19160-0014

Splices NYLON-INSULATED, CLOSED-END CONNECTORS Molex Nylon Closed-End Connectors feature 2-piece construction. A translucent nylon-molded insulation is adhered to the metal connector insert. The connector’s insert is annealed, Tin-plated, seamless, pure electrolytic, tough pitch Copper. Individual design and performance requirements dictate the use of Copper inserts. These connectors are all rated for a maximum of 600V. Nylon-Insulated, Closed-End Connectors Wire Range AWG (mm 2) 14-22 (2.00-0.35) 12-22 (3.30-0.35) 10-16 (5.00-1.30) 8 (8.50) Loose Piece Order No. 19160-0012 19160-0009 19160-0002 19160-0024 Mylar Tape Outside Order No. Diameter OD 19160-0070 7.80 (.310) 19160-0071 8.90 (.350) 19160-0083 11.20 (.440) 19160-0028 14.20 (.560) Overall Barrel Length L Length B 19.81 (.780) 10.92 (.430) 21.84 (.860) 9.40 (.370) 22.86 (.900) 11.68 (.460) 27.70 (1.090) 10.90 (.430) Inside Circular Diameter ID Mil Area 6.60 (.260) 600-5180 7.10 (.280) 600-8230 9.60 (.380) 2200-13,100 12.70 (.500) 13,100-20,800 L ID OD B MATERIAL: COPPER CONNECTOR INSERTS Molex Connector Inserts are the same annealed, Tin-plated, seamless pieces used in the nylon-insulated, closed-end connectors above. These inserts are used in applications where insulation is not essential. Connector Inserts Wire Range AWG (mm 2) 14-22 (2.00-0.35) 12-22 (3.30-0.35) 10-16 (5.00-1.30) 8 (8.50) L ID OD MATERIAL: COPPER Order No. 19160-0025 19160-0022 19160-0014 19160-0029 Outside Diameter OD 3.61 (.142) 4.22 (.166) 5.56 (.219) 7.67 (.302) Overall Length L 7.92 (.314) 8.05 (.317) 7.47 (.294) 11.05 (.435) Inside Diameter ID 2.29 (.090) 2.64 (.104) 3.84 (.151) 5.59 (.220) Circular Mil Area 600-5180 600-8230 2200-13,100 13,100-20,800 TWIST LOCK WIRE CONNECTORS A cone shaped, plated Steel spring conforms to the inside contour of the insulating shell, which supports the spring as the conductor is driven up into the cone. Requiring no pretwisting, the wires are automatically twisted together for a secure connection and maximum contact. Fixed spring wire connectors may be used to make branch circuit or fixture wire connections on numerous combinations of solid and/or stranded wire. Twist Lock Wire Connectors Order No. 19160-0039 19160-0040 19160-0041 19160-0042 19160-0043 Copper Wire Only Wire Range AWG Minimum Maximum A 16-22 (1.30-0.35) 1 #22 w 1 #20 2 #16 37/64 16-22 (1.30-0.35) 3 #22 3 #16 45/64 14-22 (2.00-0.35) 3 #20 4 #16 w/ 1#20 27/32 10-18 (5.00-0.80) 1 #14 w/ 1 #18 4 #14 15/16 10-18 (5.00-0.80) 2 #14 2 #10 w/ 2 #12 1-1/16 B 11/64 11/64 21/64 17/64 17/64 Dimension C D 1/8 1/4 3/16 5/16 13/64 11/32 15/64 7/16 21/64 17/32 E 21/64 25/64 7/16 35/64 21/32 WING LOCK WIRE CONNECTORS A square wire, coiled spring expands freely within the tough plastic shell and can accommodate a wide range of wire combinations. The angled edges of the spring attach to the conductor as the connector is twisted on for an easily secured joint. The spring applies even pressure over the entire contact area and provides a low resistance connection and mechanical strength against pull and vibration. Wing Lock Wire Connectors Order No. 19160-0044 19160-0045 19160-0046 19160-0047 Copper Wire Only Wire Range AWG Min. Max. A 10-22 (5.00-0.35) 2 #18 3 #12 1-1/32 10-18 (5.00-0.80) 2 #14 5 #12 1-1/4 6-22 (13.50-0.35) 3 #22 4 #12 w/ 2 #18 47/64 6-14 (13.50-2.00) 1 #10 w/1 #12 1 #6 w/2 # 8STR 1-1/2 Molex connectors must withstand extreme dielectric voltage tests to determine performance. All connectors are UL listed and CSA certified as Pressure-Type wire connectors for 600V max., building wire; 1000V max., signs or fixtures and comply with Federal Specification W-S-610d. Temperature rating 105˚C (221˚F) max. Order #19160-0046 only. 48 B 5/16 5/16 9/16 7/16 Dimension C D 7/32 1/4 9/32 7/16 5/16 21/64 3/8 3/4 E 23/32 29/32 1-5/32 1-1/4 F N/A N/A 5/16 N/A