0 MECHANICAL SPECIFICATION 8.0 ENVIRONMENTAL SPECIFICATION 9.0 PACKING 10. 0 CHANGE HISTORY REVISION: ECR/ECN INFORMATION: F EC No: 726689 DATE: 2022/10/31 DOCUMENT NUMBER: PS-1461870100 TITLE: WIFI 6E PCB CABLE Balanced Antenna Product Specification SHEET No. 1 of 10 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Kang Cheng Cooper Zhou Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION WIFI 6E PCB CABLED BALANCED ANTENNA 1.0 SCOPE This Product Specification covers the mechanical, electrical and environmental performances specification for WIFI 6E PCB cabled balance antenna. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: WiFi 6E PCB Cabled Balanced Antenna Series Number: 146187 2.2 DESCRIPTION Series 146187 is a balanced, dipole-type, high efficiency antenna for applications, including WiFi 6E, Bluetooth, Zigbee and others. This antenna is made from poly PCB material with small size. 2.3 FEATURES  2400~2500MHz,5150~5850MHz, 5925~7125MHz, Linear polarization  Ground plane independent, balanced dual band antenna  PCB size 40.95 x 9 x 0.7mm (not contain solder area)  MHF-I (U.FL compatible) connector  Cable OD1.13mm, 6 standard length options (50/100/150/200/250/300mm)  Cable and connector can be customized MODULE 3D VIEW REVISION: ECR/ECN INFORMATION: F EC No: 726689 DATE: 2022/10/31 DOCUMENT NUMBER: PS-1461870100 TITLE: WIFI 6E PCB CABLE Balanced Antenna Product Specification SHEET No. 2 of 10 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Kang Cheng Cooper Zhou Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 3.0 GENERAL SPECIFICATION Product name WiFi 6E PCB Cabled Balanced Antenna Part number 146187 Frequency 2.4GHz-2.5GHz 5.15GHz5.85GHz Polarization Linear Operating with matching -40℃ to 85℃ Storage with matching -40℃ to 85℃ RF Power 2 Watts Impedance with matching 50 Ohms Antenna type PCB Connector type Compatible MHF-1 & U.FL Cable diameter Ø1.13mm 5.925GHz7.125GHz 50 mm (P/N for 1461870050) 100 mm (P/N for 1461870100) 150 mm (P/N for 1461870150) Cable length 200 mm (P/N for 1461870200) 250 mm (P/N for 1461870250) 300 mm (P/N for 1461870300) REVISION: ECR/ECN INFORMATION: F EC No: 726689 DATE: 2022/10/31 DOCUMENT NUMBER: PS-1461870100 TITLE: WIFI 6E PCB CABLE Balanced Antenna Product Specification SHEET No. 3 of 10 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Kang Cheng Cooper Zhou Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 4.0 PRODUCT STRUCTURE INFORMATION P/N 146187 Mechanical Structure Information for 146187 series REVISION: ECR/ECN INFORMATION: F EC No: 726689 DATE: 2022/10/31 DOCUMENT NUMBER: PS-1461870100 TITLE: WIFI 6E PCB CABLE Balanced Antenna Product Specification SHEET No. 4 of 10 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Kang Cheng Cooper Zhou Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.0 APPLICABLE DOCUMENTS DOCUMENT NUMBER DESCRIPTION Sale Drawing (SD) SD-1461870050 Mechanical Dimension of the product Application Guide (AS) AS-1461870100 Antenna Application and surrounding Packing Drawing (PK) PK-1461870100 Product packaging specifications 6.0 ANTENNA SPECIFICATION All measurements are done of the antenna in free space with VNA Agilent E5071C and OverThe-Air (OTA) chamber. All measurements in this document are done with the part no.1461870100 with a cable length of 100mm. 6.1 ELECTRICAL REQUIREMENT 6.1.1 ELECTRICAL REQUIREMENTS FOR CABLE LENGHTH 50mm P/N 1461870050 Frequency Range 2.4GHz-2.5GHz 5.15GHz-5.85GHz 5.925GHz-7.125GHz Peak Gain (Max) 3.0dBi 4.25dBi 4.6dBi Average Total efficiency >83% >84% >75% < -10 dB < -10 dB < -5 dB Return Loss 6.1.2 ELECTRICAL REQUIREMENTS FOR CABLE LENGHTH 100mm P/N 1461870100 Frequency Range 2.4GHz-2.5GHz 5.15GHz-5.85GHz 5.925GHz-7.125GHz Peak Gain (Max) 2.8dBi 4.0dBi 4.3dBi Average Total efficiency >80% >80% >70% < -10 dB < -10 dB < -5 dB Return Loss 6.1.3 ELECTRICAL REQUIREMENTS FOR CABLE LENGHTH 150mm P/N 1461870150 Frequency Range 2.4GHz-2.5GHz 5.15GHz-5.85GHz 5.925GHz-7.125GHz Peak Gain (Max) 2.6dBi 3.7dBi 4.0dBi Average Total efficiency >77% >76% >65% < -10 dB < -10 dB < -5 dB Return Loss REVISION: ECR/ECN INFORMATION: F EC No: 726689 DATE: 2022/10/31 DOCUMENT NUMBER: PS-1461870100 TITLE: WIFI 6E PCB CABLE Balanced Antenna Product Specification SHEET No. 5 of 10 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Kang Cheng Cooper Zhou Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 6.1.4 ELECTRICAL REQUIREMENTS FOR CABLE LENGHTH 200mm P/N 1461870200 Frequency Range 2.4GHz-2.5GHz 5.15GHz-5.85GHz 5.925GHz-7.125GHz Peak Gain (Max) 2.4dBi 3.5dBi 3.7dBi Average Total efficiency >74% >72% >60% < -10 dB < -10 dB < -5 dB Return Loss 6.1.5 ELECTRICAL REQUIREMENTS FOR CABLE LENGHTH 250mm P/N 1461870250 Frequency Range 2.4GHz-2.5GHz 5.15GHz-5.85GHz 5.925GHz-7.125GHz Peak Gain (Max) 2.2dBi 3.2dBi 3.4dBi Average Total efficiency >71% >68% >55% < -10 dB < -10 dB < -5 dB Return Loss 6.1.6 ELECTRICAL REQUIREMENTS FOR CABLE LENGHTH 300mm P/N 1461870300 Frequency Range 2.4GHz-2.5GHz 5.15GHz-5.85GHz 5.925GHz-7.125GHz Peak Gain (Max) 2.0dBi 2.8dBi 3.1dBi Average Total efficiency >68% >65% >50% < -10 dB < -10 dB < -5 dB Return Loss Note that the above antenna performance is measured with just the antenna mounted on a PC/ABS block to similar a free-space condition. When implement into the system, the frequency resonant might be off-tune due to the loading of surrounding components especially metal plane. This off-tune can be compensated through matching. Although module manufacturers specify a peak gain limit, it is based on free-space conditions. The peak gain will be degraded by 1 to 2dBi in the actual implementation as the radiation pattern will change due to the surround components. As such, during selection of antenna, you can select one with high peak gain to compensate for the loss. Molex can offer assistant to choose the best location and best tuning in-order to meet this peak gain requirement. REVISION: ECR/ECN INFORMATION: F EC No: 726689 DATE: 2022/10/31 DOCUMENT NUMBER: PS-1461870100 TITLE: WIFI 6E PCB CABLE Balanced Antenna Product Specification SHEET No. 6 of 10 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Kang Cheng Cooper Zhou Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 6.2 CABLE LOSS DESCRIPTION TEST CONDITION REQUIREMENTS Frequency Range 2.4GHz/5GHz 2GHz~3GHz 5GHz~6GHz 6-7.125GHz Attenuation 1m cable measured by VNA5071C ≤3.5dB/m ≤5.5dB/m ≤6.5dB/m Balance antenna resonance is insensitive to cable’s length, but the cable’s loss will affect the total efficiency. 