1703403024

12 11 10 9 7 8 5 6 1.00 4 MIN BOARD THICKNESS SEE NOTES 11 AND 12 3 2 1 SEE NOTE 10 17.3 H 16.7 7.5 H 1.2 3.80 PIN A1 G G 16.80 14.85 SEE NOTE 13 F F 11.36 B 8.44 4.40 2X SIGNAL HOLES REF �2.1� 1.35 11X 7.91 1.70 MAX 14.00 (FULLY MATED) B A DOCUMENT STATUS 12 P1 RELEASE DATE 11 2019/02/20 10 8 D ⌖ ⌀0.10 0.35 ⌀ PTH OFFSET BETWEEN DC AND BP HOLE COLUMNS BACKPLANE (REF) (SEE CHART) (12 HOLES PER COLUMN) SEE NOTE 3. C BP PIN A1 DAUGHTERCARD HOLE PATTERN (CONNECTOR SIDE) B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:38:01 9 ⌖ ⌀0.10 UNPLATED HOLES 2X NOTES: 1. MATERIALS: HOUSING - GRAY LIQUID CRYSTAL POLYMER (LCP), GLASS-FILLED, UL94V-0 TERMINALS - HIGH PERFORMANCE COPPER ALLOY 2. FINISH: 30µIN MIN SELECTIVE GOLD IN CONTACT AREA, SELECTIVE TIN ON PCB TAILS. NICKEL OVERALL. 3. REFER TO MOLEX PRODUCT SPEC PS-170540-999 FOR PERFORMANCE SPECIFICATIONS AND ADDITIONAL PCB INFORMATION. 4. EACH SIGNAL WAFER CONTAINS 2 COLUMNS OF TERMINALS. 5. PRODUCT IS PACKAGED PER PK-70873-610. 6. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPEC PS-45499-002. 7. REFER TO MOLEX SALES DRAWING SD-170335-0002 FOR THE MATING HEADERS. 8. REFER TO MOLEX PCB ROUTING GUIDE AS-76060-990 FOR THE ANTIPAD AND ROUTING RECOMMENDATIONS. 9. GROUND PATHS ARE NOT DISCRETE CIRCUITS WITHIN CONNECTOR DUE TO PRESENCE OF PLUS CLIP. 10. PART NUMBER 170340-3120 SHOWN ON DRAWING. KEYING FEATURES WILL CHANGE WITH COLUMN SIZE. 11. MINIMUM BOARD THICKNESS IS 1.00 mm FOR COMPLIANT PIN FUNCTIONALITY. 12. WHEN USING MOLEX SUPPLIED #2-32 SCREW 73726-0000, THE MAXIMUM BOARD THICKNESS IS 4.4 mm. 13. MARKING: LOCATED APPROXIMATELY AS SHOWN. PART NUMBER AND DATE CODE. FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 PIN A1 ⌀2.45 ±0.04 KEY SHOWN IN POSITION "A" E ROW M ROW L ROW K ROW J ROW H ROW G ROW F ROW E ROW D ROW C ROW B ROW A 14.85 D C KEEP-OUT ZONE 5.96 16.80 19.0 1.90 GROUND HOLE SEE NOTE 9 BP ROW A A E 1.06 7 6 5 EC NO: 612222 DRWN: AAPPARAOTHAK CHK'D: TMARRI APPR: BOKOK INITIAL REVISION: DRWN: TELO APPR: TELO THIRD ANGLE PROJECTION 2018/11/08 2019/02/19 2019/02/20 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2010/05/12 2011/01/25 DRAWING SERIES C-SIZE 170340 4 IMPACT 4-PAIR 85-OHM DAUGHTERCARD SIGNAL GUIDE LEFT SALES DRAWING 3 SD-170340-0002 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 B5 SHEET NUMBER GENERAL MARKET 1 OF 2 1 A 12 11 H G F 10 9 7 8 6 5 4 3 2 1 H MATERIAL NUMBER # OF COLUMNS # OF DIFF PAIR DIM "A" MAX DIM "B" 170340-3*06 6 24 19.00 9.50 170340-3*08 8 32 22.80 13.30 170340-3*10 10 40 26.60 17.10 170340-3*12 12 48 30.40 20.90 170340-3*14 14 56 34.20 24.70 170340-3*16 16 64 38.00 28.50 170340-3*36 6 24 19.00 9.50 170340-3*38 8 32 22.80 13.30 170340-3*20 10 40 26.60 17.10 170340-3*22 12 48 30.40 20.90 170340-3*24 14 56 34.20 24.70 170340-3*26 16 64 38.00 28.50 PTH ⌀ 170340- **** # OF COLUMNS 06 = 6 COL 0.46 PTH 08 = 8 COL 0.46 PTH 10 = 10 COL 0.46 PTH 12 = 12 COL 0.46 PTH 14 = 14 COL 0.46 PTH 16 = 16 COL 0.46 PTH 20 = 10 COL 0.39 PTH 22 = 12 COL 0.39 PTH 24 = 14 COL 0.39 PTH 26 = 16 COL 0.39 PTH 36 = 6 COL 0.39 PTH 38 = 8 COL 0.39 PTH MODULE AND TAIL PLATING TYPE 3 = LEFT GUIDED LEAD-FREE 0.46 ±0.05 POLARIZATION KEY ORIENTATION 0 = NO KEY 1=A 5=E 2=B 6=F 3=C 7=G 4=D 8=H 0.39 ±0.05 G F E E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 11 2019/02/20 10 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:38:01 9 8 7 6 5 EC NO: 612222 DRWN: AAPPARAOTHAK CHK'D: TMARRI APPR: BOKOK INITIAL REVISION: DRWN: TELO APPR: TELO THIRD ANGLE PROJECTION 2018/11/08 2019/02/19 2019/02/20 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2010/05/12 2011/01/25 DRAWING SERIES C-SIZE 170340 4 IMPACT 4-PAIR 85-OHM DAUGHTERCARD SIGNAL GUIDE LEFT SALES DRAWING 3 SD-170340-0002 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 B5 SHEET NUMBER GENERAL MARKET 2 OF 2 1 A