1718250100

12 11 10 9 8 7 .165±.005 4.19±0.13 H 5 6 4 3 2 1 .080±.004 2.03±0.10 H .325±.005 8.26±0.13 G G LOCK TANG BEAM .262±.004 6.66±0.10 (2-PL) (SEE NOTE 7) .723±.006 18.35±0.15 F F .145±.008 3.69±0.20 E E TPA LOCK TABS NOTES: 1. MATERIAL: .012/(0.30) THICK HSM COPPER. D D 2. FINISH: SELECT SILVER (.000100/0.00254 MIN) .005 MAX CUT-OFF 0.14 TAB & SELECT MATTE TIN (.000100/0.00254 MIN) OVER NICKEL OVERALL. .175 MIN SILVER 4.45 COVERAGE 3. PRODUCT SPECIFICATION: PS-171825-001. 4. PACKAGING: 1718250000-PK. 5. MATES WITH: 171826 MALE CRIMP TMLS, 172042 .210±.018 5.34±0.46 C AND 172043 HDRS. FOR USE IN 172672/44441 RCPT HSGS. C 6. SINGLE CRIMP TO UL1015, 10 OR 12AWG STRANDED COPPER WIRE, REF. .520 13.21 PROGRESSION .209 5.30 REF .442 MIN TIN 11.23 COVERAGE OR SINGLE CRIMP TO 4MM² CU-R4TPE 19x0.53mm STRANDED COPPER WIRE OR 5MM² CU-H1PVC 65X0.32mm STRANDED COPPER WIRE. TINNED WIRE RECOMMENDED. 7. NO PORTION OF ONE LOCK TANG BEAM SHALL TOUCH SCALE 2:1 ANY PORTION OF THE OTHER LOCK TANG BEAM. B B SYMBOLS = 0 = 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 10:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 = 0 A MM ± 3 PLACES ± ± DOCUMENT STATUS 12 P1 RELEASE DATE 11 2019/04/01 10 19:25:43 C 0.25 ± 0.014 ± 0.35 ± 1 PLACE = 0 0 PLACES ± 9 8 7 6 = 0 0.01 2 PLACES ± ANGULAR TOL FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 INCH 4 PLACES ± = 0 = 0 CURRENT REV DESC: ADD PK SPEC ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 613640 DRWN: JEHRISMAN CHK'D: MKIPPER APPR: FSMITH INITIAL REVISION: DRWN: APPR: THIRD ANGLE PROJECTION 2019/03/11 2019/03/25 2019/04/01 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-171825-001 DRAWING SERIES C-SIZE 171825 4 SUPER-SABRE FEMALE CRIMP TERMINAL 3 MATERIAL NUMBER PSD 001 CUSTOMER 1718250100 2 C1 SHEET NUMBER GENERAL MARKET 1 OF 1 1 A