200528-0051

9 7 8 5 6 4 3 2 1 NOTES 引き出し方向 E 1. 梱包数量： 3000個／リール NUMBER OF CONNECTORS : 3000 PCS/REEL. PULL DIRECTION ⌀380 ±2 (80) 2. リードテープ長さ LEAD TAPE LENGTH 100MIN. 空ポケット部 EMPTY PART 引き出し方向 PULL DIRECTION トップテープリーダー部 部品挿入部 TOP TAPE LEADER PART D 端末部(空部) TAIL PART (EMPTY) COMPONENT SUPPLIER 400MIN. D 160MIN. 3. カバーテープの剥離強度については、IEC60286-3に準拠。 COVER TAPE PEEL FORCE IS DEFINED BY IEC 60286-3. U D ±1 4. 製品詳細寸法については、図面 2005281001-SD を参照下さい。 DIMENTIONS OF PRODUCT, REFER TO 2005281001-SD. E ±1 C 0°) (12 (2) C 5. 材料　MATERIAL キャリアテープ : ポリスチレン トップテープ : ポリエチレンテレフタレート、ポリエチレン リール : ポリスチレン＜リサイクル材を含む＞ CARRIER TAPE : POLYSTYRENE TOP TAPE : POLYETHYLENE TEREHTHALATE, POLYETHYLENE REEL : POLYSTYRENE＜RECYCLE MATERIAL CONTAINED＞ (⌀ 10) (22) E B B (⌀ 21) (⌀ 13) DETAIL U THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/10/11 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:27:53 7 6 5 4 CURRENT REV DESC: EC NO: 605694 DRWN: JASANUMA CHK'D: TRSUZUKI APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2018/10/10 2018/10/11 2018/10/11 2018/10/05 2018/10/10 A3-SIZE 200528 3 PRODUCT CUSTOMER DRAWING 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005280001-SD MATERIAL NUMBER SERIES A 1.0 FPC ZIF 2 CONT EMBT PKG PSD 000 B SHEET NUMBER CUSTOMER SEE CHART 1 OF 3 1 9 7 8 5 6 4 3 2 1 引き出し方向 PULL DIRECTION (C) (H) D (1.75) 0.5 ±0.05 (2.8) CONNECTOR SERIES No. 2005281**1 (1.875) V F ±0.3 (B) (C) D W .1 +0 0 ⌀ 5 1. SECTION V-V C (1.075) (A) (3.025) トップテープ TOP TAPE E (4.1) (B) E W (1) (5.8) V 4 ±0.1 (2) 12 ±0.1 累積ピッチ 40 ±0.2 ACCUMULATIVE PITCH 40 ±0.2 C (5.8) (1) (2.8) (4.1) B SECTION W-W SCALE 4:1 11.5 ---- 24 H G F 10.4 9.4 8.4 29.4 25.4 7.4 6.4 5.4 14.4 13.4 12.4 11.4 10.4 9.4 15.5 14.5 13.5 12.5 11.5 10.5 D B A E C 2005280091 2005280081 2005280071 2005280061 2005280051 2005280041 EMBOSSED PACKAGE オーダー番号 ORDER No. 9 8 7 6 5 4 B Ckt THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2018/10/11 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:27:53 7 6 5 4 CURRENT REV DESC: EC NO: 605694 DRWN: JASANUMA CHK'D: TRSUZUKI APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2018/10/10 2018/10/11 2018/10/11 2018/10/05 2018/10/10 A3-SIZE 200528 3 PRODUCT CUSTOMER DRAWING 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005280001-SD MATERIAL NUMBER SERIES A 1.0 FPC ZIF 2 CONT EMBT PKG PSD 000 B SHEET NUMBER CUSTOMER SEE CHART 2 OF 3 1 9 7 8 5 6 4 3 2 1 引き出し方向 PULL DIRECTION E 0.2 ±0.05 1.5 +0.1 0 トップテープ TOP TAPE (4.1) (3.025) E (1.075) CONNECTOR SERIES No. 2005281**1 (1.875) X (H) Y (A) (B) (C) G ±0.1 (B) F ±0.3 D (C) D Y 26.2 52.4 56 20.2 40.4 44 14.2 28.4 32 C (1.75) .1 +0 0 0.5 ±0.05 ⌀ (2.8) 1.5 X (5.8) (1) 4 ±0.1 SECTION X-X (2) 累積ピッチ 40 ±0.2 ACCUMULATIVE PITCH 40 ±0.2 12 ±0.1 B (5.8) (1) (2.8) (4.1) H F G 31.4 30.4 29.4 61.4 57.4 28.4 27.4 26.4 25.4 24.4 23.4 22.4 21.4 49.4 45.4 20.4 19.4 18.4 17.4 16.4 15.4 14.4 37.4 33.4 13.4 12.4 11.4 35.4 34.4 33.4 32.4 31.4 30.4 29.4 28.4 27.4 26.4 25.4 24.4 23.4 22.4 21.4 20.4 19.4 18.4 17.4 16.4 15.4 36.5 35.5 34.5 33.5 32.5 31.5 30.5 29.5 28.5 27.5 26.5 25.5 24.5 23.5 22.5 21.5 20.5 19.5 18.5 17.5 16.5 D B A E C 2005280301 2005280291 2005280281 2005280271 2005280261 2005280251 2005280241 2005280231 2005280221 2005280211 2005280201 2005280191 2005280181 2005280171 2005280161 2005280151 2005280141 2005280131 2005280121 2005280111 2005280101 EMBOSSED PACKAGE オーダー番号 ORDER No. 30 29 28 27 26 25 24 C 23 22 21 20 19 18 17 16 15 B 14 13 12 11 10 Ckt THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SECTION Y-Y SCALE 4:1 DOCUMENT STATUS 9 P1 RELEASE DATE 2018/10/11 8 SCALE mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 DIMENSION UNITS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:27:53 7 6 5 4 CURRENT REV DESC: EC NO: 605694 DRWN: JASANUMA CHK'D: TRSUZUKI APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2018/10/10 2018/10/11 2018/10/11 2018/10/05 2018/10/10 A3-SIZE 200528 3 PRODUCT CUSTOMER DRAWING 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005280001-SD MATERIAL NUMBER SERIES A 1.0 FPC ZIF 2 CONT EMBT PKG PSD 000 B SHEET NUMBER CUSTOMER SEE CHART 3 OF 3 1 9 7 8 A ±0.2 X 5 6 4 (0.4) 3 (4) 0.4 ±0.1 ⌖ 0.2 X INSERTION DEPTH POINT (1.45) 1 0.5 (0.15) 1 FPC挿入深さ (B) E 2 接点位置 LENGTH TO CONTACT POINT (1.05) E 接点位置 LENGTH TO CONTACT POINT HOUSING 1.42 3.95 (5.25) ハウジング アクチュエータ ターミナル SECTION B-B SCALE 15:1 ACTUATOR TERMINAL D D C ±0.2 (5.3) TAIL : PICK UP AREA B 1.9 ±0.2 C (3.95) (4.05) 0.15 ±0.1 (5.25) 1.265 (D) 金具 FITTING NAIL B 4 0.75 ±0.1 0.9 ±0.2 0.4 ±0.15 B SYMBOLS = 0 = 0 = 0 A DOCUMENT STATUS 9 P1 RELEASE DATE 2019/08/13 8 10:02:53 7 6 CONNECTOR SERIES No. 2005281**1 5 4 C SCALE mm 8:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 = 0 3 PLACES ± 0.2 = 0 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 = 0 = 0 10.07 9.07 8.07 7.07 6.07 5.07 12.6 11.6 10.6 9.6 8.6 7.6 8 7 6 5 4 3 14.2 13.2 12.2 11.2 10.2 9.2 D C B A 2005280091 2005280081 2005280071 2005280061 2005280051 2005280041 EMBOSSED PACKAGE オーダー番号 ORDER No. 9 8 7 6 5 4 B Ckt THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 C DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS CURRENT REV DESC: EC NO: 620381 DRWN: JASANUMA CHK'D: YNAITO APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2019/07/10 2019/08/13 2019/08/13 2018/10/05 2018/10/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005281001-SD MATERIAL NUMBER SERIES PSD 000 2 C SHEET NUMBER CUSTOMER A3-SIZE 200528 3 A 1.0 FPC ZIF 2 CONT HSG ASSY 1 OF 4 1 10 9 7 8 A ±0.2 X F 5 6 4 3 (0.4) (4) 1 F 接点位置 LENGTH TO CONTACT POINT (1.05) 0.4 ±0.1 ⌖ 0.2 X INSERTION DEPTH POINT (1.45) 0.5 1 FPC挿入深さ (B) (0.15) 2 接点位置 LENGTH TO CONTACT POINT HOUSING 3.95 E (5.25) ハウジング E アクチュエータ ターミナル SECTION A-A SCALE 15:1 ACTUATOR TERMINAL : PICK UP AREA (5.3) TAIL C ±0.2 D 0.15 ±0.1 (5.25) (4.05) 1.9 ±0.2 A 1.265 (D) C 金具 4 0.75 ±0.1 0.9 ±0.2 0.4 ±0.15 (4.06) FITTING NAIL A B SYMBOLS = 0 = 0 = 0 A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2019/08/13 10:02:53 8 7 CONNECTOR SERIES No. 2005281**1 5 6 C SCALE mm 8:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 = 0 3 PLACES ± 0.2 = 0 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 = 0 = 0 33.6 32.6 31.6 30.6 29.6 28.6 27.6 26.6 25.6 24.6 23.6 22.6 21.6 20.6 19.6 18.6 17.6 16.6 15.6 14.6 13.6 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 35.2 34.2 33.2 32.2 31.2 30.2 29.2 28.2 27.2 26.2 25.2 24.2 23.2 22.2 21.2 20.2 19.2 18.2 17.2 16.2 15.2 D C B A 2005280301 2005280291 2005280281 2005280271 2005280261 2005280251 2005280241 2005280231 2005280221 2005280211 2005280201 2005280191 2005280181 2005280171 2005280161 2005280151 2005280141 2005280131 2005280121 2005280111 2005280101 EMBOSSED PACKAGE 30 29 D 28 27 26 25 24 23 22 21 20 C 19 18 17 16 15 14 13 12 11 B 10 Ckt オーダー番号 ORDER No. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 = 0 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 CURRENT REV DESC: EC NO: 620381 DRWN: JASANUMA CHK'D: YNAITO APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2019/07/10 2019/08/13 2019/08/13 2018/10/05 2018/10/10 SERIES 1.0 FPC ZIF 2 CONT HSG ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005281001-SD MATERIAL NUMBER CUSTOMER A3-SIZE 200528 3 PSD 000 C SHEET NUMBER 2 OF 4 2 1 A 7 5 6 4 3 N+1 +0.1 -0.05 1 ±0.15 0.7 +0.1 -0.05 / 0.3 ±0.03 (*1) 仕上がり厚さ めっき : 金めっき(0.1μm以上) PLATING : GOLD (0.1μm Min.) NICKEL UNDER (1-5μm) 2- R 0.2 MAX. THICKNESS 下地ニッケル(1-5μm) D PLATING : GOLD (0.1μm Min.) 2- R 0.2 MAX. めっき : 金めっき(0.1μm以上) 1.5 ±0.1 2- R 0.2 MAX. (STIFFENER) (PITCH) E 0.3 ±0.05 THICKNESS 5 MIN. (補強板) 1 ±0.05 2- R 0.3 ±0.2 / 0.3 ±0.03 (*1) 仕上がり厚さ 3.5 ±0.3 5 0.3 ±0.05 1.1 ±0.1 0.55 ±0.05 2.2 ±0.05 E 1 *1 : 125°Cを超える環境下で使用する場合に適用。 Apply when use in over 125 deg.C environment. 1 ±0.15 N-1 ±0.05 2 NICKEL UNDER (1-5μm) 8 下地ニッケル(1-5μm) 9 D 適合FPC/FFC推奨寸法 FPC構成推奨仕様 = 0 = 0 = 0 適合FPC/FFC推奨寸法 APPLICABLE FPC/FFC RECOMMENDED DIMENSION 9 RELEASE DATE 2019/08/13 8 10:02:53 C 7 6 5 4 SCALE mm 10:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 = 0 3 PLACES ± 0.2 = 0 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 = 0 P1 STIFFENER : PET 補強板 : ポリエステル系 INSULATING FILM : PET (25μm) 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 絶縁テープ : ポリエステル系 (25μm) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 接着剤(難燃ポリエステル系) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 = 0 DOCUMENT STATUS B STRUCTURE OF FFC SYMBOLS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 C FFC構成推奨仕様 STRUCTURE OF FPC A CONDUCTOR : COPPER FOIL (35μm or 50μm) 導体部 : 銅箔 (35μm or 50μm) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 接着剤(難燃ポリエステル系) INSULATING FILM : PET (25μm) 絶縁テープ : ポリエステル系 (25μm) STIFFENER : POLYIMIDE 補強板：ポリイミド THERMOSETTING ADHESIVE 熱硬化接着剤 BASE FILM : POLYIMIDE (25μm) THERMOSETTING ADHESIVE 熱硬化接着剤 CONDUCTOR : COPPER FOIL (35μm) (STIFFENER) 5 MIN. (補強板) 3.5 ±0.3 B 導体部 : 銅箔 (35μm) (PITCH) 熱硬化接着剤 0.7 +0.1 -0.05 1 ±0.05 2- R 0.3 ±0.2 COVER FILM : POLYIMIDE(25μm) 5 1 ±0.15 N-1 ±0.05 1 ±0.15 カバーレイ : ポリイミド(25μm) N+1 +0.1 -0.05 THERMOSETTING ADHESIVE C ベースフィルム : ポリイミド (25μm) APPLICABLE FPC/FFC RECOMMENDED DIMENSION = 0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS CURRENT REV DESC: EC NO: 620381 DRWN: JASANUMA CHK'D: YNAITO APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2019/07/10 2019/08/13 2019/08/13 2018/10/05 2018/10/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005281001-SD MATERIAL NUMBER SERIES PSD 000 2 C SHEET NUMBER CUSTOMER A3-SIZE 200528 3 A 1.0 FPC ZIF 2 CONT HSG ASSY 3 OF 4 1 9 7 8 3.8 ±0.05 (2) 1 ±0.05 (PITCH) (公差非累積) 1.8 ±0.05 4 3.8 ±0.05 N-1 ±0.05 1.8 ±0.05 (NON-ACCUMULATIVE) (3.1) (2) 2 1 1. 使用材料 MATERIAL ハウジング HOUSING 0.4 ±0.05 ターミナル TERMINAL E : 銅合金 (t=0.15) COPPER ALLOY 金具 : リン青銅 (t=0.15) FITTING NAIL PHOSPHOR BRONZE (0.3) 1.55 ±0.05 : 液晶ポリマー　ガラス充填、UL94V-0 (ベージュ) LIQUID CRYSTAL POLYMER GLASS FILLED, UL94V-0 (BEIGE) アクチュエータ : ポリアミド　ガラス充填、UL94V-0 (黒) ACTUATOR POLYAMIDE GLASS FILLED, UL94V-0 (BLACK) 2. めっき仕様 PLATING ターミナル TERMINAL コンタクト部：部分金めっき (0.05μm以上) CONTACT AREA : SEPARATED GOLD PLATING (0.05μm MINIMUM) 1.3 ±0.05 D 3 注記　NOTES 1 ±0.05 E 5 6 D テール部 : 部分金めっき SOLDER TAIL AREA : SEPARATED GOLD PLATING 　 コネクタ位置 CONNECTOR POSITION REFERENCE SCREEN THICKNESS : 100µm 参考マスク開口率 : 100% RECOMMENDED P.W.B PATTERN LAYOUT A 下地:ニッケルめっき (1.0μm以上) UNDER PLATING : NICKEL PLATING (1.0μm MINIMUM) REFERENCE SCREEN OPEN RATIO : 100% C B 金具 FITTING NAIL 錫めっき (1.0μm以上) TIN PLATING (1.0μm MINIMUM) 参考マスク厚 : 100µm 推奨基板レイアウト 下地:ニッケルめっき (1.0μm以上) UNDERPLATE : NICKEL OVERALL (1.0μm MINIMUM) FPC/FFCについて　ABOUT FPC/FFC 　打ち抜き方向は導体側から補強板側を推奨します。 　導体部については軟箔銅35μmまたは50μmを推奨します。 　FFCに規定された定格温度がFFC単体前提である場合が御座います。 　コネクタと組み合わせての実使用において、接着層が劣化するなどの信頼性を満足できないケースを回避するため、 　実機での評価/確認をお願いいたします。 　RECOMMENDED PUNCHING DIRECTION : FROM CONDUCTOR SIDE TO STIFFENER SIDE 　RECOMMENDED CONDUCTOR SPEC : SOFT COPPER FOIL 　RECOMMENDED CONDUCTOR THICKNESS : 35 MICROMETER OR 50 MICROMETER 　NOTE : WHEN ACTUALLY USING IT WITH CONNECTOR, PLEASE DO THE EVALUATION AND THE 　 CONFIRMATION WITH AN ACTUAL EQUIPMENT TO EVADE THE CASE WHERE RELIABILITY 　 CANNOT BE FILLED (THE ADHESIVE LINE OF FFC IS DETERIORATED ETC.) 3. エンボステープ梱包時は、アクチュエータが閉じた状態とする。 IN THE PACKAGE, ACTUATOR OF PART SHOULD BE CLOSED. 4 パターン剥離止め用金具 FITTING NAIL FOR PREVENTING PEELING OF P.W.B. PATTERN. 5 R0.3はFPC/FFC導体部にかからないこと。 R0.3 MUST NOT BE OVERLAPPED TO PATTERN OF FPC/FFC. 6. N : 極数 SYMBOLS = 0 = 0 = 0 9 RELEASE DATE 2019/08/13 8 10:02:53 C 7 6 5 4 SCALE mm 15:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 = 0 3 PLACES ± 0.2 = 0 2 PLACES ± 0.2 1 PLACE ± 0.25 0 PLACES ± 0.3 = 0 P1 B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 = 0 DOCUMENT STATUS N : CIRCUIT 7. テールと金具を併せた平坦度は0.1mm以下とする。 TAILS AND NAILS COPLANALITY TO BE 0.1mm MAXIMUM. FPCについて　ABOUT FPC 　補強フィルム材質はポリイミドを推奨します。ベースフィルムは25μmを推奨します。 　接着剤は熱硬化接着剤を推奨します。 　尚、接着剤の接点部への付着は導通不良の原因になりますので、染み出しが無い様お願い致します。 　RECOMMENDED STIFFENER MATERIAL : POLYIMIDE 　RECOMMENDED BASE FILM THICKNESS : 25 MICROMETER 　RECOMMENDED ADHESIVE : THERMOSETTING ADHESIVE 　NOTE : PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A 　 POSSIBILITY THAT THE EXTRA ADHESIVE CAUSES THE DEFECT IN ELECTRICAL CONTINUITY. FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 C = 0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS CURRENT REV DESC: EC NO: 620381 DRWN: JASANUMA CHK'D: YNAITO APPR: RTAKEUCHI INITIAL REVISION: DRWN: JASANUMA APPR: RTAKEUCHI THIRD ANGLE PROJECTION DRAWING 2019/07/10 2019/08/13 2019/08/13 2018/10/05 2018/10/10 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005281001-SD MATERIAL NUMBER SERIES PSD 000 2 C SHEET NUMBER CUSTOMER A3-SIZE 200528 3 A 1.0 FPC ZIF 2 CONT HSG ASSY 4 OF 4 1