1718131008

12 11 10 9 8 5.11 .201 AT DATUM -DH G 2.41 .095 REF 3 CIRCUIT NO. 1 SEE NOTE 11 GOLD G SEE NOTE 9 3.96±0.05 .156±.002 TYP NON-ACCUMULATIVE -D- 3.30±0.25 .130±.010 10.01±0.51 .394±.020 OPTIONAL VOIDED CIRCUIT SEE CHART FOR LOCATION CENTERLINE OF PIN AT TIP NOT TO VARY FROM CENTERLINE OF PIN AT DATUM -E- BY MORE THAN 0.13/.005 IN ANY DIRECTION. 1.73±0.05 DIA TYP .068±.002 5.08 .200 MIN -E- TIN E CIRCUIT DIM. A SIZE 7.77 2 .306 11.73 3 .462 DETAIL Z SCALE 8:1 16.10 .634 REF 8 9 10 3. PRODUCT SPECIFICATION: PS-171813-0001, PS-171813-0002 4. PACKAGING INFORMATION: SEE CHARTS. 5. SOLDERABILITY: PER SMES-152. 6. PIN PUSH-OUT FORCE: PRIOR TO SOLDERING, A 3 LB. MINIMUM FORCE IN EITHER DIRECTION 7. PARTS ARE STACKABLE END TO END ON 3.96/.156 CENTERS. 8. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 9. SLOTS ON BACKWALL ARE BETWEEN CIRCUITS. SEE CHART FOR LOCATION. 10. FEATURE MAY OR MAY NOT EXTEND ACROSS THE ENTIRE FACE OF THE PART. SEE DETAIL Z. 11. CIRCUIT 1 DESIGNATION IS USED TO DEFINE VOID LOCATION. CIRCUIT 1 MAY OR MAY NOT LINE UP WITH CIRCUIT 1 ON THE MATING HOUSING. 12. THE PARTS LISTED ON THIS DRAWING ARE CONSTRUCTED TO MEET THE REQUIREMENT FOR DIRECT SUPPORT OF UNINSULATED LIVE PARTS AS DESCRIBED IN UL508C. FORMAT: Eng-lega-master-tb-prod-C REVISION: C DATE: 2016/02/04 12 RELEASE DATE 11 10 9 8 OPTIONAL PICK AND PLACE CAP FOR TAPE AND REEL PACKAGING 11 12 15.70 .618 19.66 .774 23.62 .930 27.58 1.086 31.55 1.242 35.51 1.398 39.47 1.554 43.43 1.710 47.40 1.866 DIM. B SLOT LOCATION BETWEEN CIRCUITS 3.96±0.05 .156±.002 7.92±0.10 .312±.004 E NONE NONE 11.89 ± 0.15 .468 ± .006 15.85 ± 0.15 .624 ± .006 19.81 ± 0.18 .780 ± .007 23.77 ± 0.18 .936 ± .007 27.74 ± 0.20 1.092 ± .008 31.70 ± 0.20 1.248 ± .008 35.66 ± 0.23 1.404 ± .009 39.62 ± 0.23 1.560 ± .009 43.59 ± 0.25 1.716 ± .010 NONE D NONE 3&4 4&5 4&5 C 5&6 5&6 6&7 4&5 8&9 B 2017/02/03 2017/02/06 2017/02/09 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 7 6 B1 5 REV RELEASE STATUS 7 113073 BAPPELDORN JBELL FSMITH A 6 EC NO: DRWN: CHK'D: APPR: B 5 ADD NOTE 12 C 4 NOTES: 1. MATERIAL: HOUSING: NYLON, UL94V-1, COLOR: BLACK PINS: BRASS 2. FINISH: (197-TIN) = OVERALL REFLOWED MATTE TIN: 0.00152/.000060 MIN. OVER 0.00127/.000050 MIN. NICKEL OVERALL. (208) = SELECT GOLD: 0.00038/.000015 MIN, SELECT MATTE TIN: 0.00254/.000100 MIN, BOTH OVER 0.00127/.000050 MIN NICKEL. (228) = SELECT GOLD: 0.00076/.000030 MIN, SELECT MATTE TIN: 0.00254/.000100 MIN, BOTH OVER 0.00127/.000050 MIN NICKEL. F RECOMMENDED P.C.BOARD LAYOUT 7.42 .292 REF 6.10 .200 REF D 1 CENTERLINE OF PIN AT TIP NOT TO VARY FROM CENTERLINE OF PIN AT DATUM -D- BY MORE THAN 0.20/.008 IN ANY DIRECTION. SEE DETAIL Z SEE NOTE 10 TYP REF 2 1.91 .075 AT -D- 3.96 .156 REF. TYP. BETWEEN ANY 2 CONSECUTIVE CKTS. AT -D- SEE NOTE 10 AND DETAIL Z F 4 H DIM. B M ±0.38 ±.015 TYP P 5 6 DIM. A REF FEATURE MAY BE ON EITHER SIDE OF THE PART 11.33±0.51 .446±.020 7 DIMENSION UNITS GENERAL TOLERANCES (UNLESS SPECIFIED) MM/IN INCH MM SCALE DRWN BY 4 PLACES ± ± MKIPPER 3 PLACES ± ± 0.01 CHK'D BY 2 PLACES ± 0.25 ± 0.015 SSOUSEK 1 PLACES ± 0.38 ± APPR BY 0 PLACES ± ± FSMITH ANGULAR TOL ± 0.5 DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 4:1 DATE 2012/09/13 DATE 2012/09/13 KK RPC 156 FRICTION LOCK VERTICAL HEADER ASSEMBLY SOLID BODY W/O PEGS DATE 2013/06/11 THIRD ANGLE PROJECTION C PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 171813 SEE CHART GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER DOCUMENT NUMBER 3 CUSTOMER SD-171813-0001 2 PSD 000 1 1 OF * A OPTIONS 171813 Group 171813-0002/0012 Group 171813-1002/1012 Group 171813-2002/2012 Plating: 197 – TIN Plating: 208 – 15 GOLD Plating: 228 – 30 GOLD Pin Length L 17.02 / .670 Pin Length L 17.02 / .670 Pin Length L 17.02 / .670 Mating 11.38 / .448 Mating 11.38 / .448 Mating 11.38 / .448 Gold Loc G N/A Gold Loc G 6.10 / .240 Gold Loc G 6.10 / .240 PC Tail P 2.37 / .092 PC Tail P 2.37 / .092 PC Tail P 2.37 / .092 Tin Loc T OVERALL Tin Loc T 5.08 / .200 Tin Loc T 5.08 / .200 NONE PK-41791-001 BULK Voided Ckts NONE PK-41791-001 BULK Voided Ckts M Voided Ckts Pack Per M Pack Per Pack Per M NONE PK-41791-001 BULK Ckts Material No Material No Material No 2 171813-0002 171813-1002 171813-2002 3 171813-0003 171813-1003 171813-2003 4 171813-0004 171813-1004 171813-2004 5 171813-0005 171813-1005 171813-2005 6 171813-0006 171813-1006 171813-2006 7 171813-0007 171813-1007 171813-2007 8 171813-0008 171813-1008 171813-2008 9 171813-0009 171813-1009 171813-2009 10 171813-0010 171813-1010 171813-2010 11 171813-0011 171813-1011 171813-2011 12 171813-0012 171813-1012 171813-2012 REV: A5 ECR/ECN INFORMATION EC NO.: DATE: TITLE: KK RPC 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS UCP2016-1946 10/23/2017 DOCUMENT NUMBER: SD-171813-0001 CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL SHEET No. -2APPROVED BY: FSMITH-ROEMER TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 171813 Group 171813-0102/0112 Group 171813-1102/1112 Group Plating: 197 – TIN Plating: 208 – 15 GOLD Plating: Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G N/A Gold Loc G 6.86 / .270 Gold Loc G PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P Tin Loc T OVERALL Tin Loc T 4.06 / .160 Tin Loc T NONE PK-41791-001 BULK Voided Ckts NONE PK-41791-001 BULK Voided Ckts M Voided Ckts Pack Per M Pack Per Ckts Material No Material No 2 171813-0102 171813-1102 3 171813-0103 171813-1103 4 171813-0104 171813-1104 5 171813-0105 171813-1105 6 171813-0106 171813-1106 7 171813-0107 171813-1107 8 171813-0108 171813-1108 9 171813-0109 171813-1109 10 171813-0110 171813-1110 11 171813-0111 171813-1111 12 171813-0112 171813-1112 REV: A5 ECR/ECN INFORMATION EC NO.: DATE: TITLE: 10/23/2017 SD-171813-0001 Pack Per Material No KK RPC 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS UCP2016-1946 DOCUMENT NUMBER: M CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL SHEET No. -3APPROVED BY: FSMITH-ROEMER TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 171813 Group 171813-3002/3012 Group 171813-4002/4012 Group Plating: 197 – TIN Plating: 208 – 15 GOLD Plating: Pin Length L 17.02 / .670 Pin Length L 17.02 / .670 Pin Length L Mating 11.38 / .448 Mating 11.38 / .448 Mating Gold Loc G N/A Gold Loc G 6.10 / .240 Gold Loc G PC Tail P 2.37 / .092 PC Tail P 2.37 / .092 PC Tail P Tin Loc T OVERALL Tin Loc T 5.08 / .200 Tin Loc T NONE PK-171813-0001 TAPE AND REEL W/CAP Voided Ckts NONE PK-171813-0001 TAPE AND REEL W/CAP Voided Ckts M Voided Ckts Pack Per M Pack Per Ckts Material No Material No 2 171813-3002 171813-4002 3 171813-3003 171813-4003 4 171813-3004 171813-4004 5 171813-3005 171813-4005 6 171813-3006 171813-4006 7 171813-3007 171813-4007 8 171813-3008 171813-4008 9 171813-3009 171813-4009 10 171813-3010 171813-4010 11 171813-3011 171813-4011 12 171813-3012 171813-4012 REV: A5 ECR/ECN INFORMATION EC NO.: DATE: TITLE: 10/23/2017 SD-171813-0001 Pack Per Material No KK RPC 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS UCP2016-1946 DOCUMENT NUMBER: M CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL SHEET No. -4APPROVED BY: FSMITH-ROEMER TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 171813 Group Group Group Group 171813-9994 Plating: Plating: Plating: Plating: 197 – TIN Pin Length L Pin Length L Pin Length L Pin Length L 18.29 / .720 Mating Mating Mating Mating 11.43 / .450 M M M M Gold Loc G Gold Loc G Gold Loc G Gold Loc G PC Tail P PC Tail P PC Tail P PC Tail P 3.56 / .140 Tin Loc T Tin Loc T Tin Loc T Tin Loc T OVERALL Voided Ckts Voided Ckts Voided Ckts Voided Ckts Pack Per Pack Per Pack Per Pack Per Ckts Material No Material No Material No N/A 3 PK-41791-001 BULK Material No 2 3 4 5 171813-9994 6 7 8 9 10 11 12 REV: A5 ECR/ECN INFORMATION EC NO.: DATE: TITLE: KK RPC 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS UCP2016-1946 10/23/2017 DOCUMENT NUMBER: SD-171813-0001 CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL SHEET No. -5APPROVED BY: FSMITH-ROEMER TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 171813 Group 171813-9995 Group 171813-9996 Group 171813-9997 Group 171813-9998 Plating: 208 – 15 GOLD Plating: 197 – TIN Plating: 197 – TIN Plating: 197 – TIN Pin Length L 17.02 / .670 Pin Length L 17.02 / .670 Pin Length L 17.02 / .670 Pin Length L 18.29 / .720 Mating 11.38 / .448 Mating 11.38 / .448 Mating 11.38 / .448 Mating 11.43 / .450 Gold Loc G 6.10 / .240 Gold Loc G N/A Gold Loc G N/A Gold Loc G PC Tail P 2.37 / .092 PC Tail P 2.37 / .092 PC Tail P 2.37 / .092 PC Tail P 3.56 / .140 Tin Loc T 5.08 / .200 Tin Loc T OVERALL Tin Loc T OVERALL Tin Loc T OVERALL Voided Ckts 3 Voided Ckts Voided Ckts PK-41791-001 BULK Pack Per 2, 4, 6 PK-41791-001 BULK Voided Ckts Pack Per 2, 4 PK-41791-001 BULK Ckts M Material No M Pack Per Material No M Pack Per Material No M N/A 2 PK-41791-001 BULK Material No 2 3 171813-9998 4 5 171813-9995 171813-9996 6 7 171813-9997 8 9 10 11 12 REV: A5 ECR/ECN INFORMATION EC NO.: DATE: TITLE: KK RPC 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS UCP2016-1946 10/23/2017 DOCUMENT NUMBER: SD-171813-0001 CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL SHEET No. -6APPROVED BY: FSMITH-ROEMER TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC