2011260002

10 9 7 8 5 6 4 引き出し方向 PULL OUT DIRECTION F 3 2 1 NOTES 1. 梱包数量： 300個／リール THE NUMBER OF PACKAGED CONNECTORS: 300 PIECES/REEL REEL 2. F リードテープ長さ LEAD TAPE LENGTH. E 5. 材料 MATERIAL キャリアテープ：ポリスチレン CARRIER TAPE:POLYSTYRENE トップテープ：ポリエチレンテレフタレート、ポリエチレン TOP TAPE:POLYETHYLENE TEREHTHALATE,POLYETHYLENE リール：ポリスチレン(リサイクル材を含む) REEL:POLYSTYRENE(RECYCLE MATERIAL CONTAINED) E 45.4 ±1 49.4 ±1 "D" D 4. 製品詳細寸法については、図面2011261001 000 PSDを参照してください。 FOR DIMENTIONS OF PRODUCT, REFER TO 2011261001 000 PSD. ⌀ 380 ±2 �80� 3. トップテープの剥離強度はIEC60286-3に準拠 COMPLY WITH IEC60286-3 FOR PEEL OFF STRENGTH OF TOP TAPE. D 100 Min. 空ポケット部 EMPTY PART 引き出し方向 PULL OUT DIRECTION (⌀10) C 400 Min. (120 °) (2) C 160Min. 　 2. (22) 末端部 (空部) TAIL PART (EMPTY) 部品挿入部 COMPONENT トップテープリーダー部 TOP TAPE LEADER PART LEAD TAPE LENGTH (⌀21) B B (⌀13) DETAIL "D" THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/12/14 ± 3.0 ° 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:43:25 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 608977 DRWN: NNAITO CHK'D: YMIKI01 APPR: TOSADA INITIAL REVISION: DRWN: YMIKI01 APPR: MSASAO THIRD ANGLE PROJECTION 2018/12/11 2018/12/13 2018/12/14 2015/12/16 2016/08/22 DRAWING SERIES FAKRA JACK R/A EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2011260001 MATERIAL NUMBER CUSTOMER A3-SIZE 201126 3 GENERAL 2 PSD 000 E1 SHEET NUMBER 1 OF 2 1 A 10 9 7 8 5 6 4 3 2 1 F 累積ピッチ40±0.2 4 ±0.1 ACCUMULATIVE PITCH 40±0.2 (2) ⌀ 1.5 +0.1 0 トップテープ TOP PATE 1.75 ±0.1 F E D 44 ±0.3 40.4 ±0.1 23 E D 吸着位置 VACUUM POINT 20112610** B 20 ±0.1 0.5 ±0.05 15 C N M L Z K I H G F E D C B A PASTEL GREEN PASTEL ORANGE CARMINE RED WATER BLUE CURRY YELLOW BEIGE VIOLET GRAY BROWN GREEN BORDEAUX VIOLET BLUE CREAM WHITE BLACK KEYING CODE COLOR 1.5 +0.1 0 0.2 ±0.05 引き出し方向 PULL OUT DIRECTION B DETAIL B SCALE 10:1 N/A 2011261013 2011261012 2011261011 2011261010 2011261009 2011261008 N/A 2011261006 2011261005 2011261004 2011261003 2011261002 2011261001 N/A 2011260013 2011260012 2011260011 2011260010 2011260009 2011260008 N/A 2011260006 2011260005 2011260004 2011260003 2011260002 2011260001 EMBOSSED PACKAGE C B CONNECTOR MATERIAL NO. オーダー番号 ORDER NO. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/12/14 ± 3.0 ° 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:43:25 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 608977 DRWN: NNAITO CHK'D: YMIKI01 APPR: TOSADA INITIAL REVISION: DRWN: YMIKI01 APPR: MSASAO THIRD ANGLE PROJECTION 2018/12/11 2018/12/13 2018/12/14 2015/12/16 2016/08/22 DRAWING SERIES FAKRA JACK R/A EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2011260001 MATERIAL NUMBER CUSTOMER A3-SIZE 201126 3 GENERAL 2 PSD 000 E1 SHEET NUMBER 2 OF 2 1 A 9 7 8 19.5 ±0.25 センターコンタクト CENTER CONTACT 2.75 ±0.2 0.35 1 2.5 5.08 5.08 +0.29 -0.2 1.52 ±0.15 E 0.325 アウターコンタクト OUTER CONTACT ネイルプレート NAIL PLATE F D インシュレーター INSULATOR シュラウド SHROUD 1.35 0.4 9.5 ±0.2 2 2. メッキ仕様 PLATING センターコンタクト　CENTER CONTACT 接点部：部分金メッキ(0.05μm以上) 半田付け部：錫メッキ 下地メッキ：ニッケルメッキ CONTACT AREA:SEPARATED GOLD PLATING 　　　　　　　　　(0.05 MICROMETER MINIMUM) SOLDER AREA:TIN UNDER-PLATING:NICKEL アウターコンタクト　OUTER CONTACT 接点部：ニッケルメッキ 半田付け部：錫メッキ 下地メッキ：ニッケルメッキ CONTACT AREA:NICKEL SOLDER AREA:TIN UNDER-PLATING:NICKEL ネイルプレート　NAIL PLATE 半田付け部：部分金メッキ 下地メッキ：ニッケルメッキ SOLDER AREA:SEPARATED GOLD PLATING UNDER-PLATING:NICKEL 10 �4.8� 9.45 ±0.15 0.7 C 3 11.05 ±0.25 10 +0.15 -0.2 D 4 注記 NOTE 1. 使用材料 MATERIAL センターコンタクト ：黄銅 CENTER CONTACT BRASS インシュレータ ：液晶ポリマー　ガラス充填、UL94V-0(黒色) INSULATOR LIQUID CRYSTAL POLYMER GLASS FILLED, UL94V-0(BLACK) アウターコンタクト ：リン青銅 OUTER CONTACT PHOSPHOR BRONZE シュラウド ：ポリアミド (色はSHEET3参照) SHROUD POLYAMIDE GLASS FILLED (COLOR:SEE SHEET 3) ネイルプレート ：リン青銅 NAIL PLATE PHOSPHOR BRONZE F E 5 6 0.2 10 C 4.4 7.3 1 1.95 1.5 B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A 0.6 5.98 ±0.35 DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/12/14 ± 3.0 ° 4 PLACES ± 0.1 3 PLACES ± 0.1 2 PLACES ± 0.1 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:43:27 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 608977 DRWN: NNAITO CHK'D: YMIKI01 APPR: TOSADA INITIAL REVISION: DRWN: YMIKI01 APPR: MSASAO THIRD ANGLE PROJECTION 2018/12/11 2018/12/13 2018/12/14 2015/12/16 2016/08/22 DRAWING SERIES A3-SIZE 201126 3 FAKRA JACK R/A ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2011261001 MATERIAL NUMBER CUSTOMER SEE SHEET 3 2 GENERAL PSD 000 G1 SHEET NUMBER 1 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 (10) (1.5) F 0.7 ±0.05 5.08 ±0.05 F 3.4 2.8 ±0.05 1.3 (1) 半田印刷禁止エリア PROHIBITED AREA FOR SOLDER 1.25 (1.52) 1.1 MAX. (4.4) (7.3) ⌀ 1.8 2 MIN. 2.7 MIN. 1 MIN. 0.65 ±0.05 9.5 ±0.05 5.08 ±0.05 E (10) E 1.55 MIN. D D ⌀ 1.2 ±0.05 1.65 ±0.05 2.25 (5.98) スタンドオフ位置 STAND-OFF POSITION C 基板端 PWB EDGE C 推奨基板レイアウト 板厚：1.6mm RECOMMENDED P.W.B. PATTERN LAYOUT (THICKNESS 1.6mm) B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/12/14 ± 3.0 ° 4 PLACES ± 0.1 3 PLACES ± 0.1 2 PLACES ± 0.1 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:43:27 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 608977 DRWN: NNAITO CHK'D: YMIKI01 APPR: TOSADA INITIAL REVISION: DRWN: YMIKI01 APPR: MSASAO THIRD ANGLE PROJECTION 2018/12/11 2018/12/13 2018/12/14 2015/12/16 2016/08/22 DRAWING SERIES A3-SIZE 201126 3 FAKRA JACK R/A ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2011261001 MATERIAL NUMBER CUSTOMER SEE SHEET 3 2 GENERAL PSD 000 G1 SHEET NUMBER 2 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 F F CODE-A E CODE-B CODE-C E CODE-E CODE-D D D CODE-F CODE-G CODE-H CODE-I CODE-Z CODE-L CODE-M CODE-N CODE-K N N/A PASTEL GREEN M 2011261013 PASTEL ORANGE L 2011261012 CARMINE RED Z WATER BLUE 2011261011 K 2011261010 CURRY YELLOW I 2011261009 BEIGE H 2011261008 C VIOLET N/A G GRAY F 2011261006 BROWN E 2011261005 GREEN D BORDEAUX VIOLET 2011261004 BLUE 2011261003 C B 2011261002 CREAM WHITE A 2011261001 BLACK KEYING MATERIAL No. COLOR CODE C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/12/14 ± 3.0 ° 4 PLACES ± 0.1 3 PLACES ± 0.1 2 PLACES ± 0.1 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 03:43:27 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 608977 DRWN: NNAITO CHK'D: YMIKI01 APPR: TOSADA INITIAL REVISION: DRWN: YMIKI01 APPR: MSASAO THIRD ANGLE PROJECTION 2018/12/11 2018/12/13 2018/12/14 2015/12/16 2016/08/22 DRAWING SERIES A3-SIZE 201126 3 FAKRA JACK R/A ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2011261001 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 G1 SHEET NUMBER 3 OF 3 1 A