7.0 MECHANICAL SPECIFICATION All measurements in this document are done with the part no.1461870100 for different cable length. DESCRIPTION TEST CONDITION Pull Test 1. Test machine: Max intelligent load tester 2. Stick the PCB antenna on a plastic board, pull cable in axial direction. Pull force >8N Un-mating force (connector) Solder the receptacle connector to the test board ,then place the board and plug on push-on/pull-off machine, and repeat mating and un-mating 30 cycles at a speed 25±3mm/min. along the mating axis. Un-mating force : 0.5 kgf min REVISION: ECR/ECN INFORMATION: F EC No: 726689 DATE: 2022/10/31 DOCUMENT NUMBER: PS-1461870100 TITLE: TEST RESULT WIFI 6E PCB CABLE Balanced Antenna Product Specification SHEET No. 7 of 10 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Kang Cheng Cooper Zhou Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 8.0 ENVIRONMENTAL SPECIFICATION DESCRIPTION SPECIFICATION 1.The device under test is kept for 30 mins in an environment with a temperature of -40 ℃. 2. Kept for 4 Hours in an environment with a temperature of 85 ℃. 3. Kept for 2 Hours in an environment with a temperature of 125 ℃. Temperature /Humidity cycling 4. The cycle is repeated until a total of 40 cycles have been completed. Hereafter the conditions are stabilized at room temperature. Transfer temperature 8℃ per min. 5. Parts should meet RF spec before and after test. 6. No cosmetic problem (No soldering problem; No adhesion problem of glue.) Temperature Shock 1.The device under test at -40 ℃-125 ℃ by 100 cycles, Dwell of 30 mins, transition time between Dwell 30 secs (~ 61 mins / cycle) and each item should be measured after exposing them in normal temperature and humidity for 24 h. 2. Parts should meet RF spec before and after test. 3. No cosmetic problem（No soldering problem；No adhesion problem of glue）. 1.Temperature:125℃, time:1008 hours High Temperature 2.There is no substantial obstruction to air flow across and around the samples, and the samples are not touching each other 3. Parts should meet RF spec before and after test. 4. No cosmetic problem（No soldering problem；No adhesion problem of glue）. Salt mist test 1. The device under test is exposed to a spray of a 5% (by volume) resolution of NACL in water for 2 hours. Thereafter the device under test is left for 1 week in room temperature at a relative humidity of 95%. The cycle is repeated until a total of 2 cycles have been completed. Here after the conditions are stabilized at room temperature. 2. Parts should meet RF spec before and after test. 3. No visible corrosion. Discoloration accept. REVISION: ECR/ECN INFORMATION: F EC No: 726689 DATE: 2022/10/31 DOCUMENT NUMBER: PS-1461870100 TITLE: WIFI 6E PCB CABLE Balanced Antenna Product Specification SHEET No. 8 of 10 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Kang Cheng Cooper Zhou Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 9.0 PACKING PACKAGING INFORMATION FOR 146187 Series REVISION: ECR/ECN INFORMATION: F EC No: 726689 DATE: 2022/10/31 DOCUMENT NUMBER: PS-1461870100 TITLE: WIFI 6E PCB CABLE Balanced Antenna Product Specification SHEET No. 9 of 10 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Kang Cheng Cooper Zhou Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 10.0 CHANGE HISTORY CHANGE HISTORY REV DATA DESCRIPTION E 2020/05/27 Add 6-7.125GHz band F 2022/10/31 Update the efficiency and gain values of Part 6.1 to be consistent with AS. REVISION: ECR/ECN INFORMATION: F EC No: 726689 DATE: 2022/10/31 DOCUMENT NUMBER: PS-1461870100 TITLE: WIFI 6E PCB CABLE Balanced Antenna Product Specification SHEET No. 10 of 10 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Kang Cheng Cooper Zhou Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC