1703903009

12 11 10 9 8 7 5 6 4 3 2 1 KEY SHOWN IN POSITION A H H D G G A PIN A1 F F H STACK HEIGHT C B 8.44 SEE NOTE 12 ⌖ ⌀0.10 E 1.06 E 4.40 3X ⌀4.38 ±0.04 ⌖ ⌀0.10 1.90 UNPLATED HOLE ⌀0.39 ±0.05 (12 HOLES PER COLUMN) 1.35 11X ROW M ROW L ROW K ROW J ROW H ROW G ROW F ROW E ROW D ROW C ROW B ROW A D 4.45 20.15 14.85 11.42 C B A NOTES: 1. MATERIALS: HOUSING - LIQUID CRYSTAL POLYMER (LCP) GLASS-FILLED, UL94V-0 TERMINALS - HIGH PERFORMANCE COPPER ALLOY 2. FINISH: 30 µINCH MIN GOLD IN CONTACT AREA. SELECTIVE MATTE TIN ON PCB TAILS. NICKEL OVERALL. 3. REFER TO MOLEX PRODUCT SPECIFICATION PS-76060-999 FOR PERFORMANCE SPECIFICATIONS AND ADDITIONAL PCB INFORMATION. 4. EACH SIGNAL WAFER CONTAINS 2 COLUMNS OF TERMINALS. 5. SEE CHART FOR PACKAGING SPECIFICATIONS. 6. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPEC PS-45499-002. 7. REFER TO MOLEX SALES DRAWING SD-170335-0002 FOR THE MATING HEADERS 8. REFER TO MOLEX ROUTING PCB ROUTING GUIDE AS-76060-990 FOR ANTIPAD AND ROUTING RECOMMENDATIONS. 9. GROUND PATHS ARE NOT DISCRETE WITHIN CONNECTOR DUE TO PRESENCE OF PLUS CLIP. 10. PART NUMBER 170390-3130 SHOWN ON DRAWING. KEYING FEATURES WILL CHANGE WITH COLUMN SIZE. 11. FOR SCREW PART NUMBER AND FUNCTIONAL BOARD THICKNESS REFER TO CHART ON SHEET 2. IN ORDER TO ACCOMMODATE ALTERNATE BOARD THICKNESSES PLEASE CONTACT MOLEX. 12. MARKING: LOCATED APPROXIMATELY AS SHOWN. PART NUMBER AND DATE CODE. DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 11 2019/08/16 10 2.65 C 2.30 ⌖ ⌀0.10 SIGNAL HOLES REF KEEP-OUT ZONE ⌀2.45 ±0.04 UNPLATED HOLES 2X VERTICAL RECEPTACLE HOLE PATTERN (CONNECTOR SIDE) B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM NTS CURRENT REV DESC: ADD PN1703903*03 GENERAL TOLERANCES (UNLESS SPECIFIED) 08:02:37 8 GROUND HOLE REF PIN A1 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 9 D 7 6 5 EC NO: 620149 DRWN: SKRISHNAMURT CHK'D: SHONG APPR: SHONG INITIAL REVISION: DRWN: JJONIAK APPR: JLAURX THIRD ANGLE PROJECTION 2019/06/04 2019/08/16 2019/08/16 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2011/01/20 2013/04/05 DRAWING SERIES C-SIZE 170390 4 IMPACT 4-PAIR 85-OHM LEFT GUIDE MEZZANINE SALES DRAWING 3 SD-170390-0002 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 B4 SHEET NUMBER GENERAL MARKET 1 OF 2 1 A 12 11 10 9 7 8 6 5 4 3 2 1 PART NUMBER CHART G F D 170390-3*03 6 24 19.0 9.5 170390-3*08 8 32 22.8 13.3 170390-3*00 10 40 26.6 17.1 170390-3*02 12 48 30.4 20.9 170390-3*07 14 56 34.2 24.7 170390-3*06 16 64 38.0 28.5 170390-3*09 18 72 41.8 32.3 MATERIAL NUMBER # OF COLUMNS 170390-3*28 8 32 22.8 13.3 170390-3*20 10 40 26.6 17.1 170390-3*22 12 48 30.4 20.9 DIM "A" # OF DIFF PAIRS MAX DIM "B" DIM "A" # OF DIFF PAIRS MAX DIM "B" 170390-3*27 14 56 34.2 24.7 170390-3*26 16 64 38.0 28.5 170390-3*29 18 72 41.8 32.3 # OF COLUMNS 170390-3*38 8 32 22.8 13.3 170390-3*30 10 40 26.6 17.1 170390-3*32 12 48 30.4 20.9 DIM "A" # OF DIFF PAIRS MAX DIM "B" 15.36 19.41 170390-3*37 14 56 34.2 24.7 170390-3*36 16 64 38.0 28.5 170390-3*39 18 72 41.8 32.3 SCREW P/N PK-70873-4001 73726-0005 FUNCTIONAL BOARD THICKNESS 2.0mm TO 3.0mm DIM "C" DIM "D" PACKAGING SPEC SCREW P/N FUNCTIONAL BOARD THICKNESS 22.36 19.41 PK-70873-4002 73726-0000 1.0mm TO 5.0mm DIM "D" DIM "C" 34.36 C PACKAGING SPEC 20.65 PACKAGING SPEC PK-70873-0044 SCREW P/N 73726-0000 FUNCTIONAL BOARD THICKNESS 1.0mm TO 5.0mm H G F E 0.35 OFFSET BETWEEN FEMALE AND MALE HOLE PATTERNS BACKPLANE (SERIES 170335) 37mm STACK HEIGHT (DIM H) MATERIAL NUMBER DIM "D" DIM "C" 25mm STACK HEIGHT (DIM H) E # OF COLUMNS 18mm STACK HEIGHT (DIM H) H MATERIAL NUMBER D VERTICAL FEMALE C PART NUMBER LOGIC B B 170390-**** MODULE AND TAIL PLATING TYPE 3 = GUIDE LEFT, MATTE TIN KEY ORIENTATION 0 = NO KEY 1=A 5=E 2=B 6=F 3=C 7=G 4=D 8=H A DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 11 2019/08/16 10 08:02:37 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION # OF COLUMNS 3 = 6 COL 8 = 8 COL 0 = 10 COL 2 = 12 COL 7 = 14 COL 6 = 16 COL 9 = 18 COL STACK HEIGHT (H) 0 = 18mm 2 = 25mm 3 = 37mm 9 8 DIMENSION UNITS SCALE MM NTS CURRENT REV DESC: ADD PN1703903*03 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 6 5 EC NO: 620149 DRWN: SKRISHNAMURT CHK'D: SHONG APPR: SHONG INITIAL REVISION: DRWN: JJONIAK APPR: JLAURX THIRD ANGLE PROJECTION 2019/06/04 2019/08/16 2019/08/16 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2011/01/20 2013/04/05 DRAWING SERIES C-SIZE 170390 4 IMPACT 4-PAIR 85-OHM LEFT GUIDE MEZZANINE SALES DRAWING 3 SD-170390-0002 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 B4 SHEET NUMBER GENERAL MARKET 2 OF 2 1 A