1804160214

12 11 PART NUMBER 180416-0104 180416-0114 10 9 7 8 MATERIAL POLYAMIDE (PA66) GLASS FILLED, COLOR: NATURAL POLYESTER (PBT) GLASS FILLED,COLOR: WHITE DESCRIPTION 28MM X 28MM HOLDER ASSEMBLY 28MM X 28MM HOLDER ASSEMBLY 5 6 4 3 2 1 AGENCY APPROVAL UL496 FILE E345583 - H H G G PART MARKED WITH DATE CODE (YYWWD) MFG PLANT (CD) REVISION (X) PART NUMBER (180416-01X4) HOLDER ASSEMBLY 180416-0104, 180416-0114 F 46.25 REF. 23.5 REF. D E ISO VIEW A SCALE 1:1 4X ⌀3.25 REF. 4.30 REF ⌀25.50 REF. F YYWWD CD X 33.80 REF. 180416-01X4 E 21.7 REF. D C B A C NOTES: 1. MATERIALS: HOUSING AND CAPS: SEE CHART, TERMINAL: COPPER ALLOY. 2. FINISHES: TERMINAL: NICKEL (Ni) UNDERPLATE 1.27 µm; WIRE TRAP: SELECT TIN (Sn) 2.54µm; LED CONTACT: SELECT GOLD (Au) 0.76µm 3. PRODUCT SPECIFICATION: PS-180414-001 4. PACKAGING SPECIFICATION: PK-180419-007 5. APPLICATION SPECIFICATION: AS-180412-001 6. FOR USE WITH: 28MM X 28MM COB LED 7. WIRE GAUGE: 18, 20, AND 22 AWG: TIN-PLATED SOLID, TINNED STRANDED, OR PRE-TINNED STRANDED. STRIP LENGTH 10MM +2.0/-0.0MM. RECOMMENDED MAXIMUM DIAMETER AFTER TINNING: 1.40MM. LARGER DIAMETER WIRES ARE ACCEPTABLE IF FULLY INSERTABLE IN WIRE TRAP AND NO WITHDRAWAL WITHIN 20N FORCE. 8. IF REWORK IS REQUIRED, WIRE MUST BE REPLACED WITH SAME AWG AND TYPE. CARE MUST BE TAKEN NOT TO DAMAGE WIRE TRAP. REWORK IS ACCEPTABLE IF WIRE IS FULLY INSERTABLE IN WIRE TRAP AND NO WITHDRAWAL WITHIN 20N FORCE. 9. SEE CHART FOR AGENCY APPROVAL INFORMATION. 10. ELV AND ROHS COMPLIANT. DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2020/02/28 10 B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 8 SCALE mm 2:1 CURRENT REV DESC: OBSOLETED PART NO. GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 0.13 ± ± 0.25 ± 1 PLACE 0 PLACES ± ANGULAR TOL ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 02:41:31 9 DIMENSION UNITS 7 6 5 EC NO: 632260 DRWN: RPRABHUM CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MCOLE APPR: DMCGOWAN THIRD ANGLE PROJECTION 2020/01/30 2020/02/28 2020/02/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/05/21 2012/06/22 DRAWING SERIES C-SIZE 180416 4 COB LED HOLDER 28MM X 28MM SQUARE 3 SD-180416-104 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 D1 SHEET NUMBER 1 OF 3 1 A 12 11 10 9 8 7 5 6 4 3 2 1 H H G G 22.80 2X M3 OR 4-40 THREADED HOLE TORQUE: CERAMIC 0.2 N-M MIN TO 0.4 N-M MAX ALUMINUM 0.4 N-M MIN TO 0.8 N-M MAX 11.40 ⌀52 REF F F 22.80 E E 11.40 D ALTERNATE MOUNTING HOLES: 2X M3 OR 4-40 THREADED HOLE TORQUE: CERAMIC 0.2 N-M MIN TO 0.4 N-M MAX ALUMINUM 0.4 N-M MIN TO 0.8 N-M MAX 19.25 38.50 D RECOMMENDED MOUNTING DIMENSIONS 180416-0104, 180416-0114 C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: OBSOLETED PART NO. GENERAL TOLERANCES (UNLESS SPECIFIED) MM A 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 0.13 ± ± 0.25 ± 1 PLACE 0 PLACES ± ANGULAR TOL DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2020/02/28 10 INCH ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 02:41:31 9 8 7 6 5 EC NO: 632260 DRWN: RPRABHUM CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MCOLE APPR: DMCGOWAN THIRD ANGLE PROJECTION 2020/01/30 2020/02/28 2020/02/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/05/21 2012/06/22 DRAWING SERIES C-SIZE 180416 4 COB LED HOLDER 28MM X 28MM SQUARE 3 SD-180416-104 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 D1 SHEET NUMBER 2 OF 3 1 A 12 11 10 G 7 8 TYPE COB MFG H 9 5 6 DIM 'X' DIM 'Y' DIM 'Z' DIM 'D' CITIZEN CLL040, CLL042, CLU044, CLU046, CLU048 28.0 28.0 0.90 24.5 LEXTAR LUMILEDS PB38HO1.0 28.0 28.0 0.90 23.6 LUXEON 1211 28.0 28.0 1.00 21.0 SEOUL ZC25, ZC40, ZC60 28.0 28.0 0.90 24.2 LG INNOTEK 40W/60W COB 28.0 28.0 0.82 24.5 VOSSLOH-SCHWABE DMC12CC**D, DMC17CC**D 28.0 28.0 1.00 24.0 BRIDGELUX V22 28.0 28.0 1.00 23.6 4 3 2 1 H G F F DIM 'D' E E DIM 'Y' D D DIM 'X' DIM 'Z' C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: OBSOLETED PART NO. GENERAL TOLERANCES (UNLESS SPECIFIED) MM A 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 0.13 ± ± 0.25 ± 1 PLACE 0 PLACES ± ANGULAR TOL DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2020/02/28 10 INCH ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 02:41:31 9 8 7 6 5 EC NO: 632260 DRWN: RPRABHUM CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: MCOLE APPR: DMCGOWAN THIRD ANGLE PROJECTION 2020/01/30 2020/02/28 2020/02/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012/05/21 2012/06/22 DRAWING SERIES C-SIZE 180416 4 COB LED HOLDER 28MM X 28MM SQUARE 3 SD-180416-104 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 D1 SHEET NUMBER 3 OF 3 1 A