1462200300

PRODUCT SPECIFICATION TITLE GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna TABLE OF CONTENTS 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS 4.0 RATINGS 5.0 PERFORMANCE 6.0 TEST GROUPINGS 7.0 PACKING REVISION: ECR/ECN INFORMATION: TITLE: B EC No: ABU2016-0062 DATE: 2016-02-22 DOCUMENT NUMBER: PS-146220-0100 SHEET No. GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna 1 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Zlrao 2016-02-22 Chris Yu 2016-02-22 Welson Tan 2016-02-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna 1.0 SCOPE This Product Specification covers the mechanical, electrical and environmental performances requirements and test methods for GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna 1462200100 2.2 Design and Construction Antenna shall be of the design, construction and physical dimensions specified on the applicable sales drawing. 2.3 Materials a) PCB: Refer to respective Molex sales or engineering drawings b) Plating: Refer to respective Molex sales or engineering drawings c) Cable Line: Refer to respective Molex sales or engineering drawings d) Connector: Refer to respective Molex sales or engineering drawings 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See drawings and other sections of this specification for the relevant reference documents. In cases where the specification differs from the drawings, the drawings take precedence. 4.0 RATINGS 4.1 RF POWER 2 WATTS 4.2 TEMPERATU Operating: Storage : - 30°C to + 85°C - 40°C to + 95°C 4.3 HUMIDITY Operating : -30℃to+85℃ -30℃to+50℃, 85%RH or less +50℃to+85℃, 60%RH or less Storage : -40℃to+95℃ -40℃to+50℃, 85%RH or less +50℃to+95℃, 60%RH or less REVISION: ECR/ECN INFORMATION: TITLE: B EC No: ABU2016-0062 DATE: 2016-02-22 DOCUMENT NUMBER: PS-146220-0100 SHEET No. GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna 2 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Zlrao 2016-02-22 Chris Yu 2016-02-22 Welson Tan 2016-02-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.0 PERFORMANCE 5.1 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 50mm (1462200050) DESCRIPTION TEST CONDITION Frequency Range 1575.42MHz~1602MHz / 2.4GHz~6GHz Return Loss REQUIREMENTS 1575.42 MHz1602 MHz 2.4GHz~2.5GHz Antenna with 100mm long, 1.13mm diameter micro coaxial cable in free space. Measured by VNA5071C 5.15GHz~5.85 GHz 3GHz~6GHz < -8 dB Peak Gain Measure antenna in free space through OTA chamber 2.6 dBi 3.1 dBi 4.1 dBi 3.8 dBi Total Efficiency Measure antenna in free space through OTA chamber >84% >82% >88% >82% Polarization Measure antenna in free space through OTA chamber Linear Input Impedance Measure antenna in free space through VNA E5071C 50 Ohms 5.2 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 100mm (1462200100) DESCRIPTION TEST CONDITION Frequency Range 1575.42MHz~1602MHz / 2.4GHz~6GHz Return Loss REQUIREMENTS 1575.42 MHz1602 MHz 2.4GHz~2.5GHz Antenna with 100mm long, 1.13mm diameter micro coaxial cable in free space. Measured by VNA5071C 5.15GHz~5.85G Hz 3GHz~6GHz < -8 dB Peak Gain Measure antenna in free space through OTA chamber 2.4 dBi 2.9 dBi 3.8 dBi 3.5 dBi Total Efficiency Measure antenna in free space through OTA chamber >82% >80% >83% >78% Polarization Measure antenna in free space through OTA chamber Linear Input Impedance Measure antenna in free space through VNA E5071C 50 Ohms 5.3 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 150mm (1462200150) DESCRIPTION TEST CONDITION Frequency Range 1575.42MHz~1602MHz / 2.4GHz~6GHz REQUIREMENTS 1575.42 MHz1602 MHz 