1722533123

19 18 17 16 FINISHED RECEPTACLE TERMINALS PART NUMBER CONTACT PLATING OPTION L 172253-3023 172253-3123 172253-3011 172253-3111 172253-3012 172253-3112 K 15 WIRE SIZE [AWG] DIM A 16-18 20-22 16-18 20-22 16-18 20-22 5.54 5.54 4.54 4.54 4.54 4.54 TIN/NICKEL TIN/NICKEL 15AU/NICKEL 15AU/NICKEL 30AU/NICKEL 30AU/NICKEL 14 13 12 11 10 9 8 7 5 6 4 3 2 1 L SEE DETAIL 3 K +0.10 3.45 -0.29 1.41 1.41 J J DETAIL 3 SCALE 2:1 DIM "A" REF H H 19.87 REF Z Z 16-18 AWG 20-22 AWG DIM "B" 2.71 2.16 DIM "C" 2.77 2.20 DIM "D" 2.63 2.08 DIM "E" 2.89 2.33 G G 0.20 REF CUT OFF VESTIGE Y Y ⌀ 1.50 F F 3.79 REF 2.97 REF NOTES: E DIM "C" DIM "E" E 8.50 REF 1. MATERIAL: HIGH CONDUCTIVITY COPPER ALLOY 2. PLATING FINISH: OPTION 1 - 1.5µm(60µin)-2.5µm(100µin) TIN OVER 17.00 REF 1.25µm(50µin)-2.5µm(100µin) NICKEL OVERALL DIM "B" DIM "D" OPTION 2 - 0.35µm(15µin) GOLD CONTACT AREA, 1.5µm(60µin)-2.5µm(100µin) TIN CRIMP AREA OVER D D 1.25µm(50µin)-2.5µm(100µin) NICKEL OVERALL OPTION 3 - 0.70µm(30µin) GOLD CONTACT AREA, 1.5µm(60µin)-2.5µm(100µin) TIN CRIMP AREA OVER 1.25µm(50µin)-2.5µm(100µin) NICKEL OVERALL 3. PRODUCT SPECIFICATION PS-172323-0001 SECTION Y-Y SECTION Z-Z 4. PACKAGING SPECIFICATION PK-172253-5101 5. TERMINAL FOR USE WITH 172256, 172258, 172260 AND 172262 RECEPTACLE HOUSING C C 6. WHEN TERMINALS ARE INSTALLED IN THE HOUSING THE WIRES ARE TO BE DRESSED IN SUCH WAY TO ALLOW THE TERMINALS TO FLOAT FREELY IN THE POCKET 7. TERMINAL DESIGNED FOR SINGLE WIRE CRIMP 8. PART CONFORMS TO CLASS "B" REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 MXN 9.APPLICATION SPECIFICATION AS-172323-0001 10.RECOMMENDED INSULATOR B 16AWG WIRE - OD 2.00MM MAX. MOLEX LOGO 20AWG WIRE - OD 1.50MM MAX. SCALE 8:1 22AWG WIRE - OD 1.30MM MAX. = 0 = 0 = 0 = A RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: B DATE: 2015/8/12 P1 RELEASE DATE 18 2016/05/24 17 17:04:49 C 16 15 14 13 12 11 10 9 8 7 6 0 4 PLACES = 0 = 0 C8 5 DATE 2014/03/07 DROSCA ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0.25 DATE JCOMERCI ± DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 2015/11/13 PPEREZ03 APPR BY 0 PLACES ULTRA-FIT RECEPTACLE TERMINAL FOR 16-18 AWG, 20-22AWG DATE CHK'D BY EC NO: DRWN: CHK'D: APPR: = 0 DRWN BY ° ANGULAR TOL ± REV 18AWG WIRE - OD 1.70MM MAX. EC DESCRIPTION 2016/05/24 2016/05/24 2015/09/29 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 1:1 = 0 (UNLESS SPECIFIED) 105236 PPEREZ RHODGE RHODGE B PRODUCT CUSTOMER DRAWING 2014/04/24 THIRD ANGLE PROJECTION D MATERIAL NUMBER SERIES 172253 SEE CHART DOCUMENT NUMBER GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER SD-172253-1000 3 A CUSTOMER 2 PSD 000 1 OF 1 1