1601116009

20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 TABLE OF CONTENTS M SHEET DESCRIPTION 1 NOTES 2 CONFIGURATIONS 3 KEY CONFIGURATIONS 4 RECEPTACLE CONNECTOR ASSEMBLY 5 12W HYBRID CONNECTOR BOM 6 12W HYBRID CONNECTOR BOM 7 12W HYBRID INTERFACE DEFINITION L 1 INTERFACE DEFINITION MOLEX INLINE SEE PAGE 6 E-1601120000 RPK-1601110900 12W HYBRID 2 MATING INTERFACE/CONNECTOR DRAWINGS PACKAGING DRAWING NO. DESCRIPTION SHEET NO. 3 M L NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: 1.1 APPLICATION SPECIFICATION SEE: 1601110001-AS - CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLE SHOOTING. - DESIGNED TO MATE WITH DEVICE OR CONNECTOR AS SPECIFIED IN THE MATING INTERFACE/CONNECTOR DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESSED AT [http://ewcap.uscarteams.org/] - ASSEMBLY SHIPPED WITH THE FOLLOWING PARTS IN PRE-LOCK POSITION (PLR, CPA, ISL, LEVEL. SEE PRE-LOCK VIEW ON PAGE 4). 1.2 PRODUCT SPECIFICATION SEE: 1601110001-PS - CONTAINS: SCOPE, PRODUCT DESCRIPTION, INTEGRAL COMPONENTS AND ACCESSORIES, APPLICABLE DOCUMENTS AND SPECIFICATIONS, RATINGS, PERFORMANCE, PACKAGING, GAUGES AND FIXTURES, AND OTHER INFORMATION. 1.3 PACKAGING SPECIFICATION PER MOLEX DRAWING: SEE PACKAGING CHART 1.4 PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-300 1.5 DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) K J H 12W HYBRID W/ EXTENED CLIPSLOT K J H 2. DESIGN - MATERIALS: 2.1 SEE BOM TABLE G G 3. DESIGN - GEOMETRY: 3.1 THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MUST BE TAKEN FROM THE DATA FILE AT ITS LATEST REVISION. 3.2 THE 3-D CAD DATA IS MASTER FOR THIS PART AND IS TO BE USED TO ESTABLISH DIMENSIONAL INFORMATION NOT SHOWN ON THIS DRAWING. ANY DIMENSIONS UNDERLINED INDICATE A CONFLICT WITH THE MODEL. 3.3 PRODUCT DESIGN MODEL NUMBER(S): SEE BOM TABLE 3.4 GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 3.5 EDGES OF UNDEFINED SHAPE PER ISO 13715 3.6 CORNERS SHOWN AS SHARP TO BE R 0.2 MAX 3.7 LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. 3.8 VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (CLASS B). 3.9 LASER MARKING 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR FOR ADDTIONAL INFORMATION SEE SECTION 5 UNDER PROCEDURES IN ES-34735-008. F E 12W HYBRID NON-CLIPSLOT D6 ADD NEW PART NO. 160111-6068 160111-6069 D5 ADD NEW PART NO. 160111-6064 160111-6065 160111-6066 160111-6067 D4 ADD 160111-6062 AND 160111-6063 D3 ADD 160111-6061 D2 ADD 160111-6059 AND 6060 D1 ADD 160111-6054 THRU 6058 D ADD 160111-6050 THRU 6053 C2 UPDATED NOTES C1 CHANGE DOCUMENT TYPE FROM RSD TO SD C ADD 160111-6046 THRU 6049 B UPDATED INFORMATION TO PRODUCTION LEVEL A2 ADDED NEW PART NO. 160111-6039 160111-6040 160111-6041 160111-6042 160111-6043 160111-6044 160111-6045 A1 ADDED NEW PART NO. 160111-6021 160111-6022 160111-6023 160111-6024 160111-6025 160111-6026 160111-6027 160111-6028 160111-6029 160111-6030 160111-6031 160111-6032 160111-6033 160111-6034 160111-6035 160111-6036 160111-6037 160111-6038 INSPECTION NUMBER LOG A INITIAL RELEASE LAST NUMBER: 7 REV D E D REV DESCRIPTION FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = 0 0 mm GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 0.00000 DIVISIONAL 3 PLACES SYMBOLS B 2:1 ± 0.0000 N 2 PLACES 0.5 ° S = 0 TE = O C F ± 0.000 ± 0.00 0 PLACES ± 0.00 SE E 1 PLACE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS A FORMAT: TC-tb-prod-D REVISION: A DATE: 2021/08/11 19 18 17 16 15 14 13 12 11 10 9 8 7 PHASE: Design Production CO NO: CO-000000522 DRWN: Srikanth CV CHK'D: Chaitra D APPR: Gurunandan GA INITIAL REVISION: DRWN: Srikanth CV APPR: Gurunandan GA THIRD ANGLE PROJECTION MX150 HYBRID MAT SEAL RCPT CONN ASM 2022-02-16 2022-02-17 2022-02-17 PRODUCT SALES DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2022-02-16 2022-02-17 DRAWING 5 1601110000 MATERIAL NUMBER SERIES D-SIZE 160111 6 B PSD 000 SHEET NUMBER CUSTOMER CHARTED 4 D6 1 OF 7 3 2 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION CONFIGURATIONS M M L L K K J J H H G G 12W HYBRID NON-CLIPSLOT 12W HYBRID W/ EXTENED CLIPSLOT F F E E D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE 0 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 0.00000 DIVISIONAL 3 PLACES SYMBOLS B 2:1 ± 0.0000 N 2 PLACES 0.5 ° S = 0 mm TE = 0 O = ± 0.000 ± 0.00 0 PLACES ± 0.00 SE E 1 PLACE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS A FORMAT: TC-tb-prod-D REVISION: A DATE: 2021/08/11 19 18 17 16 15 14 13 12 11 10 9 8 7 PHASE: Design Production CO NO: CO-000000522 DRWN: Srikanth CV CHK'D: Chaitra D APPR: Gurunandan GA INITIAL REVISION: DRWN: Srikanth CV APPR: Gurunandan GA THIRD ANGLE PROJECTION MX150 HYBRID MAT SEAL RCPT CONN ASM 2022-02-16 2022-02-17 2022-02-17 PRODUCT SALES DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2022-02-16 2022-02-17 DRAWING 5 1601110000 MATERIAL NUMBER SERIES D-SIZE 160111 6 B PSD 000 SHEET NUMBER CUSTOMER CHARTED 4 D6 2 OF 7 3 2 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION KEY CONFIGURATIONS M M 12W HYBRID L L K K 25° 25° KEY A J J H H 15° 15° KEY B G G F F 0° 0° KEY C E E D D 0° 0° KEY D FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = 0 0 mm GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 0.00000 DIVISIONAL 3 PLACES SYMBOLS B 3:1 ± 0.0000 N 2 PLACES 0.5 ° S = 0 TE = O C ± 0.000 ± 0.00 0 PLACES ± 0.00 SE E 1 PLACE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS A FORMAT: TC-tb-prod-D REVISION: A DATE: 2021/08/11 19 18 17 16 15 14 13 12 11 10 9 8 7 PHASE: Design Production CO NO: CO-000000522 DRWN: Srikanth CV CHK'D: Chaitra D APPR: Gurunandan GA INITIAL REVISION: DRWN: Srikanth CV APPR: Gurunandan GA THIRD ANGLE PROJECTION MX150 HYBRID MAT SEAL RCPT CONN ASM 2022-02-16 2022-02-17 2022-02-17 PRODUCT SALES DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2022-02-16 2022-02-17 DRAWING 5 1601110000 MATERIAL NUMBER SERIES D-SIZE 160111 6 B PSD 000 SHEET NUMBER CUSTOMER CHARTED 4 D6 3 OF 7 3 2 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION RECEPTACLE CONNECTOR ASSEMBLY M L L MOLD CAVITY I.D. & MANUFACTURING LOCATION CODE THIS LOCATION LASER MARKING ON THIS SURFACE SEE NOTE A RECYCLE CODE THIS LOCATION K K 14.6 MAX 1 J J 13 MAX 2 A 45.2 ±0.3 3.5 TYP. H 4 H W/ EXTENDED CLIPSLOT 8.75 TYP. 2X 18.5 MAX 3 ⌀ 38.2 7 MIN PASS-THRU WITH NO CLEARANCE B G G TERMINAL POSITION 1 F F 2.73 ±0.5 PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION LAST TERMINAL POSITION B 5 37.85 ±0.75 6 SECTION A-A E E NON-CLIPSLOT D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE SECTION B-B = = 0 0 mm GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 0.00000 DIVISIONAL 3 PLACES SYMBOLS B 4:1 ± 0.0000 N 2 PLACES 0.5 ° S 0 TE = O PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN FINAL-STAGED POSITION ± 0.000 ± 0.00 0 PLACES ± 0.00 SE E 1 PLACE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS A FORMAT: TC-tb-prod-D REVISION: A DATE: 2021/08/11 19 18 17 16 15 14 13 12 11 10 9 8 7 PHASE: Design Production CO NO: CO-000000522 DRWN: Srikanth CV CHK'D: Chaitra D APPR: Gurunandan GA INITIAL REVISION: DRWN: Srikanth CV APPR: Gurunandan GA THIRD ANGLE PROJECTION MX150 HYBRID MAT SEAL RCPT CONN ASM 2022-02-16 2022-02-17 2022-02-17 PRODUCT SALES DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2022-02-16 2022-02-17 DRAWING 5 1601110000 MATERIAL NUMBER SERIES D-SIZE 160111 6 B PSD 000 SHEET NUMBER CUSTOMER CHARTED 4 D6 4 OF 7 3 2 1 A 20 19 18 17 16 15 14 13 12 10 11 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION 12W HYBRID CONNECTOR BOM M M L GROMMET CAP FOR OPTIONS SEE BOM CPA TERMINAL POSITION 1 DESCRIPTION COLOR MATERIAL A-BLK-ECLIP HOUSING KEYING OPTION A W/ EXTENDED CLIP BLACK PA6 GF40 B-LG-ECLIP HOUSING KEYING OPTION B W/ EXTENDED CLIP LIGHT GRAY PA6 GF40 C-DG-ECLIP HOUSING KEYING OPTION C W/ EXTENDED CLIP DARK GRAY PA6 GF40 D-SG-ECLIP HOUSING KEYING OPTION D W/ EXTENDED CLIP STONE GRAY PA6 GF40 A-Y-ECLIP HOUSING KEYING OPTION A W/ EXTENDED CLIP YELLOW PA6 GF40 A-BLK HOUSING KEYING OPTION A NON CLIPSLOT BLACK PA6 GF40 B-LG HOUSING KEYING OPTION B NON CLIPSLOT LIGHT GRAY PA6 GF40 C-DG HOUSING KEYING OPTION C NON CLIPSLOT DARK GRAY PA6 GF40 D-SG HOUSING KEYING OPTION D NON CLIPSLOT STONE GRAY PA6 GF40 A-Y HOUSING KEYING OPTION A NON CLIPSLOT YELLOW PA6 GF40 GCP-ECLIP GROMMET CAP (PLUGGED) EXTENDED CLIPSLOT BLACK PA6 GF40 GCP GROMMET CAP (PLUGGED) NON CLIPSLOT BLACK PA6 GF40 PLR PLR NATURAL PA6 GF40 CPA CPA RED PBT GF20 M MAT SEAL LIGHT BLUE INHERENTLY LUBRICATED SILICONE R RING SEAL RUST RED INHERENTLY LUBRICATED SILICONE TERMINAL POSITION 7 K MAT SEAL RING SEAL CONNECTOR HOUSING FOR OPTIONS SEE BOM TERMINAL POSITION 8 L ABBREVIATION TERMINAL POSITION 12 K PRIMARY LOCK REINFORCEMENT (PLR) J ASSEMBLY DESCRIPTION ASSEMBLY PART NUMBER COMPONENT BLOCKED TERMINALS THE PRESENCE OF AN ABBREVIATION INDICATES THE PRESENCE OF THAT COMPONENT. CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION HOUSING KEY/COLOR GROMMET CAP PLR CPA MAT SEAL RING SEAL F E D 1 2 3 4 5 6 7 8 9 10 11 A-BLK GCP PLR M R SALEABLE KEY B, LIGHT GRAY, W/O CPA 160111-6002 B-LG GCP PLR M R SALEABLE KEY C, DARK GRAY, W/O CPA 160111-6003 C-DG GCP PLR M R SALEABLE KEY D, STONE GRAY, W/O CPA 160111-6004 D-SG GCP PLR M R SALEABLE KEY A, YELLOW, W/O CPA 160111-6005 A-Y GCP PLR M R OK TO TOOL KEY A, BLACK, W/ CPA 160111-6006 A-BLK GCP PLR CPA M R SALEABLE KEY B, LIGHT GRAY, W/ CPA 160111-6007 B-LG GCP PLR CPA M R SALEABLE KEY C, DARK GRAY, W/ CPA 160111-6008 C-DG GCP PLR CPA M R SALEABLE KEY D, STONE GRAY, W/ CPA 160111-6009 D-SG GCP PLR CPA M R SALEABLE KEY A, YELLOW, W/ CPA 160111-6010 A-Y GCP PLR CPA M R OK TO TOOL KEY A, BLACK, W/O CPA, W/ EX. CLIPSLOT 160111-6011 A-BLK-ECLIP GCP-ECLIP PLR M R SALEABLE KEY B, LIGHT GRAY, W/O CPA, W/ EX. CLIPSLOT 160111-6012 B-LG-ECLIP GCP-ECLIP PLR M R SALEABLE KEY C, DARK GRAY, W/O CPA, W/ EX. CLIPSLOT 160111-6013 C-DG-ECLIP GCP-ECLIP PLR M R SALEABLE KEY D, STONE GRAY, W/O CPA, W/ EX. CLIPSLOT 160111-6014 D-SG-ECLIP GCP-ECLIP PLR M R SALEABLE KEY A, YELLOW, W/O CPA, W/ EX. CLIPSLOT 160111-6015 A-Y-ECLIP GCP-ECLIP PLR M R OK TO TOOL KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6016 A-BLK-ECLIP GCP-ECLIP PLR CPA M R SALEABLE KEY B, LIGHT GRAY, W/ CPA, W/ EX. CLIPSLOT 160111-6017 B-LG-ECLIP GCP-ECLIP PLR CPA M R SALEABLE KEY C, DARK GRAY, W/ CPA, W/ EX. CLIPSLOT 160111-6018 C-DG-ECLIP GCP-ECLIP PLR CPA M R SALEABLE KEY D, STONE GRAY, W/ CPA, W/ EX. CLIPSLOT 160111-6019 D-SG-ECLIP GCP-ECLIP PLR CPA M R SALEABLE KEY A, YELLOW, W/ CPA, W/ EX. CLIPSLOT 160111-6020 A-Y-ECLIP GCP-ECLIP PLR CPA M R OK TO TOOL KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6021 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6022 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 1 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6023 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 1 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6024 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 1 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6025 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 1 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6026 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 1 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6027 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 1 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6028 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6029 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6030 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6031 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6032 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6033 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6034 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6035 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6036 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6037 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6038 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6039 A-BLK GCP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6040 A-BLK GCP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6041 A-BLK GCP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6042 A-BLK GCP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6043 A-BLK GCP PLR CPA M R 1 2 KEY A, BLACK, W/ CPA 160111-6044 A-BLK GCP PLR CPA M R 1 2 KEY A, BLACK, W/ CPA 160111-6045 A-BLK GCP PLR CPA M R 1 2 2 2 2 4 5 6 7 3 4 5 6 7 8 4 5 6 7 8 4 5 8 4 5 8 3 9 10 OPTIONAL ATTATCHMENTS SOLD SEPERATELY BACKSHELL WITH RIBS 12 160111-6001 3 COMMENTS STATUS KEY A, BLACK, W/O CPA H G J 11 BACKSHELL WITHOUT RIBS H G F SALEABLE 10 SALEABLE SALEABLE 10 SALEABLE SALEABLE 3 10 SALEABLE SALEABLE 2 2 1 3 3 2 3 2 3 4 5 6 7 8 4 5 6 7 8 4 5 8 4 5 8 4 5 6 7 8 7 8 10 2 3 4 5 6 3 3 10 SALEABLE SALEABLE 9 10 SALEABLE 10 SALEABLE 10 11 12 SALEABLE 10 11 12 SALEABLE 7 9 12 SALEABLE 7 9 12 SALEABLE 12 SALEABLE 7 9 10 7 9 10 SALEABLE SALEABLE 11 4 5 6 7 9 10 4 5 6 7 9 10 11 11 3 4 5 6 E SALEABLE 8 1 SALEABLE 7 8 9 10 7 8 9 7 8 9 SALEABLE SALEABLE 12 SALEABLE 10 12 SALEABLE 10 12 SALEABLE FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = 0 0 mm GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 0.00000 DIVISIONAL 3 PLACES SYMBOLS B 1:1 ± 0.0000 N 2 PLACES 0.5 ° S = 0 TE = O C D ± 0.000 ± 0.00 0 PLACES ± 0.00 SE E 1 PLACE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS A FORMAT: TC-tb-prod-D REVISION: A DATE: 2021/08/11 19 18 17 16 15 14 13 12 11 10 9 8 7 PHASE: Design Production CO NO: CO-000000522 DRWN: Srikanth CV CHK'D: Chaitra D APPR: Gurunandan GA INITIAL REVISION: DRWN: Srikanth CV APPR: Gurunandan GA THIRD ANGLE PROJECTION MX150 HYBRID MAT SEAL RCPT CONN ASM 2022-02-16 2022-02-17 2022-02-17 PRODUCT SALES DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2022-02-16 2022-02-17 DRAWING 5 1601110000 MATERIAL NUMBER SERIES D-SIZE 160111 6 B PSD 000 SHEET NUMBER CUSTOMER CHARTED 4 D6 5 OF 7 3 2 1 A 24 T 23 22 21 20 19 18 17 16 15 14 13 12 10 11 SHEET DESCRIPTION 12W HYBRID INTERFACE DEFINITION 9 7 8 5 6 4 3 2 1 T IF HEADER IS RECESSED INTO A POCKET, THESE DIMENSIONS REPRESENT THE MINIMUM CLEARANCE REQUIRED FOR THE MATING CONNECTOR SHROUD. 19.6 MIN. 19.6 MIN. S S NO PARTING LINE AT THIS LOCATION 15 MIN. 1.79 ±0.2 20.5 MIN. MIN ALL AROUND FOR MATING CONNECTOR SHROUD CLEARANCE R2 R 30° 15 15 13.5 MIN. 0.7 ±0.15 ALL AROUND R PACKAGING FRAME R �6.47� Q 9.45 Q 9.45 25° 25° 2.3 KEY OPTION A ⌖ 0.20 A B NOTES: UNLESS OTHERWISE SPECIFIED P P 1. ALL DIMENSIONS SHOWN IN MILLIMETERS. 2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994 3. 0.25 RADII ON ALL CORNERS SHOWN SHARP. N N 4. UNSPECIFIED RADII: 0.25 EXCEPT AS NOTED. 13.4 13.4 2X 17 MIN 5. STANDARD COLORS FOR POLARIZATION (SEE CHART). DEVIATION REQUIRES APPROVAL OF AUTHORIZED PERSON. 3.5 J 6. REFER TO "SAE/USCAR 12 CONNECTOR GUIDELINES" FOR ADDTIONAL REQUIREMENTS. J M M 9.45 2X �2.9� 9.45 15° A 15° 10X 9.8 7. EXCEPT WHERE NOTED, DRAFT ON OUTSIDE SURFACES IS PERMISSIBLE WITHIN TOLERANCE. A 8. +0.1 -0.25 SYMBOL INDICATES DRAFT DIRECTION. KEY OPTION B 12.9 9. FOR TERMINAL MATERIAL, DIMENSIONAL, AND COATING REQUIREMENTS AND ANY BLADE TERMINAL DESIGN INFORMATION NOT SHOWN ON THIS DRAWING SEE EWCAP DRW. NO. EWCAP-001 32.83 ⌓ 0.15 A B L +0.2 -0.8 AT TANGENT 2.9 2X 102.5° H 2X R 290.12 TERMINAL POSITION 1 +0.05 10.6 -0.05 �0.805� ⌖ 0.20Ⓜ A B AT BASE K 10. A FULL SHROUD ON THE MATING CONNECTOR IS REQUIRED TO INSURE THAT THE CONNECTOR-HEADER POLARIZATION FEATURES (OPTIONS A THRU D) WILL FUNCTION. THE FULL SHROUD ALSO PREVENT SCOOP DAMAGE TO THE HEADER PINS. REFER TO "SAE/USCAR-12 CONNECTOR DESIGN GUIDE LINES" FOR ADDITIONAL INFORMATION. 3 TYP. ⌖ 0.30Ⓜ A B AT TIP REFER TO EWCAP DWG NO. EWCAP-001 150-T001 1.5 TERMINAL BLADE CONFIGURATION L 11. REFER TO USCAR/EWCAP PART LIST AS FOUND ON WEBSITE http://www.uscarteams.org 17.83 G K G 2X R 31.68 10.9 12. THIS IS 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING. ANALYZE THE CAD MODEL. 10.9 3.3 TYP. �0.805� ⌖ 0.20Ⓜ A B AT BASE J 1.5 ALL AROUND 9.45 9.45 0° 0° ⌖ 0.30Ⓜ A B AT TIP 3.5 'D' 0 2X 7.9 -0.3 4X R 5.67 REFER TO EWCAP DWG NO. EWCAP-001 280-T001 2.8 TERMINAL BLADE CONFIGURATION H DETAIL L 8.75 TYP. TERMINAL POSITION 12 3.5 TYP. �2.5� ⌖ 0.30Ⓜ A B 2X 17 MIN. KEY OPTION C �1.2� ⌖ 0.30Ⓜ A B A H 18 REFER TO EWCAP DWG NO. EWCAP-001 150-T001 1.5 TERMINAL BLADE CONFIGURATION SECTION H-H J REFER TO EWCAP DWG NO. EWCAP-001 280-T001 2.8 TERMINAL BLADE CONFIGURATION SURFACE MUST BE FREE OF SURFACE DEFECTS AND PARTING LINES FOR SEALING ALL AROUND H �2.9� AT TANGENT G G 5.5 15.33 0.25° MAX DRAFT 2X R 30.42 10.9 10.9 F F 4X R 4.42 7.1 7.1 0° 0° SECTION G-G CONSTRUCTION BELOW THIS SURFACE IS NOT CONTROLLED BY EWCAP. NO PLASTIC FEATURE MAY EXTEND ABOVE THIS SURFACE. B 2X R 288.87 ⌢ 0.10 A 30.33 KEY OPTION D E E SECTION J-J NOTICE THIS DRAWING OR PORTIONS OF IT, ARE CONTROLLED BY THE ELECTRICAL WIRING COMPONENTS APPLICATION PARTNERSHIP (EWCAP), A SUBGROUP OF THE UNITED STATES CONSORTIUM FOR AUTOMOTIVE RESEARCH LLC (USCAR). USCAR IS A PARTNERSHIP BETWEEN CHRYSLER GROUP LLC, FORD MOTOR COMPANY, AND GENERAL MOTORS CORPORATION. ANY CHANGE TO A EWCAP CONTROLLED PORTION OF THIS DRAWING, INCLUDING A "RECORD CHANGE" MUST BE APPROVED. IN WRITING, BY THE RESPONSIBLE EWCAP MEMBER FROM EACH USCAR COMPANY. EACH EWCAP MEMBER AUTHORIZED TO SIGN FOR HIS OR HER COMPANY IS RESPONSIBLE FOR OBTAINING ALL NECESSARY APPROVALS WITHIN THAT COMPANY PRIOR TO SIGNING FOR APPROVAL OF THE CHANGE. EWCAP EXPRESSLY PROHIBITS ANY PARTY FROM CHANGING EITHER ANY EWCAP CONTROLLED PORTION OF THIS DRAWING OR ANY ASSOCIATED TOOLING BEFORE RECEIVING AN APPROVAL SIGNED BY AN AUTHORIZED REPRESENTATIVE FROM EACH EWCAP PARTNER. REFERENCE TO THE SIGNED APPROVAL FORM MUST BE ENTERD IN THIS DRAWING'S CONTROL COLUMN. D 1.25 ±0.05 ⌖ 0.10 A B C DETAIL L SCALE 10:1 999-S-012-2-D01 B D C DARK GRAY 999-S-012-2-B01 B LIGHT GRAY 999-S-012-2-A01 A BLACK EWCAP P/N OPTION A FORMAT: TC-tb-prod-E REVISION: A DATE: 2021/08/11 STONE GRAY 999-S-012-2-C01 24 23 CHANGE SERIAL NUMBER = = 0 0 mm 20 19 18 17 16 15 14 13 1/16/17 4/18/16 AD AD MV MV LET REVISION RECORD DATE DWN CHK GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 0.00000 DIVISIONAL 3 PLACES SYMBOLS ± 0.0000 = 0 0.5 ° ± 0.000 2 PLACES 12 11 10 D 1:1 1 PLACE ± 0.00 0 PLACES ± 0.00 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 21 ADDED NOTES AND NOTICE DESIGN RELEASE FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: SEE REVISION TABLE MATING CONNECTOR COLOR 22 A6 A 9 C PHASE: Design Production CO NO: CO-000000522 DRWN: Srikanth CV CHK'D: Chaitra D APPR: Gurunandan GA INITIAL REVISION: DRWN: Srikanth CV APPR: Gurunandan GA THIRD ANGLE PROJECTION 8 7 MX150 HYBRID MAT SEAL RCPT CONN ASM 2022-02-16 2022-02-17 2022-02-17 PRODUCT SALES DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2022-02-16 2022-02-17 DRAWING SERIES E-SIZE 160111 6 5 1601110000 MATERIAL NUMBER D6 PSD 000 SHEET NUMBER CUSTOMER CHARTED 4 7 OF 7 3 B 2 1 A 20 19 18 17 16 15 14 13 12 10 11 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION 12W HYBRID CONNECTOR BOM M M ASSEMBLY DESCRIPTION L ASSEMBLY PART NUMBER COMPONENT BLOCKED TERMINALS THE PRESENCE OF AN ABBREVIATION INDICATES THE PRESENCE OF THAT COMPONENT. CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION HOUSING KEY/COLOR GROMMET CAP PLR CPA MAT SEAL RING SEAL 2 3 1 2 3 4 5 6 160111-6046 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6047 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6048 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 1 2 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6049 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 1 2 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6050 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6051 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6052 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6053 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6054 A-BLK GCP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6055 A-BLK GCP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6056 A-BLK GCP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6057 A-BLK GCP PLR CPA M R 1 2 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6058 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 1 2 3 KEY A, BLACK, W/O CPA, W/ EX. CLIPSLOT 160111-6059 A-BLK-ECLIP GCP-ECLIP PLR M R 1 2 3 KEY A, BLACK, W/O CPA 160111-6060 A-BLK GCP PLR M R KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6061 A-BLK-ECLIP GCP-ECLIP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6062 A-BLK GCP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6063 A-BLK GCP PLR CPA M R KEY A, BLACK, W/ CPA 160111-6064 A-BLK GCP PLR CPA M R 1 2 KEY A, BLACK, W/ CPA 160111-6065 A-BLK GCP PLR CPA M R 1 2 KEY A, BLACK, W/ CPA 160111-6066 A-BLK GCP PLR CPA M R 2 KEY A, BLACK, W/ CPA 160111-6067 A-BLK GCP PLR CPA M R 2 D6 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6068 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 3 4 5 6 D6 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT 160111-6069 A-BLK-ECLIP GCP-ECLIP PLR CPA M R 3 4 5 6 J 7 4 5 6 3 4 5 6 7 3 4 5 6 7 2 8 9 3 1 4 5 6 4 5 6 12 SALEABLE 11 SALEABLE 10 SALEABLE 7 SALEABLE 5 4 5 6 SALEABLE 11 12 SALEABLE 7 12 SALEABLE 7 12 SALEABLE 12 SALEABLE 7 11 7 11 7 8 9 10 9 10 SALEABLE 11 12 SALEABLE SALEABLE 8 1 4 2 2 3 5 4 6 7 6 7 5 5 K SALEABLE 7 2 L BACKSHELL WITHOUT RIBS SALEABLE 7 3 5 1 11 BACKSHELL WITH RIBS SALEABLE 9 1 10 COMMENTS STATUS 7 KEY A, BLACK, W/ CPA, W/ EX. CLIPSLOT K H 1 OPTIONAL ATTATCHMENTS SOLD SEPERATELY J SALEABLE SALEABLE 9 10 7 10 7 10 7 10 7 10 SALEABLE 11 11 12 SALEABLE 12 SALEABLE 12 SALEABLE 12 SALEABLE 11 7 8 9 10 SALEABLE 11 12 H SALEABLE G G F F E E D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE 0 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 0.00000 DIVISIONAL 3 PLACES SYMBOLS B 1:1 ± 0.0000 N 2 PLACES 0.5 ° S = 0 mm TE = 0 O = ± 0.000 ± 0.00 0 PLACES ± 0.00 SE E 1 PLACE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS A FORMAT: TC-tb-prod-D REVISION: A DATE: 2021/08/11 19 18 17 16 15 14 13 12 11 10 9 8 7 PHASE: Design Production CO NO: CO-000000522 DRWN: Srikanth CV CHK'D: Chaitra D APPR: Gurunandan GA INITIAL REVISION: DRWN: Srikanth CV APPR: Gurunandan GA THIRD ANGLE PROJECTION MX150 HYBRID MAT SEAL RCPT CONN ASM 2022-02-16 2022-02-17 2022-02-17 PRODUCT SALES DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2022-02-16 2022-02-17 DRAWING 5 1601110000 MATERIAL NUMBER SERIES D-SIZE 160111 6 B PSD 000 SHEET NUMBER CUSTOMER CHARTED 4 D6 6 OF 7 3 2 1 A