1837043262

TPP7XGJERxG 1550nm 40km SFP+ Transceivers Features  Multi-rate for Ethernet & Fiber Channel  Transmission distance up to 40km (SM fiber)  Low power consumption  Wide case operating temperature range  Compliant with SFP+ Electrical MSA SFF-8431  Compliant with SFP+ Mechanical MSA SFF-8432  Compliant with 10GBASE-E specifications  Digital Diagnostics Monitoring (DDM) through Serial Interface comply with SFF-8472, Rev. 11.3  RoHS 6/6 compliant  Laser Class 1 IEC/CDRH compliant Description The TPP7XGJERxG is an enhanced small form factor pluggable (SFP+) fiber optic transceiver with digital diagnostics monitoring functionality (DDM). Supporting Ethernet and Fiber Channel standards makes it ideally suited for 10Gbps data-com and storage area network applications. DDM functionality (alarm and warning features) is integrated into the design via an I2C serial interface per the Multi-Source Agreement (MSA) SFF8472, Rev. 11.3. The TPP7XGJERxG transceiver connects to standard 20-pad SFP+ connectors for hot plug capability. This allows the system designer to make configuration changes or maintenance by simply plugging in different transceivers without removing the power supply from the host system. The transmitter and receiver DATA interfaces are internally AC-coupled. LV-TTL Transmitter Disable control input and Loss of Signal (LOS) output interfaces are also provided. The transceiver supports data rates ranging from 11.3Gbps down to 8Gbps. It provides an excellent solution for data transmission at 1550nm over up to 40km single mode fiber. The low power consumption and excellent EMI performance enable system design with high port density. The product is RoHS compliant and is designed and tested in accordance with industry safety standards. The transceiver is Class 1 Laser product per U.S. FDA/CDRH and international IEC-60825 standards. The transceiver has bail-type latch, which offers an easy and convenient way to release the modules. The latch is compliant with the SFP MSA. The transceiver operates from a single +3.3V power supply over an operating case temperature range of -5°C to +70°C (commercial), or -5°C to +85°C (extended) or 40°C to +85°C (industrial) . The housing is made of metal for EMI immunity. Absolute Maximum Ratings Parameter Storage Temperature Range Commercial Case Operating Extended Temperature 1 Industrial Operating Relative Humidity 2 Supply Voltage Range 1 2 Symbol Min Max Units TST - 40 + 85 °C -5 -5 - 40 0 - 0.5 + 70 + 85 + 85 85 + 3.6 TOP RH VCC °C % V Measured on top side of SFP+ module at the front center vent hole of the cage Non condensing 46335 Landing Pkwy‧Fremont CA 94538-6407‧Tel: 510-933-7200‧Fax: 510-933-7300‧Email: info@oplink.com‧Web: www.oplink.com Page 1 of 6 S0510. Rev.01. 2015-06-25 TPP7XGJERxG 1550nm 40km SFP+ Transceivers Transmitter Performance Characteristics (Over Operating Case Temperature, VCC =3.13 to 3.47V) Parameter Data Rate Center Wavelength Average Optical Output Power 1 Optical Modulation Amplitude Extinction Ratio Relative Intensity Noise Side Mode Suppression Ratio Optical Return Loss Tolerance Transmitter and Dispersion Penalty @ 10.3125Gb/s Optical Output Eye 1 Symbol B Pavg POMA ER RIN SMSR - Min 1530 - 4.7 - 1.7 3 30 - Typ 10.3125 - Max 1565 +4 - 128 - 21 Units Gb/s nm dBm dBm dB dB/Hz dB dB TDP - - 3 dB C Compliant with IEEE 802.3ae Average power figures are informative only, per IEEE 802.3ae. Note: The specified characteristics are met within the recommended range of operation. Unless otherwise noted typical data are quoted at nominal voltage and +25°C ambient temperature. Receiver Performance Characteristics (Over Operating Case Temperature, VCC =3.13 to 3.47V) Parameter Data Rate Wavelength of Operation Receiver Sensitivity OMA @ 10.3125Gb/s1 Stressed Receiver Sensitivity in OMA (@ 10.3125Gb/s) 2 Maximum Input Power (10-12 BER) Receiver Reflectance LOS Hysteresis LOS Thresholds 1 2 Symbol B Pmin Min 1530 - Typ 10.3125 - Max 1565 - 14.1 Units Gb/s nm dBm - - - - 11.3 dBm PMAX - -1 0.5 - - 26 - dBm dB dB Increasing Light Input Plos+ - - - 16 Decreasing Light Input Plos- - 30 - -  dBm Specified with BER 1000V) Exceeds requirements Discharges ranging from 2kV to 15kV without damages to the transceiver Exceeds requirements Class B 46335 Landing Pkwy‧Fremont CA 94538-6407‧Tel: 510-933-7200‧Fax: 510-933-7300‧Email: info@oplink.com‧Web: www.oplink.com Page 5 of 6 S0510. Rev.01. 2015-06-25 TPP7XGJERxG 1550nm 40km SFP+ Transceivers Module Outline Ordering Information Model Name Operating Temperature Nominal Wavelength Distance Latch Color TPP7XGJERC000E2G TPP7XGJERE000E2G TPP7XGJERI000E2G - 5C to + 70C - 5C to + 85C - 40C to + 85C 1550nm 1550nm 1550nm 40km 40km 40km Red Red Red Oplink Communications, LLC. reserves the right to make changes in equipment design or specifications without notice. Information supplied by Oplink Communications, LLC. is believed to be accurate and reliable. However, no responsibility is assumed by Oplink Communications, LLC. for its use nor for any infringements of third parties, which may result from its use. No license is granted by implication or otherwise under any patent right of Oplink Communications, LLC. ©2015 Oplink Communications, LLC. 46335 Landing Pkwy‧Fremont CA 94538-6407‧Tel: 510-933-7200‧Fax: 510-933-7300‧Email: info@oplink.com‧Web: www.oplink.com Page 6 of 6 S0510. Rev.01. 2015-06-25