2005052011

20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M L L �23.40� BAY LOCATION 2 BAY LOCATION 1 PIN 1 UPPER LEFT EACH BAY ALL CONFIGURATIONS K 2 HOUSING CAVITY ID 2.60 ±0.70 TYP. A1 A2 K �⌀ 2.50� DETAIL B B 17 25.50 ±0.30 DETAIL C J J �⌀ 2.50� �4.0� TYP. C H H 1 �4.1� TYP. 3 3.7 TYP. (DIM A) �49.10� 2-BAY SHOWN �2.0� TYP. A4 A3 �24.10� SEE INTERFACE DRAWING(SEE CHART) FOR POCKET DETAILS SEE NOTE 3.7 G G NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: 1.1 APPLICATION SPECIFICATION 2005060000-AS 1.2 PRODUCT SPECIFICATION 2005060001-PS CLASSIFICATIONS T1V1S1 TO GMW 3191 2012 1.3 PACKAGING SPECIFICATION PER MOLEX DRAWING 2. DESIGN - MATERIALS: 2.1 HOUSING: SPS 30% GF 2.2 BLADE TERMINALS: A. 0.5MM BLADES BASE MATERIAL: COPPER ALLOY CONDUCTIVITY > 28% IACS @ 20°C UNDERPLATE: OVERALL NICKEL OVERPLATE: OVERALL TIN B. 1.2MM BLADES BASE MATERIAL: COPPER ALLOY CONDUCTIVITY > 28% IACS @ 20°C UNDERPLATE: OVERALL NICKEL OVERPLATE: OVERALL TIN C. 2.8MM BLADES BASE MATERIAL: COPPER ALLOY CONDUCTIVITY > 40% IACS @ 20°C UNDERPLATE: OVERALL NICKEL OVERPLATE: OVERALL TIN 2.3 FASTENER: STAINLESS STEEL 3. DESIGN - GEOMETRY: 3.1 ALL GRAPHIC DATA IS BASIC (NO TOLERANCE) AND MUST BE TAKEN FROM THE DATA FILE AT ITS LATEST REVISION 3.2 PRODUCT DESIGN MODEL NUMBER: SEE CHART. MODEL NUMBERS SAME AS PART NUMBERS. 3.3 GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5-2009 3.4 EDGES OF UNDEFINED SHAPE PER ISO 13715 3.5 CORNERS SHOWN AS SHARP TO BE R 0.4 MAX 3.6 LETTERING SHALL BE MAX POSSIBLE FOR READABILITY. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. 3.7 FOR BAY/POCKET DEFINITION SEE MOLEX INTERFACE DRAWINGS IN CHART. FUNCTIONAL APPLIES TO ALL FUNCTIONALS IN INTERFACE DRAWINGS. F E D C F E MARKING THIS HALF OF THIS SURFACE, BAY 1 (SEE NOTE 4.3) A FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/11/11 17 INSPECTION BALLOON NUMBER LOG PER DRAWING REVISION: C10 LAST BALLOON NUMBER: 17 ADDED BALLOON NUMBER: NONE DELETED BALLOON NUMBER: NONE 18:55:27 16 15 SEE SHEET 2 DESCRIPTION REVISION DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) QUALITY CHECKS. 4. DESIGN - MANUFACTURING: 4.1 VISUAL DEFECTS SHALL MEET MOLEX COSMETIC STANDARD PS-45499-002 (CLASS B) 4.2 REFLOW SOLDERABILITY PER SMES-152 4.3 LASER ETCHED PART MARKING (1.5mm HEIGHT) CODED AS FOLLOWS ROW 1: "YYDDDHHMMSS" - DATE AND TIME CODE ROW 2: "XXXXX" OR "XXXXX_X" -" XXXXX" IS LAST 5 DIGITS OF PART NO AND DENOTES ORIGINAL ASSEMBLY LINE -"_X" DENOTES CAPACITY ASSEMBLY LINE SUCH AS "_B" OR MORE IN FUTURE DOCUMENT STATUS D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C 3.8 G DENOTES DIMENSIONS TO BE QUALIFIED WITH GAGE FOR PPAP AND IN PROCESS B DIM A 49.1 72.5 95.9 119.3 142.7 166.1 BAY QTY 2 3 4 5 6 7 14 13 12 11 10 9 ANGULAR TOL ± ° 4 PLACES ± 0.0 3 PLACES ± 0.0 2 PLACES ± 0.13 1 PLACE ± 0.25 0 PLACES ± 0.0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 8 7 STAK50H MODULAR HEADER VERT MULTIPLE BAY EC NO: 684964 DRWN: RGV CHK'D: JCONDON APPR: JCONDON INITIAL REVISION: DRWN: JRUTTER APPR: KDEKOSKI THIRD ANGLE PROJECTION 2021/11/11 2021/11/11 2021/11/11 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/05/04 2016/06/17 DRAWING 5 2005050000 MATERIAL NUMBER SERIES D-SIZE 200505 6 B PSD 000 SHEET NUMBER CUSTOMER SEE CHART 4 C11 1 OF 4 3 2 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M L L SINGLE BAY ASSEMBLY PART NUMBER PER LOCATION ASSEMBLY PART NO. 4 5 1 2 3 2005052003 2005010281 2005010251 -------NA------- -------NA------- -------NA------2005053001 2005010271 2005010272 2005010321 -------NA------- -------NA------2005054001 2005010251 2005010281 2005010321 2005010282 -------NA------2005053002 2005010271 2005010273 2005010322 -------NA------- -------NA------2005053003 2005010252 2005010271 2005010322 -------NA------- -------NA------2005052004 2005010322 2005010122 -------NA------- -------NA------- -------NA------2005053004 2005010122 2005010322 2005010324 -------NA------- -------NA------2005052007 2005010322 2005010324 -------NA------- -------NA------- -------NA------2005053009 2005010121 2005010281 2005010251 -------NA------- -------NA------2005056001 2005010281 2005010322 2005010253 2005010122 2005010324 2005053010 2005010321 2005010323 2005010324 -------NA------- -------NA------2005053011 2005010323 2005010324 2005010252 -------NA------- -------NA------2005054002 2005010321 2005010281 2005010251 2005010322 -------NA------2005052005 2005010322 2005010122 -------NA------- -------NA------- -------NA------2005052009 2005010251 2005010252 -------NA------- -------NA------- -------NA------2005055004 2005010321 2005010322 2005010323 2005010324 2005010251 2005052011 2005010252 2005010323 -------NA------- -------NA------- -------NA------2005052012 2005010122 2005010322 -------NA------- -------NA------- -------NA------2005053012 2005010324 2005010322 2005010122 -------NA------- -------NA------2005052013 2005010251 2005010271 -------NA------- -------NA------- -------NA------- K J H 6 -------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA------2005010273 -------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA------- 7 -------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA-------------NA------- PACKAGING DRAWING SINGLE BAY ASSEMBLY TUBE TUBE TUBE TUBE TUBE TUBE TUBE TUBE TUBE TUBE TUBE TUBE TUBE TRAY TUBE TUBE TUBE TUBE TUBE TUBE 2005010121 THROUGH 2005010124 2005010251 THROUGH 2005010254 2005010271 THROUGH 2005010274 2005010281 THROUGH 2005010284 2005010321 THROUGH 2005010324 2005011120SD 2005011250SD 2005011270SD 2005011280SD 2005011320SD INTERFACE DRAWING TERMINAL QUANTITIES 