172253-7123

10 9 FINISHED RECEPTACLE TERMINALS 7 8 5 6 4 3 2 1 PART NUMBER CONTACT PLATING OPTION CRIMP SIZE(AWG) DIM A DIM E DIM F DIM H DIM J 15μ" GOLD 15μ" GOLD 30μ" GOLD 30μ" GOLD PRE-PLATED TIN PRE-PLATED TIN 172253-6011 F 172253-6111 172253-6012 172253-6112 172253-7023 172253-7123 16-18 20-22 16-18 20-22 16-18 20-22 1.41 4.54 4.54 4.54 4.54 5.54 5.54 2.63 2.08 2.63 2.08 2.63 2.08 2.89 2.33 2.89 2.33 2.89 2.33 2.71 2.16 2.71 2.16 2.71 2.16 2.77 2.20 2.77 2.20 2.77 2.20 F 1.41 E E X X D A NOTES: 1. MATERIAL: HIGH CONDUCTIVITY COPPER ALLOY 2. PLATING FINISH: OPTION 1 = 1.02μm(40μin)-3.05μm(120μin) HDT PRE-PLATED. OPTION 2 = 0.38μm(15μin) GOLD CONTACT AREA. 1.52μm(60μin)-2.54μm(100μin) MATTE TIN CRIMP AREA OVER. 1.27μm(50μin)-2.54μm(100μin)DULL NICKEL OVERALL. OPTION 3 = 0.76μm(30μin) GOLD CONTACT AREA. 1.52μm(60μin)-2.54μm(100μin) MATTE TIN CRIMP AREA OVER. 1.27μm(50μin)-2.54μm(100μin)DULL NICKEL OVERALL. 3. PRODUCT SPECIFICATION PS-172323-0001. 4. PACKAGING SPECIFICATION PK-172253-5102. 5. TERMINAL FOR USE WITH RECEPTACLE HOUSING 172256-3***, 172256-4****, 172258-3***, 172258-4****. 6. WHEN TERMINALS ARE INSTALLED IN THE HOUSING THE WIRES ARE TO BE DRESSED IN SUCH WAY TO ALLOW THE TERMINALS TO FLOAT FREELY IN THE POCKET. 7. TERMINAL DESIGNED FOR SINGLE WIRE CRIMP. 8. PART CONFORMS TO CLASS "B" REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 9. APPLICATOR CRIMP TOOL TO USE: 639032800 - FOR 16-18AWG WIRE; 639032900 - FOR 20-22AWG WIRE 9. APPLICATION SPECIFICATION AS-172323-0001. 10.RECOMMENDED INSULATOR 16AWG WIRE - OD 2.00MM MAX. 20AWG WIRE - OD 1.50MM MAX. DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 P1 RELEASE DATE 9 2020/12/28 SECTION X-X SCALE 8:1 SYMBOLS = 0 = 0 = 0 MOLEX LOGO 6 SCALE mm 4:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 5 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 = 0 C 7 SECTION Y-Y SCALE 8:1 B 00:10:06 8 C DIM H DIM E �17.00� B DIM J DIM F ⌀ 1.50 �8.50� C �0.20� Y Y D CUT OFF VESTIGE DETAIL Z SCALE 2:1 �19.87� DIM A DETAIL Z 1 PLACE ± 0 PLACES ± ° 0.25 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 651732 DRWN: GLLI CHK'D: YXZHENG APPR: YXZHENG INITIAL REVISION: DRWN: SCHEN76 APPR: AYIN THIRD ANGLE PROJECTION 2020/12/17 2020/12/28 2020/12/28 ULTRA-FIT RECEPT CRIMP TANGLESS TML PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2018/03/12 2019/02/27 DRAWING SERIES 1722532000 MATERIAL NUMBER A3-SIZE 172253 3 PSD 000 CUSTOMER GENERAL MARKET 2 A2 SHEET NUMBER 1 OF 1 1 A