1511193504

B±0.38 0.65 1.27 A Ø0.85 0.635 1.27 Recommended PCB Layout Ø0.7±0.10mm C±0.20 BD095 XX X XX XXXX XXXX A XX 2 14 7.62 8.89 6.35 16 8.89 10.16 7.62 18 10.16 11.43 8.89 20 11.43 12.70 10.16 15.24 16.51 13.97 28 16.51 17.78 15.24 30 17.78 19.05 16.51 32 19.05 20.32 17.78 34 20.32 21.59 19.05 36 21.59 22.86 20.32 38 22.86 24.13 21.59 40 24.13 25.40 22.86 42 25.40 26.67 24.13 44 26.67 27.94 25.40 46 27.94 29.21 26.67 48 29.21 30.48 27.94 50 30.48 31.75 29.21 52 31.75 33.02 30.48 54 33.02 34.29 31.75 56 34.29 35.56 33.02 58 35.56 36.83 34.29 60 36.83 38.10 35.56 62 38.10 39.37 36.83 64 39.37 40.64 38.10 66 40.64 41.91 39.37 D±0.2 2.76 Soldering Process: IR Reflow: 260°C for 10 sec. Wave: 250°C for 5-10 sec Manual Solder: 350°C for 3-5 sec Mates with (Subject to pin length) BD050 BD055 BD060 BD065 BD091 BD092 BD064 Maximum Table Insulator Height H OL Max (mm) Dim D Max (mm) A=1.50mm K=1.00mm B=2.00mm L=2.50mm F=3.00mm 10.00 10.00 15.00 15.00 15.00 8.00 6.00 10.00 10.00 10.00 or specify Custom Footprint Width e.g. 2.50mm = 0250 (Tooling charge may apply) Part Number Product Description BD095 1.27mm Pitch Pin Header,Dual Row, Surface Mount, Vertical Drawing Date 28th December 2007 By Detail 4 5.08 26 Dimension F (1/100mm) (Width of Footprint) 0570 = 5.70mm (Standard) 3 7.62 Material Insulator Material: Polymer,LCP, UL 94V-0 Contact Terminal: Copper Alloy (Minimum 0100 = 1.00mm) (Maximum - See Table) 1 6.35 1.27 Request Samples and Quotation or specify Custom Post Height eg 2.50mm = 0250 3.81 12 11.43 F±0.2 or specify Custom PCB to Insulator dimension eg. 2.50mm = 0250 (Minimum 0050 = 0.50mm) 6.35 12.70 Electrical Current Rating: 1A per pin Contact Resistance: 20 mΩ max. Insulating Resistance: 1000 MΩ min. Dielectric Withstand Voltage: 300V AC Dimension E (1/100mm) (PCB to Insulator) 0070 = 0.70mm (Standard) 5.08 13.97 Insulator Material L = LCP (Insulator H = A, B, L, F) N = Nylon 6T (Insulator H = K) Insulator Height "H" A = 1.50mm (Standard) Locating Peg K = 1.00mm 0 = Without B = 2.00mm 1 = With L = 2.50mm F = 3.00mm Dimension D (1/100mm) (Post Height) 0200 = 2.00mm (Standard) 0350 = 3.50mm (Standard) 2.54 10 15.24 Packing Options B = Tape and Reel with Cap (Standard) D = Tube (not available in 6, 8 & 10 Contacts) E = Tube with Cap (not available in 6, 8 & 10 Contacts) G = Plastic Box (only available in 6, 8 & 10 Contacts) Contact Plating A = Gold Flash All Over (Standard) B = Selective Gold Flash Contact Area/Tin On Tail C = Tin All Over G = 10µ" Gold Contact Area/Tin On Tail H = 15µ Gold Contact Area/Tin On Tail I = 30µ" Gold Contact Area/Tin On Tail B XXXX 1.27 5.08 12.70 Mechanical & Environmental Operating Temperature: -40°C to +105°C No. of Contacts 06 to 66 3.81 3.81 13.97 Ordering Grid C 2.54 24 Plating See Ordering Grid E±0.2 0.4 Sq. Pin D 6 8 22 1.50 H E C Specifications H OL (See Table) 5.00 B 4.20 Solder Area F Dimension Number of Contacts 1.27 G F + 1.0 3.4±0.1 A±0.25 1.50 H Revision Date 5 CC Tolerances (Except as Noted) BD095 I PCN I4 11/01/23 X.° ± 5° X. ± 0.30 X.X° ± 2° X.X ± 0.20 X.XX ± 0.15 X.XX° ± 1° X.XXX ± 0.10 X.XXX° ± 0.5° Length Angle 6 Units: Metric (mm) C 3rd Angle Projection 7 This drawing is confidential and copyright of Global Connector Technology, Ltd (GCT). This drawing must not be copied or disclosed without written consent. E & OE www.gct.co Not to Scale Drawn By LYH 8 Sheet No. 1/1