0.5mm 1.2mm 2.8mm 4 4 8 SD-160026-002 SD-160027-002 SD-160029-002 SD-160014-002 SD-160028-002 21 19 21 28 K 8 7 4 C11 ADDED PN 2005052013 11-NOV-2021, ECN: 684964 C10 NOTE 4.3 UPDATED C9 CHANGE SINGLE BAY PN FROM 2005010322, 2005010322 TO 2005010122, 2005010322 FOR MULTI-BAY PN 2005052012 C8 ADDED PN 2005053012 21-APRIL-2021, ECN: 661591 J H G F E D C7 ADDED PN 2005052012 24-JULY-2020 MKP ECN:642177 C6 ADDED PCB HOLE DIMENSIONAL & POSITIONAL TOLERANCE 11-JUNE-2020 YPENG47 ECN:639277 C5 ADDED BALLOON #17 AND TOLERANCE ADDED PN 2005052011 ECN 638696 C4 ADDED PART NUMBER 2005055004 ECN 615503 C3 ADDED PART NUMBER 2005052009 ECN 610976 C2 ADDED PACKAGING COLUMN TO CHART C1 ADDED NOTE 2.3. ADDED PART NUMBERS. ECN 602740. C INTERFACE GEOMETRY CHANGE TO LOCK TAB. SAP ECN 10906786. B4 SWITCHED BAYS IN 2005052004 1MAY2018 ECN 10895975 B3 ADDED PART NUMBERS B2 ADDED PART NUMBERS B1 ADDED PART NUMBERS B PCB POST CHANGE, MODULE OPENING CHANGE, NOTES UPDATE A2 ADDED PART NUMBERS, CHANGED MARKING. GDT ON MODULE OPENING. A1 CHANGED 2005053003 25K2 A RELEASE 1 INITIAL RELEASE G F E D REVISION DESCRIPTION C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/11/11 17 ± ° 4 PLACES ± 0.0 3 PLACES ± 0.0 2 PLACES ± 0.13 1 PLACE ± 0.25 0 PLACES ± 0.0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 18:55:27 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 STAK50H MODULAR HEADER VERT MULTIPLE BAY EC NO: 684964 DRWN: RGV CHK'D: JCONDON APPR: JCONDON INITIAL REVISION: DRWN: JRUTTER APPR: KDEKOSKI THIRD ANGLE PROJECTION 2021/11/11 2021/11/11 2021/11/11 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/05/04 2016/06/17 DRAWING 5 2005050000 MATERIAL NUMBER SERIES D-SIZE 200505 6 B PSD 000 SHEET NUMBER CUSTOMER SEE CHART 4 C11 2 OF 4 3 2 1 A 20 19 18 17 16 15 14 M 13 12 11 10 9 7 8 5 6 4 3 2 1 M RECOMMENDED PCB LAYOUT PER BAY FOR REFERENCE ONLY 9.20 L 4X 4.00 2X 5.20 2.00 TYP. 8X ⌀ 1.30 ±0.05 PIN 1 ⌖ 0.10 E 2.50 ⌖ 0.10 E PIN 1 ⌖ 0.10 E ⌖ 0.10 E 5.85 7X ⌀ 1.30 ±0.05 8X ⌀ 1.30 ±0.05 PIN 1 21X ⌀ 1.10 ±0.05 PIN 1 L 4X 4.00 6X 4.00 5.85 5.85 2.50 K 8X ⌀ 1.50 ±0.05 3.85 K 8X ⌀ 1.50 ±0.05 3.87 ⌖ 0.10 E ⌖ 0.10 E 5.00 2.50 2.98 5.00 2.50 2.50 J 2.00 2.00 2X 3.20 2X 4.00 ⌖ 0.10 E ⌖ 0.10 E 2X 3.20 12 WAY 2005010121 2005010122 2005010123 2005010124 H 21X ⌀ 1.10 ±0.05 19X ⌀ 1.10 ±0.05 2X 4.00 2X 4.00 J 2.00 TYP. 2.00 TYP. 2X 4.00 2.50 2.98 25 WAY 2005010251 2005010252 2005010253 2005010254 27 WAY 2005010271 2005010272 2005010273 2005010274 28 WAY 2005010281 2005010282 2005010283 2005010284 H G G 2X 4.00 RECOMMENDED PCB LAYOUT FOR MULTIBLE BAY HEADER FOR REFERENCE ONLY INSERT NECESSARY BAYS USING CHART ON SHEET 1 F ⌀ 3.75 ±0.05 TYP. ⌖ 0.10 E E 4X ⌀ 1.30 ±0.05 PIN 1 ⌖ 0.10 E 5.83 FOR HOLE LOCATIONS SEE RECOMMENDED PCB LAYOUT PER BAY 23.40 TYP. 5.20 F 2.50 3.00 2.50 DIM X E E 2.00 TYP. 28X ⌀ 1.10 ±0.05 4X 9.20 D DIM Y PIN 1 LOCATION CHART BAY DIM X DIM Y 12 WAY 4.0 3.8 25 WAY 4.0 4.63 27 WAY 4.6 3.8 28 WAY 4.6 3.8 32 WAY 4.0 3.8 PIN 1 PIN 1 21.50 TYP. C ⌖ 0.10 E D 32 WAY 2005010321 2005010322 2005010323 2005010324 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 5:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) BAY B BAY A B 21.20 A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/11/11 17 23.40 TYP. ± ° 4 PLACES ± 0.0 3 PLACES ± 0.0 2 PLACES ± 0.13 1 PLACE ± 0.25 0 PLACES ± 0.0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 18:55:27 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 STAK50H MODULAR HEADER VERT MULTIPLE BAY EC NO: 684964 DRWN: RGV CHK'D: JCONDON APPR: JCONDON INITIAL REVISION: DRWN: JRUTTER APPR: KDEKOSKI THIRD ANGLE PROJECTION 2021/11/11 2021/11/11 2021/11/11 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/05/04 2016/06/17 DRAWING 5 2005050000 MATERIAL NUMBER SERIES D-SIZE 200505 6 B PSD 000 SHEET NUMBER CUSTOMER SEE CHART 4 C11 3 OF 4 3 2 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M 0.5 MM BLADE PCB TERMINATION 4 0.40 ±0.03 ⌖ 0.70Ⓜ A B C L G 0.40 ±0.05 6 ⌖ 0.70Ⓜ A B C 5 1.2 MM BLADE PCB TERMINATION 7 G G 15 8 0.80 ±0.05 ⌖ 0.70Ⓜ A B C K G 11 L 14 9 0.60 ±0.05 ⌖ 0.70Ⓜ A B C G 2.8 MM BLADE PCB TERMINATION 10 0.80 ±0.05 ⌖ 0.70Ⓜ A B C 0.60 ±0.03 12 ⌖ 0.70Ⓜ A B C 13 G K DETAIL C SCALE 5:1 DETAIL B SCALE 5:1 TYPICAL PCB TERMINATIONS SIZE AND TRUE POSITION TOLERANCES SEE INDIVIDUAL SINGLE BAY DRAWINGS FOR LOCATIONS (CHART ON SHEET 1) PARTS TO BE INSPECTED WITH FUNCTIONAL GAGE SEE NOTE 3.8 J J H H RECOMMENDED MODULE OPENING TO PASS ISO 20653 IP-4 FOR INDIVIDUAL CONNECTOR IP RATINGS SEE PRODUCT SPECIFICATION IN NOTE 1.2 �4.90� SPACE FOR MODULE COVER G G 1.80 2.50 7.06 F F 17.56 2X 115° 26.50 E E 17.18 6.68 D D 1.80 2.50 DIM B ⌢ 0.10 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C QTY BAYS 2 3 4 5 6 7 B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/11/11 17 DIM B 50.1 73.5 96.9 120.3 143.7 167.1 FOR PACKAGE SPACE FOR CONNECTOR UNMATED AND MATED WITH COVER SEE INTERFACE DRAWINGS (CHART ON SHEET 1) SCALE mm 5:1 ANGULAR TOL ± ° 4 PLACES ± 0.0 3 PLACES ± 0.0 2 PLACES ± 0.13 1 PLACE ± 0.25 0 PLACES ± 0.0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15 14 13 12 11 10 9 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) 18:55:27 16 DIMENSION UNITS 8 7 STAK50H MODULAR HEADER VERT MULTIPLE BAY EC NO: 684964 DRWN: RGV CHK'D: JCONDON APPR: JCONDON INITIAL REVISION: DRWN: JRUTTER APPR: KDEKOSKI THIRD ANGLE PROJECTION 2021/11/11 2021/11/11 2021/11/11 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/05/04 2016/06/17 DRAWING 5 2005050000 MATERIAL NUMBER SERIES D-SIZE 200505 6 B PSD 000 SHEET NUMBER CUSTOMER SEE CHART 4 C11 4 OF 4 3 2 1 A