1808100001

Simplify light-fixture installations and achieve industryleading thermal, electric and optic performance with reliable, solderless LED Array Holders Chip-On-Board (COB) LED Array Holders simplify the LED installation process by eliminating the need for labor-intensive hand soldering. Risk of LED CoB damage is minimized by the reduction in handling. The holders allow customers to install LED arrays quickly into fixtures, enable field replacements and facilitate upgrades to existing applications. COB LED array holders facilitate overall light-system cost reductions with a simple installation process and superior performance. Molex provides reliable, easy-to-install holders for CREE XLamp arrays. LED Array Holders for CREE* XLamp† Arrays New Series 180810 C  XA2520, CXA2530 and CXA2540 Arrays, Round Version with Bayonet Attachment 180720 C  XA2520, CXA2530 and CXA2540 Arrays, Rectangular Version 180560 C  XA1507 and CXA1512 Arrays Features and Benefits Inspired by Zhaga Book 3 standards (round version only) Promotes standardization with existing LED eco-system; allows manufacturers to upgrade without re-designing their products LED CoB pre-hold feature Minimizes installation time by allowing LED array to be secured to the holder prior to final assembly Three-latch bayonet-style reflector attachment (180810 Series Only) Provides secure attachment to existing Fortimo™ type reflectors; easy alignment and locking features Flat surface with integrated bevel surrounding the Light Emitting Source (LES) Allows for easy connection of secondary optics without interrupting light output. Offers a clean and finished appearance Single-ended wire-trap terminal (180810 Series); Double-ended wire-trap terminal (180720, 180560 Series) Provides design flexibility by allowing single- or serially-wired LED configurations Robust housing and compression contacts Provides stable mechanical, electrical and thermal connections in LED systems. Reduces installation time and quality concerns Screw-mount attachment method for securing array to heat sink Simple attachment reduces fixture manufacturing time 4.10mm low-profile design Compact height fits many applications Releasable wire trap for rework or replacement Allows for field serviceability and upgrade Highly-reflective white thermoplastic housing Promotes light output; provides mechanical stability in hightemperature environments LED Array Holder for CREE* XLamp† CXA2520, CXA2530 and CXA2540 (Series 180810) Round Version LED Array Holder for CREE* XLamp† CXA2520, CXA2530 and CXA2540 (Series 180720) Rectangular Version LED Array Holder for CREE* XLamp† CXA1507 and CXA1512 (Series 180560) Rectangular Version * † CREE and XLamp are registered trademarks of Cree, Inc. Specifications Reference Information Packaging: Tray UL File No.: E345583 CSA File No.: E345583 Designed In: Millimeters RoHS: Yes REACH SVHC: Contains SVHC: No Electrical Voltage (max.): 600V DC Current : 2.5A continuous; 3.5A max. Contact Resistance: 20 milliohms max. Dielectric Withstanding Voltage: 300V DC Insulation Resistance: 5000 Megohms min. Mechanical Wire Insertion Force: 5N max. Wire Pull Out Force: 30N max. Durability (min.): 5 Cycles Physical Housing: CXA15/CXA25 – White PBT 30% Glass fill UL94V-0 Contact: Copper Alloy(Cu), Nickel (Ni) and Gold (Au) Plating: Contact Area — Gold (Au) Underplating — Nickel (Ni) Additional Product Features Flat Surface Double Ended Wire Trap Release (anode) LED Array Holders for CREE* XLamp† Arrays Single Ended Wire Trap Release Double Ended Wire Trap Release (cathode) Integrated Pre-Hold Tab secures array prior to mounting assembly to heat sink LED Array Holders for CREE* XLamp† Arrays Applications All general illumination applications – Downlighting – Track – Pendants – Linear Areal Lighting – Roadways – Parking Lots – Wall Packs Ordering Information Order No. Array 180560-0001 CXA1507and CXA1512 Rectangular 180720-0001 180720-0002 Version CXA2520, CXA2530 and CXA2540 180810-0001 Round ‡Integrated Pre-Hold Tab Installation Clear Cover Wire Attach Method (2) M2.5 Screw Mounting No Poke-In Releasable Wire Trap No Yes ‡Note: Integrated pre-hold tab can be available for any version; contact Molex for additional information * † CREE and XLamp are registered trademarks of Cree, Inc. www.molex.com/link/holdercree.html www.molex.com/industry/solidstatelighting.html Order No. 987650-8981 Rev 1 Printed in USA/KC/2013.11 ©2013 Molex