2.4GHz~2.5GHz 5.15GHz~5.85 GHz 3GHz~6GHz REVISION: ECR/ECN INFORMATION: TITLE: B EC No: ABU2016-0062 DATE: 2016-02-22 DOCUMENT NUMBER: PS-146220-0100 SHEET No. GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna 3 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Zlrao 2016-02-22 Chris Yu 2016-02-22 Welson Tan 2016-02-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION Return Loss Antenna with 100mm long, 1.13mm diameter micro coaxial cable in free space. Measured by VNA5071C < -8 dB Peak Gain Measure antenna in free space through OTA chamber 2.3 dBi 2.8 dBi 3.6 dBi 3.3 dBi Total Efficiency Measure antenna in free space through OTA chamber >79% >77% >78% >73% Polarization Measure antenna in free space through OTA chamber Linear Input Impedance Measure antenna in free space through VNA E5071C 50 Ohms 5.4 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 200mm (1462200200) DESCRIPTION TEST CONDITION Frequency Range 1575.42MHz~1602MHz / 2.4GHz~6GHz Return Loss REQUIREMENTS 1575.42 MHz1602 MHz 2.4GHz~2.5GHz Antenna with 100mm long, 1.13mm diameter micro coaxial cable in free space. Measured by VNA5071C 5.15GHz~5.85 GHz 3GHz~6GHz < -8 dB Peak Gain Measure antenna in free space through OTA chamber 2.1 dBi 2.6 dBi 3.3 dBi 3 dBi Total Efficiency Measure antenna in free space through OTA chamber >76% >74% >73% >69% Polarization Measure antenna in free space through OTA chamber Linear Input Impedance Measure antenna in free space through VNA E5071C 50 Ohms 5.5 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 250mm (1462200250) DESCRIPTION TEST CONDITION Frequency Range 1575.42MHz~1602MHz / 2.4GHz~6GHz Return Loss Peak Gain REQUIREMENTS 1575.42 MHz1602 MHz 2.4GHz~2.5GHz Antenna with 100mm long, 1.13mm diameter micro coaxial cable in free space. Measured by VNA5071C 5.15GHz~5.85 GHz 3GHz~6GHz < -8 dB Measure antenna in free space through OTA chamber 2 dBi 2.5 dBi 3.1 dBi 2.8 dBi REVISION: ECR/ECN INFORMATION: TITLE: B EC No: ABU2016-0062 DATE: 2016-02-22 DOCUMENT NUMBER: PS-146220-0100 SHEET No. GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna 4 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Zlrao 2016-02-22 Chris Yu 2016-02-22 Welson Tan 2016-02-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION Total Efficiency Measure antenna in free space through OTA chamber Polarization Measure antenna in free space through OTA chamber Linear Input Impedance Measure antenna in free space through VNA E5071C 50 Ohms >73% >71% >69% >65% 5.6 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 300mm (1462200300) DESCRIPTION TEST CONDITION REQUIREMENTS Frequency Range 1575.42MHz~1602MHz / 2.4GHz~6GHz 1575.42 MHz1602 MHz 2.4GHz~2.5GHz 5.15GHz~5.85 GHz 3GHz~6GHz Return Loss Antenna with 100mm long, 1.13mm diameter micro coaxial cable in free space. Measured by VNA5071C Peak Gain Measure antenna in free space through OTA chamber 1.8 dBi 2.3 dBi 2.8 dBi 2.5 dBi Total Efficiency Measure antenna in free space through OTA chamber >70% >68% >65% >61% Polarization Measure antenna in free space through OTA chamber Linear Input Impedance Measure antenna in free space through VNA E5071C 50 Ohms < -8 dB 5.7 CABLE LOSS ITEM DESCRIPTION 5.7.1 Frequency Range 5.7.2 Attenuation TEST CONDITION 1.5 GHz~6GHz 1m cable. Measured by VNA5071C REQUIREMENTS 1.5GHz~3GHz 3GHz~5GHz 5GHz~6.0GHz ≤3dB/m ≤4dB/m ≤5dB/m 5.8 CABLE LENGTH AFFECT THE ANTENNA PERFORMANCE Balance antenna resonance is insensitive by cable’s length, but the cable’s loss will affect the total efficiency. Refer to 5.7 REVISION: ECR/ECN INFORMATION: TITLE: B