15166-0436

PRODUCT SPECIFICATION PRODUCT SPECIFICATION OF THE 0.50MM CENTER FFC JUMPER CABLE (EXTRA FLEXIBLE) Revision List REVISION A B MODIFICATION First Release Margin updated from 0.50 + 0.15/-0.096mm to 0.50 +/- 0.12mm Span updated from 0.50 (N-1) +/- 0.10mm to 0.50 (N1) +/- 0.07mm REVISION: ECR/ECN INFORMATION: TITLE: A EC No: DATE: 2019/04/04 DOCUMENT NUMBER: PS-15166-001 SHEETS 1-5 2 DATE 2011/11/01 2019/04/04 PRODUCT SPECIFICATION 0.50MM CENTER FFC JUMPER CABLE (HIGH TEMPERATURE) SHEET No. 1 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: M. SHANNON D.ENGLISH S.FULTON TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 1 SCOPE This specification covers the 0.50mm center FFC (Flat Flexible Cable) jumper cable, high temperature style, using tin plated copper conductor. 2 PRODUCT DESCRIPTION 2.1 Product name and series number Product name: 0.50MM CENTER FFC JUMPER CABLE (EXTRA FLEXIBLE) Product material no: 15166-XXXX 2.2 Dimensions, materials and markings Product dimensions according SD-15166-001. Number of conductors ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ N: 6 to 80 Pitch ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ P: 0.50  0.05mm Span ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ E: 0.50 (N-I)  0.07mm Total width ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ W: 0.50 (N+I)  0.10mm Margin width ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ M: 0.50 ± 0.12mm Strip length ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙S: 2.00 to 10.00  0.80mm End thickness of the connection area ∙∙ Tc: 0.30  0.05mm Thickness of the insulated area ∙∙∙∙∙∙∙∙∙∙∙∙∙ Ti: 0.12  0.05mm Insulated length ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙L: 20 to 60mm  2.00mm 61 to 100mm  3.00mm 101 to 200mm  4.00mm 201 to 3999mm  5.00mm 4000 to 5999mm  10.00mm 6000 to 9999mm  15.00mm Reinforcement length ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ F: 6.00 to 20.00  2.00mm End squareness ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ s-s’: 0.30mm max. S1' S2' P S1 Tc S2 L Ti F1 E W M F2 TYPE A REVISION: ECR/ECN INFORMATION: TITLE: A EC No: DATE: 2019/04/04 DOCUMENT NUMBER: PS-15166-001 PRODUCT SPECIFICATION 0.50MM CENTER FFC JUMPER CABLE (HIGH TEMPERATURE) SHEET No. 2 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: M. SHANNON D.ENGLISH S.FULTON TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 2.3 COMPOSITION  Conductor: Material: Thickness: Tin plated copper conductor 0.035mm nominal  Insulation tape: Material: Thickness: Color: Polyester + Flame retardant adhesive 0.043mm nominal white  Reinforcement tape:Material: Thickness: Color: Polyester + Adhesive 0.226mm nominal Blue 2.4 Safety agency approvals Not applicable. 3 RATINGS 3.1 Current and applicable conductors Cross section 0.01mm² Amps 0.5 3.2 Temperature Operating temperature: -40°C to +105°C REVISION: ECR/ECN INFORMATION: TITLE: A EC No: DATE: 2019/04/04 DOCUMENT NUMBER: PS-15166-001 PRODUCT SPECIFICATION 0.50MM CENTER FFC JUMPER CABLE (HIGH TEMPERATURE) SHEET No. 3 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: M. SHANNON D.ENGLISH S.FULTON TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 4 PERFORMANCE 4.1 Electrical requirements ITEM DESCRIPTION TEST CONDITION 3 4 Conductor resistance Insulation resistance cond. to cond. Dielectric test Continuity test 5 Voltage rating 6 Current rating 1 2 REQUIREMENT --- 1730 ohms/km MAXIMUM 500 V DC 10 Mohms/km MINIMUM 200 V AC for 1 minute 3.0 V DC at 0.1mA No disruptive discharge passed 60 V AC MAXIMUM at 23°C increase in 10°C at the surface (all conductors under load) 0.5 A MIN 4.2 Physical requirements ITEM DESCRIPTION TEST CONDITION 7 Temperature rating 8 Heat resistance 9 Thermal shock 10 Cold coiling 11 Wear by abrasion 12 Folding 13 Moisture resistance 14 Flame resistance 15 Solderability REVISION: ECR/ECN INFORMATION: TITLE: A EC No: DATE: 2019/04/04 DOCUMENT NUMBER: PS-15166-001 REQUIREMENT -40°C to +105°C Insulation resistance Dielelectric test 168 hours at 136°C 30 minutes at –55°C 5 minutes at +25°C 30 minutes at +85°C 5 minutes at +25°C 96 hours at –40°C / The sample will be wound on a 3mm dia. Mandrel Test following EN3475-503 Weight: 500g Speed: 60 cycles/min Abrasion tool: 0.13mm dia. The specimen shall be folded manually (Bending angle: 180° / Radius: 4mm) 96 hours at 60°C, 95% RH UL 758 VW-1 Immersion of the area which is intended for soldering into a tin bath at 250 ± 10°C During 30 seconds Insulation resistance after 25 cycles Insulation resistance Dielectric test Visual inspection 10000 cycles (standard) 1000 cycles (shielded) MINIMUM 20 times MINIMUM Insulation resistance Dielectric test Passed No delamination Solder reflow below 1 mm PRODUCT SPECIFICATION 0.50MM CENTER FFC JUMPER CABLE (HIGH TEMPERATURE) SHEET No. 4 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: M. SHANNON D.ENGLISH S.FULTON TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC PRODUCT SPECIFICATION 5 PACKAGING According to MOLEX packaging specification: PK-15166-001 6 UL APPROVAL These products are UL compliant under: UL style 20706 Temperature rating: 105°C Voltage rating: 60 V AC 7 ROHS COMPLIANCE Cable construction is RoHS compliant. This includes base FFC, shielded FFC and painted shielded FFC. REVISION: ECR/ECN INFORMATION: TITLE: A EC No: DATE: 2019/04/04 DOCUMENT NUMBER: PS-15166-001 PRODUCT SPECIFICATION 0.50MM CENTER FFC JUMPER CABLE (HIGH TEMPERATURE) SHEET No. 5 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: M. SHANNON D.ENGLISH S.FULTON TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC