1600783025

18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 TABLE OF CONTENTS L SHEET NO. 1 2 3 4 SHEET DESCRIPTION NOTES AND BOM CONFIGURATIONS KEY CONFIGURATIONS RECEPTACLE CONNECTOR ASSEMBLY MATING INTERFACE/CONNECTOR DRAWINGS PACKAGING NOTES: VALID UNLESS OTHERWISE SPECIFIED DESCRIPTION 10 WAY HYBRID (1.5/2.8) 8 WAY HYBRID (1.5/6.3) 9 WAY HYBRID (1.5/2.8/6.3) 1. GENERAL: a. APPLICATION SPECIFICATION SEE: 1601110001-AS -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH DEVICE OR CONNECTOR AS SPECIFIED IN THE MATING INTERFACE/CONNECTOR DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESED AT http://ewcap.uscarteams.org/. -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION (SEE PLR PRE-LOCK VIEW SHEET 4). K DRAWING NO. PK-31300-903 PK-31300-903 PK-31300-903 DESCRIPTION 10 WAY HYBRID (1.5/2.8) 8 WAY HYBRID (1.5/6.3) 9 WAY HYBRID (1.5/2.8/6.3) L MOLEX INLINE SD-160077-0001 SD-160077-0001 SD-160077-0001 INTERFACE DEFINITION 999-S-010-2-Z01 999-S-008-2-Z01 999-S-009-2-Z01 K b. PRODUCT SPECIFICATION SEE: 1600760001-PS CONTAINS: SCOPE, PRODUCT DESCRIPTION, INTEGRAL COMPONENTS AND ACCESSORIES, APPLICABLE DOCUMENTS AND SPECIFICATIONS, RATINGS, PERFORMANCE, PACKAGING, GAUGES AND FIXTURES, AND OTHER INFORMATION c. PACKAGING SPECIFICATION PER MOLEX DRAWING: SEE PACKAGING CHART d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-300 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) J J 2. DESIGN - MATERIALS: a. SEE BOM TABLE IN SD-160076-0002 3. DESIGN - GEOMETRY: a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART WITH THE EXCEPTION OF UNDERLINED DIMENSIONS, DIMENTIONAL INFORMATION NOT SHOWN ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B). g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. MACHINE NO. 4. YEAR FOR ADDITIONAL INFORMATION REFERENCE SECTION 5 UNDER PROCEDURES IN ES-34735-008. H G H G 160080 SERIES F F E E D A8 UPDATED VIEWS IN SHEET 5 A7 ADDED INTERFACE DRAWINGS IN SHEETS 5,6,7 A6 160078 SERIES A3 A2 UPDATED VIEWS & GENERAL NOTES UPDATED DRAWING ALONG WITH NEW MODELS MIGRATED DOCUMENT FROM HISTORY UPDATE KEYING STRATEGY UPDATE DIMENSION 3 A1 UPDATE PACKAGING DRAWINGS A RELEASE OK TO TOOL REV REV DESCRIPTION A5 A4 C INSPECTION NUMBER LOG LAST NUMBER: 5 ADDED: REMOVED: SYMBOLS B = 0 = 0 = 0 A 160076 SERIES DOCUMENT STATUS FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 RELEASE DATE 17 16 2021/04/08 19:48:42 15 14 13 12 11 10 9 8 7 mm 2:1 CURRENT REV DESC: B GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C SCALE ± = 0 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 D 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 EC NO: 660404 DRWN: ATEEGULLA CHK'D: KBORUSZEWSKI APPR: KBORUSZEWSKI INITIAL REVISION: DRWN: APROFFITT APPR: VKOSHY THIRD ANGLE PROJECTION 2021/04/08 2021/04/08 2021/04/08 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/01/29 2015/05/21 DRAWING SERIES A1-SIZE 160076 5 MX150 HYB RCPT DUAL ROW SEALED ASSY DUAL ROW SEALED ASSEMBLY MAT SEAL 4 A SD-160076-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A8 SHEET NUMBER 1 OF 7 1 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION CONFIGURATIONS L L 160080 SERIES 160078 SERIES 160076 SERIES K STANDARD K J J F G F WITH CLIPSLOT G H WITH BLOCKED CAVITIES H E D E D C C SYMBOLS B = 0 = 0 = 0 FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 17 16 2021/04/08 19:48:42 15 14 13 12 11 10 9 8 7 CURRENT REV DESC: B GENERAL TOLERANCES (UNLESS SPECIFIED) 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C 2.5:1 = 0 = 0 RELEASE DATE mm ± = 0 P1 SCALE ANGULAR TOL A DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 EC NO: 660404 DRWN: ATEEGULLA CHK'D: KBORUSZEWSKI APPR: KBORUSZEWSKI INITIAL REVISION: DRWN: APROFFITT APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING 2021/04/08 2021/04/08 2021/04/08 2015/01/29 2015/05/21 SERIES 4 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER A1-SIZE 160076 5 MX150 HYB RCPT DUAL ROW SEALED ASSY DUAL ROW SEALED ASSEMBLY MAT SEAL A SD-160076-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A8 SHEET NUMBER 2 OF 7 1 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 SHEET DESCRIPTION 2 1 CHARTED DIMENSIONS KEY CONFIGURATIONS (ALL) DIMENSIONS L M 15.82 13.82 15.82 13.82 15.82 13.82 DESCRIPTION L 8 WAY 9 WAY 40° 10 WAY 10 WAY HYBRID (1.5/2.8) 8 WAY HYBRID (1.5/6.3) 9 WAY HYBRID (1.5/2.8/6.3) 40° 40° DIM L 40° 20° L K K J J KEY A KEY A KEY A 20° 20° 20° 20° DIM M DIM L H H G G DIM L KEY B KEY B KEY B DIM L DIM L F DIM M DIM L F 40° E E KEY C KEY C KEY C D D DIM M DIM M DIM M 40° 20° DIM M C C SYMBOLS B KEY D = 0 KEY D KEY D = 0 = 0 FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 17 16 2021/04/08 19:48:42 15 14 13 12 11 10 9 8 7 CURRENT REV DESC: B GENERAL TOLERANCES (UNLESS SPECIFIED) 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C 2.5:1 = 0 = 0 RELEASE DATE mm ± = 0 P1 SCALE ANGULAR TOL A DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 EC NO: 660404 DRWN: ATEEGULLA CHK'D: KBORUSZEWSKI APPR: KBORUSZEWSKI INITIAL REVISION: DRWN: APROFFITT APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING 2021/04/08 2021/04/08 2021/04/08 2015/01/29 2015/05/21 SERIES 4 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER A1-SIZE 160076 5 MX150 HYB RCPT DUAL ROW SEALED ASSY DUAL ROW SEALED ASSEMBLY MAT SEAL A SD-160076-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A8 SHEET NUMBER 3 OF 7 1 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 CHARTED DIMENSIONS SHEET DESCRIPTION RECEPTACLE CONNECTOR ASSEMBLY DESCRIPTION A 25.56 10 WAY HYBRID (1.5/2.8) 25.56 8 WAY HYBRID (1.5/6.3) 25.56 9 WAY HYBRID (1.5/2.8/6.3) 10 WAY HYBRID (1.5/2.8) W/ CLIPSLOT 28.38 28.38 8 WAY HYBRID (1.5/6.3) W/ CLIPSLOT 9 WAY HYBRID (1.5/2.8/6.3) W/ CLIPSLOT 28.38 L B 3.50 3.50 3.50 3.50 3.50 3.50 C 47.48 47.48 47.48 47.48 47.48 47.48 D 11.25 N/A 11.25 11.25 N/A 11.25 DIMENSIONS E F N/A 50.00 13.00 50.00 13.00 50.00 N/A 50.00 13.00 50.00 13.00 50.00 G 7 7 7 7 7 7 ⌀ DIM F DIM D DIM E J 9 N/A 9 9 N/A 9 K 10 N/A N/A 10 N/A N/A TERMINAL POSITION 1 L 2 MIN PASS-THRU WITH NO CLEARANCE K LASER MARKING ON THIS SURFACE SEE NOTE 3g. H 8 8 8 8 8 8 K Y Z TERMINAL POSITION H TERMINAL POSITION G J J TERMINAL POSITION J 3 DIM A MAX H H Y 3.50 TYP Z 37.16 ±0.75 1 4X DIM B FROM CL DIM C MAX TERMINAL POSITION 1 5 G G TERMINAL POSITION G F TERMINAL POSITION H F MOLD CAVITY I.D THIS LOCATION RECYCLE CODE THIS LOCATION MANUFACTURING LOCATION CODE THIS LOCATION E TERMINAL POSITION K TERMINAL POSITION J E TERMINAL POSITION 1 TERMINAL POSITION H TERMINAL POSITION G D D C C 4 2.73 ±0.50 SYMBOLS B = 0 = 0 = 0 PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION A PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN FINAL-STAGED POSITION DOCUMENT STATUS FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 RELEASE DATE 17 16 2021/04/08 15 14 13 12 11 10 9 8 7 3:1 CURRENT REV DESC: B GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C mm ± = 0 19:48:42 SCALE ANGULAR TOL = 0 SECTION Y-Y SECTION Z-Z THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 EC NO: 660404 DRWN: ATEEGULLA CHK'D: KBORUSZEWSKI APPR: KBORUSZEWSKI INITIAL REVISION: DRWN: APROFFITT APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING 2021/04/08 2021/04/08 2021/04/08 2015/01/29 2015/05/21 SERIES 4 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER A1-SIZE 160076 5 MX150 HYB RCPT DUAL ROW SEALED ASSY DUAL ROW SEALED ASSEMBLY MAT SEAL A SD-160076-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A8 SHEET NUMBER 4 OF 7 1 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 IF HEADER IS RECESSED INTO POCKET. THESE DIMENSIONS REPRESENT THE MINIMUM CLEARANCE REQUIRED FOR THE MATING SHROUD. S S 2X 40° 24.00 MIN 24.00 MIN 11.31 MIN 15.00 MIN DATUM A SEE DETAIL 2 1.79 ±0.20 R R NO PARTING LINE AT THIS LOCATION 2X 10.16 5° R 2.00 20.50 MIN ALL AROUND FOR MATING CONNECTOR SHROUD CLEARANCE 30° 0.70 ±0.15 ALL AROUND Q Q 2X 20.20 +0.10 -0.20 KEYING OPTION A R �6.47� DATUM B DATUM B PACKAGING FRAME P P DETAIL 3 SCALE 10:1 NOTICE N 1.25 ±0.05 ⌖ 0.10Ⓜ A B 2X 20° N DATUM D THIS DRAWING OR PORTIONS OF IT, ARE CONTROLLED BY THE ELECTRICAL WIRING COMPONENTS APPLICATION PARTNERSHIP (EWCAP), A SUBGROUP OF THE UNITED STATES CONSORTIUM FOR AUTOMOTIVE RESEARCH LLC (USCAR). USCAR IS A PARTNERSHIP BETWEEN CHRYSLER GROUP LLC, FORD MOTOR COMPANY, AND GENERAL MOTORS CORPORATION ANY CHANGE TO A EWCAP CONTROLLED PORTION OF THIS DRAWING, INCLUDING A "RECORD CHANGE" MUST BE APPROVED. IN WRITING, BY THE RESPONSIBLE EWCAP MEMBER FROM EACH USCAR COMPANY. EACH EWCAP MEMBER AUTHORIZED TO SIGN FOR HIS OR HER COMPANY IS RESPONSIBLE FOR OBTAINING ALL NECESSARY APPROVALS WITHIN THAT COMPANY PRIOR TO SIGNING FOR APPROVAL OF THE CHANGE. EWCAP EXPRESSLY PROHIBITS ANY PARTY FROM CHANGING EITHER ANY EWCAP CONTROLLED PORTION OF THIS DRAWING OR ANY ASSOCIATED TOOLING BEFORE RECEIVING AN APPROVAL SIGNED BY AN AUTHORIZED REPRESENTATIVE FROM EACH EWCAP PARTNER. REFERENCE TO THE SIGNED APPROVAL FORM MUST BE ENTERD IN THIS DRAWING'S CONTROL COLUMN. 2X 18.25 MIN 2X 13.82 W 3.50 M W DETAIL 2 SCALE 10:1 2X 1.00 SEE KEYING OPTION VIEWS FOR POSITIONS 2X 15.97 +0.10 -0.20 A 3.00 ⌖ 0.20 A B 2.30 ⌖ 0.50 A B L 18.00 KEYING OPTION B A M L 3.50 B D 12.90 G DATUM B 6X �1.20� 2.90 +0.20 -0.80 K AT TANGENT ⌖ 0.30Ⓜ A B 4X 3.50 SEE DETAIL 3 REFER TO EWCAP DWG. NO. EWCAP-001, rev. K 150-T001 1.50 TERMINAL BLADE CONFIGURATION CIRCUIT #3 CIRCUIT #1 K CIRCUIT #8 2X 15.82 2X �0.805� J DATUM B 2X 3X 3.00 CIRCUIT #7 ⌖ 0.20Ⓜ A B AT BASE ⌖ 0.30Ⓜ A B AT TIP 10.50 +0.15 -0.10 REFER TO EWCAP DWG. NO. EWCAP-001, rev. D 630-T001 6.30 TERMINAL BLADE CONFIGURATION J V V 3X 6.00 10.74 +0.10 -0.20 DATUM B 6X �0.805� ⌖ 0.20Ⓜ A B AT BASE ⌖ 0.30Ⓜ A B AT TIP 1.50 ALL AROUND H G CIRCUIT #6 B 2X 13.00 CIRCUIT #4 REFER TO EWCAP DWG. NO. EWCAP-001, rev. K 150-T001 1.50 TERMINAL BLADE CONFIGURATION SURFACE MUST BE FREE OF DEFECTS AND PARTING LINES FOR SEALING SURFACE ALL AROUND 6X 9.80 +0.10 -0.25 KEYING OPTION C H 2X �6.00� ⌖ 0.30Ⓜ A B 26.00 REFER TO EWCAP DWG. NO. EWCAP-001, rev. D 630-T001 6.30 TERMINAL BLADE CONFIGURATION G 2X 6.00 +0.10 -0.25 SECTION B-B SCALE 4:1 NOTES: UNLESS OTHERWISE SPECIFIED 2X 13.82 F F 1. ALL DIMENSIONS SHOWN IN MILLIMETERS. 0.25° MAX DRAFT 2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994 3. 0.25 RADII ON ALL CORNERS SHOWN SHARP. 2X 10.74 +0.10 -0.20 DATUM G 4. UNSPECIFIED RADII: 0.25 EXCEPT AS NOTED. E E 5. STANDARD COLORS FOR POLARIZATION (SEE CHART). DEVIATION REQUIRES APPROVAL OF AUTHORIZED PERSON. 6. REFER TO "SAE/USCAR 12 CONNECTOR GUIDELINES" FOR ADDITIONAL REQUIREMENTS. KEYING OPTION D 43.45 SECTION V-V SCALE 4:1 7. EXCEPT WHERE NOTED, DRAFT ON OUTSIDE SURFACES IS PERMISSIBLE WITHIN TOLERANCE. D 2X R 642.87 ⌓ 0.15 A B 8. ⌢ 0.15 A B C 17.95 2X R 31.73 2X R 30.42 SYMBOL INDICATES DRAFT DIRECTION. 9. FOR TERMINAL MATERIAL, DIMENSIONAL, AND COATING REQUIREMENTS AND ANY BLADE TERMINAL DESIGN INFORMATION NOT SHOWN ON THIS DRAWING SEE EWCAP DRW. NO. EWCAP-001, rev. K. 1.5 PLATING: UNDERPLATING: ELECTRO-DEPOSITED NICKEL SULFAMATE 0.76-2.00 MICROMETERS TOP LAYER: ELECTRO-DEPOSITED MATTE TIN 1.00-2.50 MICROMETERS 6.3 PLATING: UNDERPLATING: ELECTRO-DEPOSITED NICKEL 1.25-2.25 MICROMETERS TOP LAYER: ELECTRO-DEPOSITED MATTE TIN 1.00-2.50 MICROMETERS 4X R 5.73 15.33 SYMBOLS = 0 = 0 2X R 4.42 40.83 B SECTION W-W AT DATUM D STONE GRAY DARK GRAY LIGHT GRAY BLACK MATING CONNECTOR A OPTION COLOR 12.THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. 24 23 P1 RELEASE DATE 22 21 2021/03/03 20 19 C 18 17 16 15 14 13 12 11 DIMENSION UNITS SCALE mm 2:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES = 0 10 CURRENT REV DESC: C GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 23:36:12 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ANGULAR TOL = 0 DOCUMENT STATUS FORMAT: master-tb-prod-E REVISION: H DATE: 2018/01/18 11. REFER TO USCAR/EWCAP PART LIST AS FOUND ON WEBSITE http://www.uscarteams.org SCALE 3:1 D C B A = 0 10. A FULL SHROUD ON THE MATING CONNECTOR IS REQUIRED TO INSURE THAT THE CONNECTOR-HEADER POLARIZATION FEATURES (OPTIONS A THRU D) WILL FUNCTION. THE FULL SHROUD ALSO PREVENTS SCOOP DAMAGE TO THE HEADER PINS. REFER TO "SAE/USCAR-12 CONNECTOR DESIGN GUIDE LINES" FOR ADDITIONAL INFORMATION. 2X R 641.56 D CONSTRUCTION BELOW THIS SURFACE IS NOT CONTROLED BY EWCAP. NO PLASTIC FEATURES MAY EXTEND ABOVE THIS SURFACE ± 1 PLACE ± 0 PLACES ± 3.0 ° 0.1 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 9 EC NO: 660404 DRWN: ATEEGULLA CHK'D: KBORUSZEWSKI APPR: KBORUSZEWSKI INITIAL REVISION: DRWN: APROFFITT APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING 2021/04/08 2021/04/08 2021/04/08 7 6 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/01/29 2015/05/21 SERIES E-SIZE 160076 8 MX150 HYB RCPT DUAL ROW SEALED ASSY DUAL ROW SEALED ASSEMBLY MAT SEAL 5 SD-160076-0001 MATERIAL NUMBER SEE NOTE 2a. 4 SHEET NUMBER CUSTOMER GENERAL MARKET 3 A8 PSD 001 2 5 OF 7 1 A 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 IF HEADER IS RECESSED INTO POCKET. THESE DIMENSIONS REPRESENT THE MINIMUM CLEARANCE REQUIRED FOR THE MATING SHROUD. S S 24.00 MIN NO PARTING LINE AT THIS LOCATION 15.00 MIN 24.00 MIN 11.30 MIN DATUM A 20° 1.79 ±0.20 40° R SEE DETAIL 4 13.80 R 2.00 5° 30° R 20.50 MIN ALL AROUND FOR MATING CONNECTOR SHROUD CLEARANCE 0.70 ±0.15 10.20 15.97 +0.10 -0.20 Q Q R �6.47� 20.20 +0.10 -0.20 KEYING OPTION A DATUM B DATUM B PACKAGING FRAME 1.25 ±0.05 ⌖ 0.10Ⓜ A B P P DETAIL 5 SCALE 10:1 20° 15.82 NOTICE N N 13.82 DETAIL 4 SCALE 10:1 SEE KEYING OPTION VIEWS FOR POSITIONS 10.74 +0.10 -0.20 THIS DRAWING OR PORTIONS OF IT, ARE CONTROLLED BY THE ELECTRICAL WIRING COMPONENTS APPLICATION PARTNERSHIP (EWCAP), A SUBGROUP OF THE UNITED STATES CONSORTIUM FOR AUTOMOTIVE RESEARCH LLC (USCAR). USCAR IS A PARTNERSHIP BETWEEN CHRYSLER GROUP LLC, FORD MOTOR COMPANY, AND GENERAL MOTORS CORPORATION ANY CHANGE TO A EWCAP CONTROLLED PORTION OF THIS DRAWING, INCLUDING A "RECORD CHANGE" MUST BE APPROVED. IN WRITING, BY THE RESPONSIBLE EWCAP MEMBER FROM EACH USCAR COMPANY. EACH EWCAP MEMBER AUTHORIZED TO SIGN FOR HIS OR HER COMPANY IS RESPONSIBLE FOR OBTAINING ALL NECESSARY APPROVALS WITHIN THAT COMPANY PRIOR TO SIGNING FOR APPROVAL OF THE CHANGE. EWCAP EXPRESSLY PROHIBITS ANY PARTY FROM CHANGING EITHER ANY EWCAP CONTROLLED PORTION OF THIS DRAWING OR ANY ASSOCIATED TOOLING BEFORE RECEIVING AN APPROVAL SIGNED BY AN AUTHORIZED REPRESENTATIVE FROM EACH EWCAP PARTNER. REFERENCE TO THE SIGNED APPROVAL FORM MUST BE ENTERD IN THIS DRAWING'S CONTROL COLUMN. 18.00 A 3.50 M DATUM D 2X 18.25 MIN D 15.97 +0.10 -0.20 12.90 G SEE DETAIL 5 KEYING OPTION B J J 3.50 2.90 +0.20 -0.80 AT TANGENT 2X �0.805� L 2X 1.00 3.00 ⌖ 0.20 A B A ⌖ 0.20Ⓜ A B AT BASE ⌖ 0.30Ⓜ A B AT TIP 10.50 +0.15 -0.10 DATUM B 2.30 ⌖ 0.50 A B REFER TO EWCAP DWG. NO. EWCAP-001, rev. K 280-T001 2.80 TERMINAL BLADE CONFIGURATION M L X DATUM B 6X �1.20� K 13.82 13.00 6X �0.805� 15.82 ⌖ 0.20Ⓜ A B AT BASE ⌖ 0.30Ⓜ A B AT TIP 1.50 ALL AROUND 10.74 +0.10 -0.20 10.74 +0.10 -0.20 SURFACE MUST BE FREE OF DEFECTS AND PARTING LINES FOR SEALING SURFACE ALL AROUND J CIRCUIT #1 REFER TO EWCAP DWG. NO. EWCAP-001, rev. K 150-T001 1.50 TERMINAL BLADE CONFIGURATION 6X 9.80 +0.10 -0.25 CIRCUIT #7 J 3X 3.00 G REFER TO EWCAP DWG. NO. EWCAP-001, rev. D 630-T001 6.30 TERMINAL BLADE CONFIGURATION 6.00 +0.10 -0.25 CIRCUIT #3 4X 3.50 REFER TO EWCAP DWG. NO. EWCAP-001, rev. K 150-T001 1.50 TERMINAL BLADE CONFIGURATION CIRCUIT #8 �0.805� ⌖ 0.20Ⓜ A B ⌖ 0.30Ⓜ A B 2X 8.05 +0.10 -0.25 G 7.00 3X 6.00 3.50 SECTION X-X SCALE 4:1 KEYING OPTION C H K ⌖ 0.30Ⓜ A B DATUM B H CIRCUIT #9 X CIRCUIT #4 40° 2X �2.50� �6.00� ⌖ 0.30Ⓜ A B G CIRCUIT #6 2X 11.25 ⌖ 0.30Ⓜ A B REFER TO EWCAP DWG. NO. EWCAP-001 rev. K 280-T001 2.80 TERMINAL BLADE CONFIGURATION REFER TO EWCAP DWG. NO. EWCAP-001, rev. D 630-T001 6.30 TERMINAL BLADE CONFIGURATION 13.82 G NOTES: UNLESS OTHERWISE SPECIFIED 1. ALL DIMENSIONS SHOWN IN MILLIMETERS. 10.16 10.74 +0.10 -0.20 2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994 F F 3. 0.25 RADII ON ALL CORNERS SHOWN SHARP. 4. UNSPECIFIED RADII: 0.25 EXCEPT AS NOTED. 5. STANDARD COLORS FOR POLARIZATION (SEE CHART). DEVIATION REQUIRES APPROVAL OF AUTHORIZED PERSON. 20.20 +0.10 -0.20 KEYING OPTION D DATUM G 6. REFER TO "SAE/USCAR 12 CONNECTOR GUIDELINES" FOR ADDITIONAL REQUIREMENTS. E 8. ⌓ 0.15 A B D 4X R 5.73 ⌢ 0.15 A B 17.95 15.33 2X R 31.73 2X R 30.42 C 2X R 641.56 B SECTION J-J CONSTRUCTION BELOW THIS SURFACE IS NOT CONTROLED BY EWCAP. NO PLASTIC FEATURES MAY EXTEND ABOVE THIS SURFACE SYMBOLS = 0 = 0 = 0 11. REFER TO USCAR/EWCAP PART LIST AS FOUND ON WEBSITE http://www.uscarteams.org D C B A STONE GRAY DARK GRAY LIGHT GRAY BLACK MATING CONNECTOR OPTION COLOR 23 P1 RELEASE DATE 22 21 2021/03/03 20 23:36:12 19 C 18 17 16 15 14 13 12 11 DIMENSION UNITS SCALE mm 4:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES = 0 10 CURRENT REV DESC: C GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ANGULAR TOL = 0 12. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. DOCUMENT STATUS 24 SECTION G-G SCALE 4:1 10. A FULL SHROUD ON THE MATING CONNECTOR IS REQUIRED TO INSURE THAT THE CONNECTOR-HEADER POLARIZATION FEATURES (OPTIONS A THRU D) WILL FUNCTION. THE FULL SHROUD ALSO PREVENTS SCOOP DAMAGE TO THE HEADER PINS. REFER TO "SAE/USCAR-12 CONNECTOR DESIGN GUIDE LINES" FOR ADDITIONAL INFORMATION. 40.83 FORMAT: master-tb-prod-E REVISION: H DATE: 2018/01/18 SYMBOL INDICATES DRAFT DIRECTION. 9. FOR TERMINAL MATERIAL, DIMENSIONAL, AND COATING REQUIREMENTS AND ANY BLADE TERMINAL DESIGN INFORMATION NOT SHOWN ON THIS DRAWING SEE EWCAP DRW. NO. EWCAP-001, rev. K 1.5 PLATING: UNDERPLATING: ELECTRO-DEPOSITED NICKEL SULFAMATE 1.00-1.80 MICROMETERS TOP LAYER: ELECTRO-DEPOSITED SILVER 1.90-3.30 MICROMETERS ENVIRONMENTAL BARRIER: EVABRITE-S 2.8 PLATING: UNDERPLATING: ELECTRO-DEPOSITED NICKEL SULFAMATE 1.00-1.80 MICROMETERS TOP LAYER: ELECTRO-DEPOSITED SILVER 1.90-3.30 MICROMETERS ENVIRONMENTAL BARRIER: EVABRITE-S 6.3 PLATING: UNDERPLATING: ELECTRO-DEPOSITED NICKEL 1.25-2.25 MICROMETERS TOP LAYER: ELECTRO-DEPOSITED SILVER 1.90-3.30 MICROMETERS ENVIRONMENTAL BARRIER: EVABRITE-S 2X R 642.87 2X R 4.42 E 7. EXCEPT WHERE NOTED, DRAFT ON OUTSIDE SURFACES IS PERMISSIBLE WITHIN TOLERANCE. 43.45 A 0.25° MAX DRAFT ± 1 PLACE ± 0 PLACES ± 3.0 ° 0.1 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 9 EC NO: 660404 DRWN: ATEEGULLA CHK'D: KBORUSZEWSKI APPR: KBORUSZEWSKI INITIAL REVISION: DRWN: APROFFITT APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING 2021/04/08 2021/04/08 2021/04/08 7 6 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/01/29 2015/05/21 SERIES E-SIZE 160076 8 MX150 HYB RCPT DUAL ROW SEALED ASSY DUAL ROW SEALED ASSEMBLY MAT SEAL 5 SD-160076-0001 MATERIAL NUMBER SEE NOTE 2a. 4 SHEET NUMBER CUSTOMER GENERAL MARKET 3 A8 PSD 001 2 6 OF 7 1 A 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 S S NO PARTING LINE AT THIS LOCATION 24.00 MIN 1.79 ±0.20 SEE DETAIL 6 24.00 MIN 15.00 MIN 11.30 MIN 40° 15.82 R R 2.00 5° R 30° 0.65 ±0.15 ALL AROUND 10.74 +0.10 -0.20 10.20 20.50 MIN ALL AROUND FOR MATING CONNECTOR SHROUD CLEARANCE Q Q R �6.47� 20.20 +0.10 -0.20 KEY A P P DETAIL 1 SCALE 10:1 1.25 ±0.05 ⌖ 0.10Ⓜ A B NOTICE 20° N N THIS DRAWING OR PORTIONS OF IT, ARE CONTROLLED BY THE ELECTRICAL WIRING COMPONENTS APPLICATION PARTNERSHIP (EWCAP), A SUBGROUP OF THE UNITED STATES CONSORTIUM FOR AUTOMOTIVE RESEARCH LLC (USCAR). USCAR IS A PARTNERSHIP BETWEEN CHRYSLER GROUP LLC, FORD MOTOR COMPANY, AND GENERAL MOTORS CORPORATION ANY CHANGE TO A EWCAP CONTROLLED PORTION OF THIS DRAWING, INCLUDING A "RECORD CHANGE" MUST BE APPROVED. IN WRITING, BY THE RESPONSIBLE EWCAP MEMBER FROM M EACH USCAR COMPANY. EACH EWCAP MEMBER AUTHORIZED TO SIGN FOR HIS OR HER COMPANY IS RESPONSIBLE FOR OBTAINING ALL NECESSARY APPROVALS WITHIN THAT COMPANY PRIOR TO SIGNING FOR APPROVAL OF THE CHANGE. EWCAP EXPRESSLY PROHIBITS ANY PARTY FROM CHANGING EITHER ANY EWCAP CONTROLLED PORTION OF THIS DRAWING OR ANY ASSOCIATED TOOLING BEFORE RECEIVING AN APPROVAL SIGNED BY AN AUTHORIZED REPRESENTATIVE L FROM EACH EWCAP PARTNER. REFERENCE TO THE SIGNED APPROVAL FORM MUST BE ENTERD IN THIS DRAWING'S CONTROL COLUMN. 13.82 DATUM D 13.82 2X 18.25 MIN 10.74 +0.10 -0.20 M 18.00 DETAIL 6 SCALE 10:1 A P P 3.50 15.97 +0.10 -0.20 2X 1.00 3.00 ⌖ 0.20 A B 3.50 D A 12.90 2.90 +0.20 -0.80 AT TANGENT G L 2.30 ⌖ 0.20 A B KEY B SEE DETAIL 1 6X �1.20� ⌖ 0.30Ⓜ A B 10.50 +0.15 -0.10 DATUM B K CIRCUIT #3 CIRCUIT #1 4X �0.805� ⌖ 0.20Ⓜ A B AT BASE ⌖ 0.30Ⓜ A B 4X 3.50 N CIRCUIT #7 REFER TO EWCAP DWG. NO. EWCAP-001, rev. K 150-T001 1.50 TERMINAL BLADE CONFIGURATION CIRCUIT #8 K REFER TO EWCAP DWG. NO. EWCAP-001, rev. K 280-T001 2.80 TERMINAL BLADE CONFIGURATION 3X 3.00 40° 6X �0.805� 1.50 ALL AROUND 15.82 J 10.16 10.74 +0.10 -0.20 6X M J REFER TO EWCAP DWG. NO. EWCAP-001, rev. K 150-T001 1.50 TERMINAL BLADE CONFIGURATION SURFACE MUST BE FREE OF DEFECTS AND PARTING LINES FOR SEALING SURFACE ALL AROUND M 2X 3.50 ⌖ 0.20Ⓜ A B AT BASE ⌖ 0.30Ⓜ A B 2X7.00 CIRCUIT #9 CIRCUIT #10 N CIRCUIT #6 CIRCUIT #4 9.80 +0.10 -0.25 2X11.25 4X 8.05 +0.10 -0.25 H 3X 6.00 H 4X �2.50� 2X 22.50 ⌖ 0.30Ⓜ A B SECTION N-N SCALE 4:1 20.20 +0.10 -0.20 REFER TO EWCAP DWG. NO. EWCAP-001 rev. K 280-T001 2.80 TERMINAL BLADE CONFIGURATION NOTES: UNLESS OTHERWISE SPECIFIED 1. ALL DIMENSIONS SHOWN IN MILLIMETERS. G G KEY C 2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994 3. 0.25 RADII ON ALL CORNERS SHOWN SHARP. 4. UNSPECIFIED RADII: 0.25 EXCEPT AS NOTED. 5. STANDARD COLORS FOR POLARIZATION (SEE CHART). DEVIATION REQUIRES APPROVAL OF AUTHORIZED PERSON. 20° 0.25° MAX DRAFT DATUM G F F 6. REFER TO "SAE/USCAR 12 CONNECTOR GUIDELINES" FOR ADDITIONAL REQUIREMENTS. 13.82 7. EXCEPT WHERE NOTED, DRAFT ON OUTSIDE SURFACES IS PERMISSIBLE WITHIN TOLERANCE. 13.80 8. 10.74 +0.10 -0.20 E 9. FOR TERMINAL MATERIAL, DIMENSIONAL, AND COATING REQUIREMENTS AND ANY BLADE TERMINAL DESIGN INFORMATION NOT SHOWN ON THIS DRAWING SEE EWCAP DRW. NO. EWCAP-001, rev. K 1.5 PLATING: UNDERPLATING: ELECTRO-DEPOSITED NICKEL SULFAMATE 1.00-1.80 MICROMETERS TOP LAYER: ELECTRO-DEPOSITED SILVER 1.90-3.30 MICROMETERS ENVIRONMENTAL BARRIER: EVABRITE-S 2.8 PLATING: UNDERPLATING: ELECTRO-DEPOSITED NICKEL SULFAMATE 1.00-1.80 MICROMETERS TOP LAYER: ELECTRO-DEPOSITED SILVER 1.90-3.30 MICROMETERS ENVIRONMENTAL BARRIER: EVABRITE-S 15.97 +0.10 -0.20 43.45 ⌓ 0.15 A B D 2X R 642.87 KEY D 2X R 5.73 ⌢ 0.15 A B C SECTION M-M SCALE 4:1 SYMBOL INDICATES DRAFT DIRECTION. 17.95 2X R 31.73 15.33 2X R 30.42 10. A FULL SHROUD ON THE MATING CONNECTOR IS REQUIRED TO INSURE THAT THE CONNECTOR-HEADER POLARIZATION FEATURES (OPTIONS A THRU D) WILL FUNCTION. THE FULL SHROUD ALSO PREVENTS SCOOP DAMAGE TO THE HEADER PINS. REFER TO "SAE/USCAR-12 CONNECTOR DESIGN GUIDE LINES" FOR ADDITIONAL INFORMATION. D SYMBOLS = 0 11. REFER TO USCAR/EWCAP PART LIST AS FOUND ON WEBSITE http://www.uscarteams.org = 0 2X R 4.42 = 0 12. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. A FORMAT: master-tb-prod-E REVISION: H DATE: 2018/01/18 24 23 22 21 2021/03/03 20 40.83 = 0 ± SECTION P-P = 0 2 PLACES C 18 17 16 15 14 13 12 11 = 0 10 CURRENT REV DESC: C GENERAL TOLERANCES (UNLESS SPECIFIED) 3 PLACES 23:36:12 19 4:1 ± = 0 RELEASE DATE mm 4 PLACES = 0 P1 SCALE = 0 SCALE 3:1 DOCUMENT STATUS DIMENSION UNITS ± B STONE GRAY DARK GRAY LIGHT GRAY BLACK MATING CONNECTOR OPTION COLOR THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ANGULAR TOL 2X R 641.56 D C B A E CONSTRUCTION BELOW THIS SURFACE IS NOT CONTROLED BY EWCAP. NO PLASTIC FEATURES MAY EXTEND ABOVE THIS SURFACE ± 1 PLACE ± 0 PLACES ± 3.0 ° 0.1 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 9 EC NO: 660404 DRWN: ATEEGULLA CHK'D: KBORUSZEWSKI APPR: KBORUSZEWSKI INITIAL REVISION: DRWN: APROFFITT APPR: VKOSHY THIRD ANGLE PROJECTION DRAWING 2021/04/08 2021/04/08 2021/04/08 7 6 B PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/01/29 2015/05/21 SERIES E-SIZE 160076 8 MX150 HYB RCPT DUAL ROW SEALED ASSY DUAL ROW SEALED ASSEMBLY MAT SEAL 5 SD-160076-0001 MATERIAL NUMBER SEE NOTE 2a. 4 SHEET NUMBER CUSTOMER GENERAL MARKET 3 A8 PSD 001 2 7 OF 7 1 A MX150 1.5/6.3 HYBRID 8 WAY RECEPTACLE SEALED ASSEMBLY MAT SEAL BOM AND PIN OUT SHEET CPA OPTIONAL SEE BOM GROMMET CAP TERMINAL POSITION 1 TERMINAL POSITION 7 ABBREVIATION A1-BLK B1-LG C1-DG D1-SG A1-BLK-CLIP B1-LG-CLIP C1-DG-CLIP D1-SG-CLIP GCP GCO PLR CPA M R MAT SEAL RING SEAL DESCRIPTION HOUSING KEYING OPTION A HOUSING KEYING OPTION B HOUSING KEYING OPTION C HOUSING KEYING OPTION D HOUSING KEYING OPTION A WITH CLIPSLOT HOUSING KEYING OPTION B WITH CLIPSLOT HOUSING KEYING OPTION C WITH CLIPSLOT HOUSING KEYING OPTION D WITH CLIPSLOT GROMMET CAP (PLUGGED) GROMMET CAP (OPEN) PLR CPA MAT SEAL RING SEAL COLOR BLACK LIGHT GRAY DARK GRAY STONE GRAY BLACK LIGHT GRAY DARK GRAY STONE GRAY BLACK BLACK NATURAL RED LIGHT BLUE GREEN MATERIAL PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PBT GF20 INHERENTLY LUBRICATED SILICONE INHERENTLY LUBRICATED SILICONE CONNECTOR HOUSING FOR OPTIONS SEE BOM TERMINAL POSITION 8 TERMINAL POSITION 4 PRIMARY LOCK REINFORCEMENT (PLR) FOR ADDITIONAL INFORMATION SEE SD-160076-0001 ASSEMBLY DESCRIPTION KEY A, BLACK, W/O CPA KEY B, LIGHT GRAY, W/O CPA KEY C, DARK GRAY, W/O CPA KEY D, STONE GRAY, W/O CPA VOID KEY KEY A, BLACK, W/ CPA KEY B, LIGHT GRAY, W/ CPA KEY C, DARK GRAY, W/ CPA KEY D, STONE GRAY, W/ CPA VOID KEY KEY A, BLACK, W/ CLIPSLOT, W/O CPA KEY B, LIGHT GRAY, W/ CLIPSLOT, W/O CPA KEY C, DARK GRAY, W/ CLIPSLOT, W/O CPA KEY D, STONE GRAY, W/ CLIPSLOT, W/O CPA VOID KEY KEY A, BLACK, W/ CLIPSLOT, W/ CPA KEY B, LIGHT GRAY, W/ CLIPSLOT, W/ CPA KEY C, DARK GRAY, W/ CLIPSLOT, W/ CPA KEY D, STONE GRAY, W/ CLIPSLOT, W/ CPA VOID KEY KEY A, BLACK, W/ CPA KEY A, BLACK, W/ CPA KEY A, BLACK, W/ CPA KEY B, LIGHT GRAY, W/ CPA KEY A, BLACK, W/ CLIPSLOT, W/ CPA KEY C, DARK GRAY, W/O CPA KEY A, BLACK, W/ CPA KEY A, BLACK, W/ CPA KEY A, BLACK, W/ CPA EC: 677478 10/11/2021 ASSEMBLY PART NUMBER 160078-3001 160078-3002 160078-3003 160078-3004 160078-3005 160078-3006 160078-3007 160078-3008 160078-3009 160078-3010 160078-3011 160078-3012 160078-3013 160078-3014 160078-3015 160078-3016 160078-3017 160078-3018 160078-3019 160078-3020 160078-3021 160078-3022 160078-3023 160078-3024 160078-3025 160078-3026 160078-3027 160078-3028 160078-3029 COMPONENT BLOCKED TERMINALS THE PRESENCE OF AN ABBREVIATION INDICATES THE PRESENCE OF THAT COMPONENT. CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION HOUSING KEY/COLOR GROMMET CAP PLR A1-BLK B1-LG C1-DG D1-SG GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK B1-LG C1-DG D1-SG GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK-CLIP B1-LG-CLIP C1-DG-CLIP D1-SG-CLIP GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK-CLIP B1-LG-CLIP C1-DG-CLIP D1-SG-CLIP GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK A1-BLK A1-BLK B1-LG A1-BLK-CLIP C1-DG A1-BLK A1-BLK A1-BLK GCO GCP GCP GCP GCP GCP GCP GCP GCP PLR PLR PLR PLR PLR PLR PLR PLR PLR CPA MAT SEAL RING SEAL 1 2 3 4 5 6 7 OPTIONAL ATTATCHMENTS SOLD SEPERATELY STATUS 8 COMMENTS BACKSHELL WITH RIBS BACKSHELL WITHOUT RIBS M M M M R R R R SALEABLE SALEABLE SALEABLE SALEABLE TBD TBD TBD TBD TBD TBD TBD TBD M M M M R R R R SALEABLE SALEABLE SALEABLE SALEABLE TBD TBD TBD TBD TBD TBD TBD TBD M M M M R R R R SALEABLE SALEABLE SALEABLE SALEABLE TBD TBD TBD TBD TBD TBD TBD TBD CPA CPA CPA CPA M M M M R R R R SALEABLE SALEABLE SALEABLE SALEABLE TBD TBD TBD TBD TBD TBD TBD TBD CPA CPA CPA CPA CPA M M M M M M M M M R R R R R R R R R SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD CPA CPA CPA CPA CPA CPA CPA 7 1 2 1 2 3 3 3 3 4 4 4 5 5 5 6 6 6 4 5 5 5 6 6 6 1 4 1 2 DOCUMENT NO.: E-160076-0002 3 REVISION: B11 PAGE: 1 OF 1 MX150 1.5/2.8/6.3 HYBRID 9 WAY RECEPTACLE SEALED ASSEMBLY MAT SEAL BOM AND PIN OUT SHEET CPA OPTIONAL SEE BOM GROMMET CAP TERMINAL POSITION 8 TERMINAL POSITION 1 TERMINAL POSITION 7 ABBREVIATION A1-BLK B1-LG C1-DG D1-SG A1-BLK-CLIP B1-LG-CLIP C1-DG-CLIP D1-SG-CLIP GCP GCO PLR CPA M R MAT SEAL RING SEAL DESCRIPTION HOUSING KEYING OPTION A HOUSING KEYING OPTION B HOUSING KEYING OPTION C HOUSING KEYING OPTION D HOUSING KEYING OPTION A WITH CLIPSLOT HOUSING KEYING OPTION B WITH CLIPSLOT HOUSING KEYING OPTION C WITH CLIPSLOT HOUSING KEYING OPTION D WITH CLIPSLOT GROMMET CAP (PLUGGED) GROMMET CAP (OPEN) PLR CPA MAT SEAL RING SEAL COLOR BLACK LIGHT GRAY DARK GRAY STONE GRAY BLACK LIGHT GRAY DARK GRAY STONE GRAY BLACK BLACK NATURAL RED LIGHT BLUE GREEN MATERIAL PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PBT GF20 INHERENTLY LUBRICATED SILICONE INHERENTLY LUBRICATED SILICONE CONNECTOR HOUSING FOR OPTIONS SEE BOM TERMINAL POSITION 9 TERMINAL POSITION 4 PRIMARY LOCK REINFORCEMENT (PLR) FOR ADDITIONAL INFORMATION SEE SD-160076-0001 ASSEMBLY DESCRIPTION KEY A, BLACK, W/O CPA KEY B, LIGHT GRAY, W/O CPA KEY C, DARK GRAY, W/O CPA KEY D, STONE GRAY, W/O CPA VOID KEY KEY A, BLACK, W/ CPA KEY B, LIGHT GRAY, W/ CPA KEY C, DARK GRAY, W/ CPA KEY D, STONE GRAY, W/ CPA VOID KEY KEY A, BLACK, W/ CLIPSLOT, W/O CPA KEY B, LIGHT GRAY, W/ CLIPSLOT, W/O CPA KEY C, DARK GRAY, W/ CLIPSLOT, W/O CPA KEY D, STONE GRAY, W/ CLIPSLOT, W/O CPA VOID KEY KEY A, BLACK, W/ CLIPSLOT, W/ CPA KEY B, LIGHT GRAY, W/ CLIPSLOT, W/ CPA KEY C, DARK GRAY, W/ CLIPSLOT, W/ CPA KEY D, STONE GRAY, W/ CLIPSLOT, W/ CPA VOID KEY KEY A, BLACK, W/ CPA KEY A, BLACK, W/ CPA EC: 677478 10/11/2021 ASSEMBLY PART NUMBER 160080-3001 160080-3002 160080-3003 160080-3004 160080-3005 160080-3006 160080-3007 160080-3008 160080-3009 160080-3010 160080-3011 160080-3012 160080-3013 160080-3014 160080-3015 160080-3016 160080-3017 160080-3018 160080-3019 160080-3020 160080-3021 160080-3022 COMPONENT BLOCKED TERMINALS THE PRESENCE OF AN ABBREVIATION INDICATES THE PRESENCE OF THAT COMPONENT. CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION HOUSING KEY/COLOR GROMMET CAP PLR A1-BLK B1-LG C1-DG D1-SG GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK B1-LG C1-DG D1-SG GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK-CLIP B1-LG-CLIP C1-DG-CLIP D1-SG-CLIP GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK-CLIP B1-LG-CLIP C1-DG-CLIP D1-SG-CLIP GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK A1-BLK GCO GCP PLR PLR BACKSHELL WITHOUT RIBS SALEABLE OK TO TOOL OK TO TOOL OK TO TOOL TBD TBD TBD TBD TBD TBD TBD TBD R R R R SALEABLE OK TO TOOL OK TO TOOL OK TO TOOL TBD TBD TBD TBD TBD TBD TBD TBD M M M M R R R R SALEABLE OK TO TOOL OK TO TOOL OK TO TOOL TBD TBD TBD TBD TBD TBD TBD TBD CPA CPA CPA CPA M M M M R R R R SALEABLE OK TO TOOL OK TO TOOL OK TO TOOL TBD TBD TBD TBD TBD TBD TBD TBD CPA CPA M M R R OK TO TOOL OK TO TOOL TBD TBD TBD TBD CPA CPA CPA CPA RING SEAL M M M M R R R R M M M M COMMENTS BACKSHELL WITH RIBS CPA MAT SEAL OPTIONAL ATTATCHMENTS SOLD SEPERATELY STATUS 1 2 3 4 5 6 7 8 9 9 2 DOCUMENT NO.: E-160076-0002 4 5 6 REVISION:B11 PAGE: 1 OF 1 MX150 1.5/6.3 HYBRID 10 WAY RECEPTACLE SEALED ASSEMBLY MAT SEAL BOM AND PIN OUT SHEET GROMMET CAP CPA OPTIONAL SEE BOM TERMINAL POSITION 1 TERMINAL POSITION 7 ABBREVIATION A1-BLK B1-LG C1-DG D1-SG A1-BLK-CLIP B1-LG-CLIP C1-DG-CLIP D1-SG-CLIP GCP GCO PLR CPA M R TERMINAL POSITION 8 MAT SEAL RING SEAL CONNECTOR HOUSING FOR OPTIONS SEE BOM DESCRIPTION HOUSING KEYING OPTION A HOUSING KEYING OPTION B HOUSING KEYING OPTION C HOUSING KEYING OPTION D HOUSING KEYING OPTION A WITH CLIPSLOT HOUSING KEYING OPTION B WITH CLIPSLOT HOUSING KEYING OPTION C WITH CLIPSLOT HOUSING KEYING OPTION D WITH CLIPSLOT GROMMET CAP (PLUGGED) GROMMET CAP (OPEN) PLR CPA MAT SEAL RING SEAL COLOR BLACK LIGHT GRAY DARK GRAY STONE GRAY BLACK LIGHT GRAY DARK GRAY STONE GRAY BLACK BLACK NATURAL RED LIGHT BLUE GREEN MATERIAL PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PA6 GF40 PBT GF20 INHERENTLY LUBRICATED SILICONE INHERENTLY LUBRICATED SILICONE TERMINAL POSITION 9 TERMINAL POSITION 10 TERMINAL POSITION 4 PRIMARY LOCK REINFORCEMENT (PLR) FOR ADDITIONAL INFORMATION SEE SD-160076-0001 ASSEMBLY DESCRIPTION KEY A, BLACK, W/O CPA KEY B, LIGHT GRAY, W/O CPA KEY C, DARK GRAY, W/O CPA KEY D, STONE GRAY, W/O CPA VOID KEY KEY A, BLACK, W/ CPA KEY B, LIGHT GRAY, W/ CPA KEY C, DARK GRAY, W/ CPA KEY D, STONE GRAY, W/ CPA VOID KEY KEY A, BLACK, W/ CLIPSLOT, W/O CPA KEY B, LIGHT GRAY, W/ CLIPSLOT, W/O CPA KEY C, DARK GRAY, W/ CLIPSLOT, W/O CPA KEY D, STONE GRAY, W/ CLIPSLOT, W/O CPA VOID KEY KEY A, BLACK, W/ CLIPSLOT, W/ CPA KEY B, LIGHT GRAY, W/ CLIPSLOT, W/ CPA KEY C, DARK GRAY, W/ CLIPSLOT, W/ CPA KEY D, STONE GRAY, W/ CLIPSLOT, W/ CPA VOID KEY KEY A, BLACK, W/ CPA KEY A, BLACK, W/ CPA KEY A, BLACK, W/ CPA KEY A, BLACK, W/ CPA KEY A, BLACK, W/ CPA KEY A, BLACK, W/ CPA KEY B, LIGHT GRAY, W/ CPA EC: 677478 10/11/2021 ASSEMBLY PART NUMBER 160076-5001 160076-5002 160076-5003 160076-5004 160076-5005 160076-5006 160076-5007 160076-5008 160076-5009 160076-5010 160076-5011 160076-5012 160076-5013 160076-5014 160076-5015 160076-5016 160076-5017 160076-5018 160076-5019 160076-5020 160076-5021 160076-5022 160076-5023 160076-5024 160076-5025 160076-5026 160076-5027 COMPONENT BLOCKED TERMINALS THE PRESENCE OF AN ABBREVIATION INDICATES THE PRESENCE OF THAT COMPONENT. CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION HOUSING KEY/COLOR GROMMET CAP PLR A1-BLK B1-LG C1-DG D1-SG GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK B1-LG C1-DG D1-SG GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK-CLIP B1-LG-CLIP C1-DG-CLIP D1-SG-CLIP GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK-CLIP B1-LG-CLIP C1-DG-CLIP D1-SG-CLIP GCO GCO GCO GCO PLR PLR PLR PLR A1-BLK A1-BLK A1-BLK A1-BLK A1-BLK A1-BLK B1-LG GCO GCO GCO GCO GCP GCP GCP PLR PLR PLR PLR PLR PLR PLR MAT SEAL RING SEAL M M M M R R R R M M M M OPTIONAL ATTATCHMENTS SOLD SEPERATELY STATUS COMMENTS BACKSHELL WITH RIBS BACKSHELL WITHOUT RIBS SALEABLE SALEABLE SALEABLE SALEABLE TBD TBD TBD TBD TBD TBD TBD TBD R R R R SALEABLE SALEABLE SALEABLE SALEABLE TBD TBD TBD TBD TBD TBD TBD TBD M M M M R R R R SALEABLE SALEABLE SALEABLE SALEABLE TBD TBD TBD TBD TBD TBD TBD TBD CPA CPA CPA CPA M M M M R R R R SALEABLE SALEABLE SALEABLE SALEABLE TBD TBD TBD TBD TBD TBD TBD TBD CPA CPA CPA CPA CPA CPA CPA M M M M M M M R R R R R R R SALEABLE SALEABLE SALEABLE SALEABLE OK TO TOOL OK TO TOOL OK TO TOOL TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD CPA CPA CPA CPA CPA 1 2 3 4 5 6 7 8 9 10 7 7 7 1 1 3 2 2 5 4 3 DOCUMENT NO.: E-160076-0002 6 5 8 8 9 9 10 10 REVISION:B11 PAGE: 1 OF 1