EC No: ABU2016-0062 DATE: 2016-02-22 DOCUMENT NUMBER: PS-146220-0100 SHEET No. GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna 5 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Zlrao 2016-02-22 Chris Yu 2016-02-22 Welson Tan 2016-02-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.9 MECHANICAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT 5.9.1 Pull test Test machine :Max intelligent load tester Stick the antenna in a PC block, pull cable in horizontal direction Pull force >18N 5.10 RELIABILITY REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT 5.10.1 Cross section Cross section on pad soldering area. Check under microscope No soldering problem 5.11 ENVIRONMENTAL REQUIREMENTS ITEM 5.11.1 5.11.2 5.11.3 DESCRIPTION TEST CONDITION REQUIREMENT Temperature /Humidity cycling Test condition: 1) The device under test is kept for 30 mins in an environment with a temperature of -40 ℃. 2) Kept for 4 Hours in an environment with a temperature of 85 degrees and a relative 1) Parts should meet RF humidity of 95%. spec before and after test. 3) Kept for 2 Hours in an environment with a 2） No cosmetic problem temperature of 125 degrees and a relative humidity of 95%. 4) The cycle is repeated until a total of 40 cycles have been completed. Hereafter the conditions are stabilized at room temperature. Temperature Shock Test condition: 1) The device under test at -40 ℃⇔125 ℃ by 100 cycles, Dwell of 30 mins, transition time 1) Parts should meet RF between Dwell 30 secs (~ 61 mins / cycle ) spec before and after test. and each item should be measured after 2） No cosmetic problem exposing them in normal temperature and humidity for 24 h. High Temperature Test condition: 1) Temperature:125℃, time:1008hours 1) Parts should meet RF 2) There is no substantial obstruction to air spec before and after test. flow across and around the samples, and the 2) No cosmetic problem samples are not touching each other REVISION: ECR/ECN INFORMATION: TITLE: B EC No: ABU2016-0062 DATE: 2016-02-22 DOCUMENT NUMBER: PS-146220-0100 SHEET No. GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna 6 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Zlrao 2016-02-22 Chris Yu 2016-02-22 Welson Tan 2016-02-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5.11.4 Test condition: 1) The device under test is exposed to a spray of a 5% (by volume) resolution of Nacl in water for 2 hours. Thereafter the device under test is left for 1 week in room temperature at a relative humidity of 95%. The cycle is repeated until a total of 2 cycles have been completed. Here after the conditions are stabilized at room temperature. Salt mist test 1) Parts should meet RF spec before and after test. 2) No visible corrosion. Discoloration accept. The meaning of text “No Cosmetic Problem” in the table above is: a. no soldering problem b. no adhesion problem of glue c. no peel off of plating 6.0 TEST GROUPINGS Test Item Description Group1 5.9.1 Pull test X 5.10.1 Cross section 5.11.1 Temperature /Humidity cycling 5.11.2 Temperature Shock 5.11.3 High Temperature 5.11.4 Salt mist test Group2 Group3 Group4 Group5 Group6 X X X X X Sample Quantity 5 5 5 5 5 5 7.0 PACKAGING Refer to the Molex related packaging drawings. REVISION: ECR/ECN INFORMATION: TITLE: B EC No: ABU2016-0062 DATE: 2016-02-22 DOCUMENT NUMBER: PS-146220-0100 SHEET No. GPS/WiFi (2.4/5GHz) Combo Balance PCB Antenna 7 of 7 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Zlrao 2016-02-22 Chris Yu 2016-02-22 Welson Tan 2016-02-22 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC