1718140008

12 11 10 9 7 8 5 6 4 3 -E- 5.11 .201 2.41 .095 REF H GOLD TYP M ±±0.38 .015 SEE DETAIL Z SEE NOTE 11 3.30 REF .130 G -D- CENTERLINE OF PIN AT TIP NOT TO VARY FROM CENTERLINE OF PIN AT DATUM -E- BY MORE THAN 0.20 / .008 IN ANY DIRECTION. F TIN SEE NOTE 11 AND DETAIL Z 10.01±0.51 .394±.020 F P REF. CIRCUIT DIM. A SIZE 7.77 2 .306 11.73 3 .462 15.70 4 .618 19.66 5 .774 23.62 6 .930 27.58 7 1.086 31.55 8 1.242 35.51 9 1.398 39.47 10 1.554 43.43 11 1.710 47.40 12 1.866 DETAIL Z SCALE 8:1 NON-ACCUMULATIVE 1.73±0.05 DIA TYP .068±.002 FORMAT: Eng-lega-master-tb-prod-C REVISION: C DATE: 2016/02/04 12 11 9 8 0 = 0 = 0 = 0 7 6 0 2017/02/03 2017/02/06 2017/02/09 = = C 10 SLOT LOCATION BETWEEN CIRCUITS DIM. B 3.96±0.05 .156±.002 7.92±0.10 .312±.004 11.89±0.15 .468±.006 15.85±0.15 .624±.006 19.81±0.18 .780±.007 23.77±0.18 .936±.007 27.74±0.20 1.092±.008 31.70±0.20 1.248±.008 35.66±0.23 1.404±.009 39.62±0.23 1.560±.009 43.59±0.25 1.716±.010 E NONE NONE NONE D NONE 3&4 4&5 4&5 C 5&6 5&6 6&7 4&5 8&9 B QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS = 0 = 0 = 0 B1 5 REV RELEASE DATE PCB LAYOUT: COMPONENT SIDE 113073 BAPPELDORN JBELL FSMITH 3. PRODUCT SPECIFICATION: PS-171813-0001, PS-171813-0002 4. PACKAGING INFORMATION: SEE CHART 5. SOLDERABILITY: PER SMES-152. 6. PIN PUSH-OUT FORCE: PRIOR TO SOLDERING, A 3 LB. MINIMUM FORCE IN EITHER DIRECTION 7. PARTS ARE STACKABLE END TO END ON 3.96/.156 CENTERS. 8. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 9. SLOTS ON BACKWALL ARE BETWEEN CIRCUITS. SEE CHART FOR LOCATION. 10. CIRCUIT 1 DESIGNATION IS USED TO DEFINE VOID LOCATION. CIRCUIT 1 MAY OR MAY NOT LINE UP WITH CIRCUIT 1 ON THE MATING HOUSING. 11. FEATURE MAY OR MAY NOT EXTEND ACROSS THE ENTIRE FACE OF THE PART. SEE DETAIL Z. 12. THE PARTS LISTED ON THIS DRAWING ARE CONSTRUCTED TO MEET THE REQUIREMENT FOR DIRECT SUPPORT OF UNINSULATED LIVE PARTS AS DESCRIBED IN UL508C. RELEASE STATUS TYP EC NO: DRWN: CHK'D: APPR: A 3.96±0.05 .156±.002 ADD NOTE 12 B NOTES: 1. MATERIAL: HOUSING: NYLON, UL94V-1, COLOR: BLACK PINS: BRASS 2. FINISH: (197) = OVERALL REFLOWED MATTE TIN: 0.00152/.000060 MIN. OVER 0.00127/.000050 MIN. NICKEL OVERALL. (208) = SELECT GOLD: 0.00038/.000015 MIN, SELECT MATTE TIN: 0.00254/.000100 MIN, BOTH OVER 0.00127/.000050 MIN NICKEL. (228) = SELECT GOLD: 0.00076/.000030 MIN, SELECT MATTE TIN: 0.00254/.000100 MIN, BOTH OVER 0.00127/.000050 MIN NICKEL. CIRCUIT 1 SEE NOTE 10 OPTIONAL VOIDED CIRCUIT SEE CHART FOR LOCATIONS E C H TYP Y ±±0.25 .010 FEATURE MAY BE ON EITHER SIDE OF THE PART D 1.91 AT -D.075 SEE NOTE 9 11.33±0.51 .446±.020 G 1 DIM. A REF DIM. B 3.96 REF .156 TYP. BETWEEN ANY 2 CONSECUTIVE CIRCUITS AT DATUM -D- CENTERLINE OF PIN AT TIP NOT TO VARY FROM CENTERLINE OF PIN AT DATUM -D- BY MORE THAN 0.20 / .008 IN ANY DIRECTION. AT DATUM -D- 2 GENERAL TOLERANCES (UNLESS SPECIFIED) MM/IN INCH MM DRWN BY 4 PLACES ± ± MKIPPER 3 PLACES ± ± 0.01 CHK'D BY 2 PLACES ± 0.25 ± 0.015 SSOUSEK 1 PLACES ± 0.38 ± APPR BY 0 PLACES ± ± FSMITH ANGULAR TOL ± 0.5 DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 4:1 DATE 2012/09/14 KK RPC .156 HEADER ASS'Y FRICTION LOCK RIGHT ANGLE W/O PEGS DATE 2012/09/14 DATE 2013/06/11 THIRD ANGLE PROJECTION C PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 171814 SEE CHART GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER DOCUMENT NUMBER 3 CUSTOMER SD-171814-0001 2 PSD 000 1 1 OF * A 171814 Group 171814-0002/0012 Group 171814-1002/1012 Group 171814-2002/2012 Plating: 197 – TIN Plating: 208 – 15 GOLD Plating: 228 – 30 GOLD OPTIONS Mating 11.33 / .446 Mating 11.33 / .446 Mating Gold Loc G M N/A Gold Loc G 6.85 / .270 Gold Loc G 6.85 / .270 Height Y 5.41 / .213 Height Y 5.41 / .213 Height Y 5.41 / .213 PC Tail P 2.54/ .100 PC Tail P 2.54/ .100 PC Tail P 2.54/ .100 Tin Loc T OVERALL Tin Loc T 5.08 / .200 Tin Loc T 5.08 / .200 NONE PK-41792-002 BULK Voided Ckts NONE PK-41792-002 BULK Voided Ckts Voided Ckts Pack Per M Pack Per Pack Per M 11.33 / .446 NONE PK-41792-002 BULK Ckts Material No Material No Material No 2 171814-0002 171814-1002 171814-2002 3 171814-0003 171814-1003 171814-2003 4 171814-0004 171814-1004 171814-2004 5 171814-0005 171814-1005 171814-2005 6 171814-0006 171814-1006 171814-2006 7 171814-0007 171814-1007 171814-2007 8 171814-0008 171814-1008 171814-2008 9 171814-0009 171814-1009 171814-2009 10 171814-0010 171814-1010 171814-2010 11 171814-0011 171814-1011 171814-2011 12 171814-0012 171814-1012 171814-2012 REV: A5 ECR/ECN INFORMATION: TITLE: KK RPC 156 HEADER ASSEMBLY FRICTION LOCK RIGHT ANGLE W/O PEGS EC No.: DATE: 11/19/2020 DOCUMENT NUMBER: SD-171814-0001 CREATED / REVISED BY: CHECKED BY: SS06 YVENKATESWAR SHEET No. -2APPROVED BY: ISHWARG TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC 171814 Group 171814-0102/0112 Group 171814-1104 Group Plating: 197 – TIN Plating: 208 – 15 GOLD Plating: OPTIONS Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G M N/A Gold Loc G 6.85 / .270 Gold Loc G Height Y 5.41 / .213 Height Y 5.41 / .213 Height PC Tail P 3.96/ .156 PC Tail P 3.96/ .156 PC Tail P Tin Loc T OVERALL Tin Loc T 5.08 / .200 Tin Loc T NONE PK-41792-002 BULK Voided Ckts NONE PK-41792-002 BULK Voided Ckts Voided Ckts Pack Per Ckts Material No 2 171814-0102 3 171814-0103 4 171814-0104 5 171814-0105 6 171814-0106 7 171814-0107 8 171814-0108 9 171814-0109 10 171814-0110 11 171814-0111 12 171814-0112 REV: A5 ECR/ECN INFORMATION: M Pack Per Material No 171814-1104 TITLE: KK RPC 156 HEADER ASSEMBLY FRICTION LOCK RIGHT ANGLE W/O PEGS 11/19/2020 DOCUMENT NUMBER: SD-171814-0001 Y Pack Per Material No EC No.: DATE: M CREATED / REVISED BY: CHECKED BY: SS06 YVENKATESWAR SHEET No. -3APPROVED BY: ISHWARG TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC 171814 Group 171814-3002/3012 Group 171814-4002/4012 Group Plating: 197 – TIN Plating: 208 – 15 GOLD Plating: OPTIONS Mating 11.33 / .446 Mating 11.33 / .446 Mating Gold Loc G M N/A Gold Loc G 6.85 / .270 Gold Loc G Height Y 5.41 / .213 Height Y 5.41 / .213 Height PC Tail P 2.54/ .100 PC Tail P 2.54/ .100 PC Tail P Tin Loc T OVERALL Tin Loc T 5.08 / .200 Tin Loc T NONE PK-171814-0001 TAPE AND REEL Voided Ckts NONE PK-171814-0001 TAPE AND REEL Voided Ckts Voided Ckts Pack Per M Pack Per Ckts Material No Material No 2 171814-3002 171814-4002 3 171814-3003 171814-4003 4 171814-3004 171814-4004 5 171814-3005 171814-4005 6 171814-3006 171814-4006 7 171814-3007 171814-4007 8 171814-3008 171814-4008 9 171814-3009 171814-4009 10 171814-3010 171814-4010 11 171814-3011 171814-4011 12 171814-3012 171814-4012 REV: A5 ECR/ECN INFORMATION: TITLE: SD-171814-0001 Pack Per KK RPC 156 HEADER ASSEMBLY FRICTION LOCK RIGHT ANGLE W/O PEGS 11/19/2020 DOCUMENT NUMBER: Y Material No EC No.: DATE: M CREATED / REVISED BY: CHECKED BY: SS06 YVENKATESWAR SHEET No. -4APPROVED BY: ISHWARG TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC 171814 Group 171814-9999 Group 171814-7002/7012 Group 171814-7105 Plating: 197 – TIN Plating: 228 – 30 GOLD Plating: 228 – 30 GOLD OPTIONS Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G M N/A Gold Loc G 6.85 / .270 Gold Loc G 6.85 / .270 Height Y 5.41 / .213 Height Y 5.41 / .213 Height Y 5.41 / .213 PC Tail P 3.96/ .156 PC Tail P 3.96/ .156 PC Tail P 3.96/ .156 Tin Loc T OVERALL Tin Loc T 5.08 / .200 Tin Loc T 5.08 / .200 3, 5, 7 PK-41792-002 BULK Voided Ckts NONE PK-41792-002 BULK Voided Ckts Voided Ckts Pack Per Ckts Material No M Pack Per Pack Per Material No M 11.43 / .450 2,4 PK-41792-002 BULK Material No 2 3 4 171814-7004 5 171814-7105 6 7 171814-9999 8 9 171814-7009 10 11 12 REV: A5 ECR/ECN INFORMATION: TITLE: KK RPC 156 HEADER ASSEMBLY FRICTION LOCK RIGHT ANGLE W/O PEGS EC No.: DATE: 11/19/2020 DOCUMENT NUMBER: SD-171814-0001 CREATED / REVISED BY: CHECKED BY: SS06 YVENKATESWAR SHEET No. -5APPROVED BY: ISHWARG TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC 171814 Group 171814-9998 Plating: 197 – TIN OPTIONS Mating M 11.33 / .446 Gold Loc G N/A Height Y 5.41 / .213 PC Tail P 2.54/ .100 Tin Loc T OVERALL Voided Ckts 2 PK-41792-002 BULK Pack Per Ckts Material No 2 3 171814-9998 4 5 6 7 8 9 10 11 12 REV: A5 ECR/ECN INFORMATION: TITLE: KK RPC 156 HEADER ASSEMBLY FRICTION LOCK RIGHT ANGLE W/O PEGS EC No.: DATE: 11/19/2020 DOCUMENT NUMBER: SD-171814-0001 CREATED / REVISED BY: CHECKED BY: SS06 YVENKATESWAR SHEET No. -6APPROVED BY: ISHWARG TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC