1718561008

10 A B 4.93 .194 7.47 .294 10.01 .394 12.55 .494 15.09 .594 17.63 .694 20.17 .794 22.71 .894 25.25 .994 27.79 1.094 30.33 1.194 2.54 ±0.05 .100 ±.002 5.08 ±0.10 .200 ±.004 7.62 ±0.15 .300 ±.006 10.16 ±0.15 .400 ±.006 12.70 ±0.18 .500 ±.007 15.24 ±0.18 .600 ±.007 17.78 ±0.20 .700 ±.008 20.32 ±0.20 .800 ±.008 22.86 ±0.23 .900 ±.009 25.40 ±0.23 1.000 ±.009 27.94 ±0.25 1.100 ±.010 CKT F 02 03 04 05 06 E 07 08 09 10 11 12 9 7 8 SLOTS LOCATION A REF NONE NONE NONE 4, 5 1.19 TYP .047 4 2.54 TYP .100 AT DATUM -D- 4, 5 3.18 .125 -E- ±0.38 ±.015 E 8.18 .322 P REF 4.57 REF. .180 T TIN RECESSED GATE MAY BE PRESENT ON 2-12 CIRCUIT PARTS LOCATION VARIES OPTIONAL VOIDED CIRCUIT SEE CHART FOR LOCATION D G GOLD L REF -D- 4, 5 8, 9 4, 5 8, 9 3.10 .122 CENTERLINE OF PIN IN AREA 1.3 SHOWN NOT TO VARY FROM CENTERLINE .05 OF PIN AT -E- BY MORE THAN 0.13/.005 IN ANY DIRECTION. B A ALTERNATE ENGRAVING LOCATION (7-12 CKT PARTS ONLY). LOCATION IS DEPENDENT ON TOOLING. NOTES: 1. MATERIAL: HOUSING: NYLON, UL 94V-1, COLOR: BLACK PINS: BRASS 2. FINISH: (197) = OVERALL REFLOWED MATTE TIN: 0.00152/.000060 MIN OVER 0.00127/.000050 MIN NICKEL. (208) = SELECT GOLD: 0.00038/.000015 MIN, SELECT MATTE TIN: 0.00254/.000100 MIN, BOTH OVER 0.00127/.000050 MIN NICKEL. (228) = SELECT GOLD: 0.00076/.000030 MIN, SELECT MATTE TIN: 0.00254/.000100 MIN, BOTH OVER 0.00127/.000050 MIN NICKEL. 3. PRODUCT SPECIFICATION AND PROCESS PARAMETERS: PS-171856-0001, PS-171856-0002 4. PACKAGING INFORMATION: SEE CHART. 5. MATES WITH: 4455, 2695 SERIES. 6. PARTS ARE STACKABLE END TO END ON 2.54/.100 CENTERS. 7. CIRCUIT ONE DESIGNATION IS USED TO DEFINE VOID LOCATION. CIRCUIT ONE MAY OR MAY NOT LINE UP WITH CIRCUIT ONE ON THE MATING HOUSING. 8. PIN PUSHOUT FORCE: 2 LBS MIN. 9. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 10. THE PARTS LISTED ON THIS DRAWING ARE CONSTRUCTED TO MEET THE REQUIREMENT FOR DIRECT SUPPORT OF UNINSULATED LIVE PARTS AS DESCRIBED IN UL508C. DOCUMENT STATUS 10 FORMAT: Eng-lega-master-tb-prod-B REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 9 2020/02/27 10:16:56 GROOVE MAY BE PRESENT (BOTH SIDES). GEOMETRY IS TOOL DEPENDENT AND MAY BE SLIGHTLY DIFFERENT THAN SHOWN. B 12.04 REF. .474 ±0.05 ±.002 C 2.54 ±.05 .100 ±.002 1.14 ±.05 HOLE TYP .045 ±.002 OPTIONAL PICK AND PLACE CAP FOR TAPE AND REEL PACKAGING PCB LAYOUT: COMPONENT SIDE B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM/IN 4:1 CURRENT REV DESC: ADDED NEW PN 1718566005 GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± INCH ± 3 PLACES ± ± 0.015 2 PLACES ± 0.25 ± ± 0.38 ± 1 PLACE 0 PLACES ± ANGULAR TOL 0.01 ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS MODEL: EM-6373-6 8 D 6.10REF. .240 6.35 .250 CIRCUIT #1 REF, SEE NOTE 7 C 1 1.07 TYP AT -D.042 M 4, 5 2 F SLOTS LOCATED BETWEEN CIRCUITS (SEE CHART) 4, 5 4, 5 3 CENTERLINE OF PIN IN AREA SHOWN NOT TO VARY FROM CENTERLINE OF PIN AT -DBY MORE THAN 0.20/.008 IN ANY DIRECTION. 1.3 .05 B NONE 5 6 7 6 5 4 ° EC NO: 632912 2020/02/03 2020/02/26 2020/02/27 DRWN: MKP CHK'D: SS06 APPR: ISHWARG INITIAL REVISION: DRWN: MKIPPER APPR: FSMITH THIRD ANGLE PROJECTION 2012/11/09 2013/06/11 DRAWING SERIES B-SIZE 171856 3 KK RPC .100 HEADER ASSEMBLY FRICTION LOCK SOLID BODY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-171856-0001 MATERIAL NUMBER SEE CHART 2 PSD 000 CUSTOMER GENERAL MARKET B3 SHEET NUMBER 1 OF 5 1 A 10 F E 9 171856-0002/-0012 197 12.95 / .510 7.44 / .293 N/A 2.34 / .092 OVERALL PK-6373-001 BULK GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: CKTS MATERIAL NUMBER 2 3 4 5 6 7 8 9 10 11 12 171856-0002 171856-0003 171856-0004 171856-0005 171856-0006 171856-0007 171856-0008 171856-0009 171856-0010 171856-0011 171856-0012 MATERIAL NUMBER CKTS 7 8 171856-1002/-1012 208 12.95 / .510 7.44 / .293 3.56 / .140 2.34 / .092 3.43 / .135 PK-6373-001 BULK GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: VOID CKT CKTS MATERIAL NUMBER 2 3 4 5 6 7 8 9 10 11 12 171856-1002 171856-1003 171856-1004 171856-1005 171856-1006 171856-1007 171856-1008 171856-1009 171856-1010 171856-1011 171856-1012 CKTS 5 6 MATERIAL NUMBER 4 CKTS MATERIAL NUMBER 2 3 4 5 6 7 8 9 10 11 12 171856-2002 171856-2003 171856-2004 171856-2005 171856-2006 171856-2007 171856-2008 171856-2009 171856-2010 171856-2011 171856-2012 2 1 171856-2002/-2012 228 12.95 / .510 7.44 / .293 3.56 / .140 2.34 / .092 3.43 / .135 PK-6373-001 BULK GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: VOID CKT 3 CKTS MATERIAL NUMBER F VOID CKT E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM/IN 1:1 CURRENT REV DESC: ADDED NEW PN 1718566005 GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± ± 0.015 2 PLACES ± 0.25 ± ± 0.38 ± 1 PLACE A 0 PLACES ± ANGULAR TOL DOCUMENT STATUS 10 FORMAT: Eng-lega-master-tb-prod-B REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 9 2020/02/27 INCH ± 0.01 ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:16:56 8 7 6 5 4 ° EC NO: 632912 2020/02/03 2020/02/26 2020/02/27 DRWN: MKP CHK'D: SS06 APPR: ISHWARG INITIAL REVISION: DRWN: MKIPPER APPR: FSMITH THIRD ANGLE PROJECTION 2012/11/09 2013/06/11 DRAWING SERIES B-SIZE 171856 3 KK RPC .100 HEADER ASSEMBLY FRICTION LOCK SOLID BODY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-171856-0001 MATERIAL NUMBER SEE CHART 2 PSD 000 CUSTOMER GENERAL MARKET B3 SHEET NUMBER 2 OF 5 1 A 10 F E 9 171856-0102/-0112 197 14.22 / .560 7.49 / .295 N/A 3.56 / .140 OVERALL PK-6373-001 BULK GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: CKTS MATERIAL NUMBER 2 3 4 5 6 7 8 9 10 11 12 171856-0102 171856-0103 171856-0104 171856-0105 171856-0106 171856-0107 171856-0108 171856-0109 171856-0110 171856-0111 171856-0112 MATERIAL NUMBER CKTS 7 8 171856-1102/-1112 208 14.22 / .560 7.49 / .295 3.56 / .140 3.56 / .140 3.43 / .135 PK-6373-001 BULK GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: VOID CKT CKTS MATERIAL NUMBER 2 3 4 5 6 7 8 9 10 11 12 171856-1102 171856-1103 171856-1104 171856-1105 171856-1106 171856-1107 171856-1108 171856-1109 171856-1110 171856-1111 171856-1112 CKTS 5 6 MATERIAL NUMBER 4 3 2 1 GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: VOID CKT CKTS MATERIAL NUMBER F CKTS MATERIAL NUMBER VOID CKT 2 3 4 5 6 7 8 9 10 11 12 E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM/IN 1:1 CURRENT REV DESC: ADDED NEW PN 1718566005 GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± ± 0.015 2 PLACES ± 0.25 ± ± 0.38 ± 1 PLACE A 0 PLACES ± ANGULAR TOL DOCUMENT STATUS 10 FORMAT: Eng-lega-master-tb-prod-B REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 9 2020/02/27 INCH ± 0.01 ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:16:56 8 7 6 5 4 ° EC NO: 632912 2020/02/03 2020/02/26 2020/02/27 DRWN: MKP CHK'D: SS06 APPR: ISHWARG INITIAL REVISION: DRWN: MKIPPER APPR: FSMITH THIRD ANGLE PROJECTION 2012/11/09 2013/06/11 DRAWING SERIES B-SIZE 171856 3 KK RPC .100 HEADER ASSEMBLY FRICTION LOCK SOLID BODY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-171856-0001 MATERIAL NUMBER SEE CHART 2 PSD 000 CUSTOMER GENERAL MARKET B3 SHEET NUMBER 3 OF 5 1 A 10 F 9 171856-3002/-3012 197 12.95 / .510 7.44 / .293 N/A 2.34 / .092 OVERALL GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: E D CKTS MATERIAL NUMBER 2 3 4 5 6 7 8 9 10 11 12 171856-3002 171856-3003 171856-3004 171856-3005 171856-3006 171856-3007 171856-3008 171856-3009 171856-3010 171856-3011 171856-3012 MATERIAL NUMBER CKTS 171856-4002/-4012 208 12.95 / .510 7.44 / .293 3.56 / .140 2.34 / .092 3.43 / .135 VOID CKT CKTS MATERIAL NUMBER 2 3 4 5 6 7 8 9 10 11 12 171856-4002 171856-4003 171856-4004 171856-4005 171856-4006 171856-4007 171856-4008 171856-4009 171856-4010 171856-4011 171856-4012 CKTS MATERIAL NUMBER 4 VOID CKT MATERIAL NUMBER CKTS MATERIAL NUMBER 2 CKTS F PK-171856-0001 TAPE AND REEL W/CAP PACKAGING: VOID CKT 1 171856-6002/-6012 228 12.95 / .510 7.44 / .293 3.56 / .140 2.34 / .092 3.43 / .135 GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: 1718561000-PK TAPE AND REEL W/O CAP PACKAGING: CKTS 3 171856-5002/-5012 208 14.22 / .560 7.49 / .295 3.56 / .140 3.56 / .140 3.43 / .135 GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PK-171856-0001 TAPE AND REEL W/CAP PACKAGING: 5 6 GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PK-171856-0001 TAPE AND REEL W/CAP PACKAGING: 7 8 MATERIAL NUMBER MATERIAL NUMBER CKTS VOID CKT E 4 171856-5004 5 8 171856-6005 171856-5008 D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM/IN 1:1 CURRENT REV DESC: ADDED NEW PN 1718566005 GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± ± 0.015 2 PLACES ± 0.25 ± ± 0.38 ± 1 PLACE A 0 PLACES ± ANGULAR TOL DOCUMENT STATUS 10 FORMAT: Eng-lega-master-tb-prod-B REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 9 2020/02/27 INCH ± 0.01 ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:16:56 8 7 6 5 4 ° EC NO: 632912 2020/02/03 2020/02/26 2020/02/27 DRWN: MKP CHK'D: SS06 APPR: ISHWARG INITIAL REVISION: DRWN: MKIPPER APPR: FSMITH THIRD ANGLE PROJECTION 2012/11/09 2013/06/11 DRAWING SERIES B-SIZE 171856 3 KK RPC .100 HEADER ASSEMBLY FRICTION LOCK SOLID BODY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-171856-0001 MATERIAL NUMBER SEE CHART 2 PSD 000 CUSTOMER GENERAL MARKET B3 SHEET NUMBER 4 OF 5 1 A 10 F 9 171856-9999 197 12.95 / .510 7.44 / .293 N/A 2.34 / .092 OVERALL GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: CKTS MATERIAL NUMBER E CKTS MATERIAL NUMBER VOID CKT 10 171856-9999 2,3,5,6, 8,9 CKTS MATERIAL NUMBER 2 171856-9998 CKTS MATERIAL NUMBER 4 3 2 1 GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PK-6373-001 BULK PACKAGING: 5 6 171856-9998 197 12.19 / .480 7.42 / .292 N/A .60 / .063 OVERALL GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PK-44743-001 TUBE PACKAGING: 7 8 F PACKAGING: VOID CKT CKTS MATERIAL NUMBER CKTS MATERIAL NUMBER VOID CKT E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM/IN 1:1 CURRENT REV DESC: ADDED NEW PN 1718566005 GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± 3 PLACES ± ± 0.015 2 PLACES ± 0.25 ± ± 0.38 ± 1 PLACE A 0 PLACES ± ANGULAR TOL DOCUMENT STATUS 10 FORMAT: Eng-lega-master-tb-prod-B REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 9 2020/02/27 INCH ± 0.01 ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:16:56 8 7 6 5 4 ° EC NO: 632912 2020/02/03 2020/02/26 2020/02/27 DRWN: MKP CHK'D: SS06 APPR: ISHWARG INITIAL REVISION: DRWN: MKIPPER APPR: FSMITH THIRD ANGLE PROJECTION 2012/11/09 2013/06/11 DRAWING SERIES B-SIZE 171856 3 KK RPC .100 HEADER ASSEMBLY FRICTION LOCK SOLID BODY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-171856-0001 MATERIAL NUMBER SEE CHART 2 PSD 000 CUSTOMER GENERAL MARKET B3 SHEET NUMBER 5 OF 5 1 A GROUP: 171856-0002/-0012 PLATING: 197 PIN LENGTH: (L) 12.95 / .510 MATING: (M) 7.44 / .293 DIM. G: N/A PC TAIL: (P) 2.34 / .092 DIM T: OVERALL PACKAGING: PK-6373-001 BULK MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171856-0002 3 171856-0003 4 171856-0004 5 171856-0005 6 171856-0006 7 171856-0007 8 171856-0008 9 171856-0009 10 171856-0010 11 171856-0011 12 171856-0012 REV: B1 ECM INFORMATION: ECM No.: DATE: GROUP: 171856-1002/-1012 PLATING: 208 PIN LENGTH: (L) 12.95 / .510 MATING: (M) 7.44 / .293 DIM. G: 3.56 / .140 PC TAIL: (P) 2.34 / .092 DIM T: 3.43 / .135 PACKAGING: PK-6373-001 BULK MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171856-1002 3 171856-1003 4 171856-1004 5 171856-1005 6 171856-1006 7 171856-1007 8 171856-1008 9 171856-1009 10 171856-1010 11 171856-1011 12 171856-1012 TITLE: GROUP: 171856-2002/-2012 PLATING: 228 PIN LENGTH: (L) 12.95 / .510 MATING: (M) 7.44 / .293 DIM. G: 3.56 / .140 PC TAIL: (P) 2.34 / .092 DIM T: 3.43 / .135 PACKAGING: PK-6373-001 BULK MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171856-2002 3 171856-2003 4 171856-2004 5 171856-2005 6 171856-2006 7 171856-2007 8 171856-2008 9 171856-2009 10 171856-2010 11 171856-2011 12 171856-2012 KK RPC 100 HEADER ASSEMBLY FRICTION LOCK SOLID BODY 602687 8/13/2018 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: SD - 171856 - 0001 SS06 SS06 SHEET No. -2APPROVED BY: ISHWARG TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC GROUP: 171856-0102/-0112 PLATING: 197 PIN LENGTH: (L) 14.22 / .560 MATING: (M) 7.49 / .295 DIM. G: N/A PC TAIL: (P) 3.56 / .140 DIM T: OVERALL PACKAGING: PK-6373-001 BULK MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171856-0102 3 171856-0103 4 171856-0104 5 171856-0105 6 171856-0106 7 171856-0107 8 171856-0108 9 171856-0109 10 171856-0110 11 171856-0111 12 171856-0112 REV: B1 ECM INFORMATION: ECM No.: DATE: GROUP: 171856-1102/-1112 PLATING: 208 PIN LENGTH: (L) 14.22 / .560 MATING: (M) 7.49 / .295 DIM. G: 3.56 / .140 PC TAIL: (P) 3.56 / .140 DIM T: 3.43 / .135 PACKAGING: PK-6373-001 BULK MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171856-1102 3 171856-1103 4 171856-1104 5 171856-1105 6 171856-1106 7 171856-1107 8 171856-1108 9 171856-1109 10 171856-1110 11 171856-1111 12 171856-1112 TITLE: GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT KK RPC 100 HEADER ASSEMBLY FRICTION LOCK SOLID BODY 602687 8/13/2018 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: SD - 171856 - 0001 SS06 SS06 SHEET No. -3APPROVED BY: ISHWARG TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: 171856-3002/-3012 197 12.95 / .510 7.44 / .293 N/A 2.34 / .092 OVERALL PK-171856-0001 PACKAGING: TAPE AND REEL W/CAP MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171856-3002 3 171856-3003 4 171856-3004 5 171856-3005 6 171856-3006 7 171856-3007 8 171856-3008 9 171856-3009 10 171856-3010 11 171856-3011 12 171856-3012 REV: B1 ECM INFORMATION: ECM No.: DATE: GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: 171856-4002/-4012 208 12.95 / .510 7.44 / .293 3.56 / .140 2.34 / .092 3.43 / .135 PK-171856-0001 PACKAGING: TAPE AND REEL W/CAP MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171856-4002 3 171856-4003 4 171856-4004 5 171856-4005 6 171856-4006 7 171856-4007 8 171856-4008 9 171856-4009 10 171856-4010 11 171856-4011 12 171856-4012 TITLE: GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: 171856-5002/-5012 208 14.22 / .560 7.49 / .295 3.56 / .140 3.56 / .140 3.43 / .135 1718561000-PK TAPE PACKAGING: AND REEL W/O CAP MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 4 171856-5004 8 171856-5008 KK RPC 100 HEADER ASSEMBLY FRICTION LOCK SOLID BODY 602687 8/13/2018 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: SD - 171856 - 0001 SS06 SS06 SHEET No. -4APPROVED BY: ISHWARG TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: 171856-9999 197 12.95 / .510 7.44 / .293 N/A 2.34 / .092 OVERALL PK-44743-001 PACKAGING: TUBE MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2,3,5,6, 10 171856-9999 8,9 REV: B1 ECM INFORMATION: ECM No.: DATE: GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: CKTS 2 MATERIAL NUMBER 171856-9998 171856-9998 197 12.19 / .480 7.42 / .292 N/A 1.60 / .063 OVERALL PK-6373-001 BULK MATERIAL VOID CKTS NUMBER CKT TITLE: GROUP: PLATING: PIN LENGTH: (L) MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: CKTS MATERIAL NUMBER CKTS MATERIAL NUMBER KK RPC 100 HEADER ASSEMBLY FRICTION LOCK SOLID BODY 602687 8/13/2018 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: SD - 171856 - 0001 SS06 SS06 VOID CKT SHEET No. -5APPROVED BY: ISHWARG TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC