2011970220

9 7 8 E NOTES: 4 3 2.リードテープ長さ LEAD TAPE LENGTH トップテープ 100MIN. D ⌀ 1.5 +0.10 0 �24� (PITCH) 4 ±0.1 (累積ピッチ:40±0.2) (ACCUMULATIVE PITCH:40±0.2) 部品挿入部 末端部�空部� 160 MIN COMPONENT SUPPLIER TAIL PART �EMPTY� D エンボステープ REEL 引き出し方向 PULL OUT DIRECTION 引き出し方向 PULL OUT DIRECTION 78.1 73.5 68.4 34.2 72 +0.4 -0.3 61.4 57.4 52.4 26.2 56 ±0.3 REEL ⌀380 ±2.0 ⌀ 380 ±2.0 C D ±1.0 エンボステープ幅　32,44,56mm対応 E ±1.0 �22� 2017/08/15 2017/08/24 2017/08/24 0°� �22� E ±1.0 120503 MHAYASHI KOMURAKAMI TKANEKO �⌀ 13� RELEASE DATE 24.08.2017 8 EC NO: DRWN: CHK'D: APPR: DETAIL G A 10:43:17 7 6 5 REV DETAIL F GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° �2� �⌀ 13� 9 32 ± 0.3 D C B A 201197 040* 201197 038* 201197 036* 201197 034* 201197 032* 201197 030* 201197 028* 201197 026* 201197 024* 201197 022* 201197 020* 201197 018* 201197 016* 201197 014* 201197 012* 201197 010* 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 C B 極数 エンボステープ幅 オーダー番号 CKT NO. ORDER NO. WIDTH OF TAPE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION �⌀ 21� A P1 37.4 33.4 28.4 14.2 E �12 0°� �⌀ 21� RELEASE STATUS 44 ± 0.3 �8� �12 �2� D ±1.0 エンボステープ幅　72mm対応 �⌀ 10� �⌀ 10� FORMAT: tb-prod-A3 REVISION: G DATE: 2015/12/14 49.4 45.4 40.4 20.2 DETAIL G DETAIL F B E EMBOSSED TAPE 1.75 ±0.1 �2� 1 4.製品詳細寸法については製品単体図面を参照して下さい。 FOR THE DETAIL OF CONNECTOR DIMENSIONS, PLEASE REFER TO THE DRAWING OF CONNECTOR. 引き出し方向 PULL OUT DIRECTION (B) A C ±0.1 トップテープ接着部（空エンボス） TOP TAPE BONDED PART(EMPTY) 400MIN 2 3.材料 MATERIALS キャリアテープ：ポリスチレン(PS) CARRIER TAPE : POLYSTYRENE(PS) トップテープ：ポリエステル(PET)、その他 TOP TAPE：POLYESTER(PET)、OTHER リール：ポリスチレン(PS) リサイクル材を含む REEL：POLYSTYRENE(PS) RECYCLE MATERIAL CONTAINED 1.梱包数量：380/リール NUMMBER OF CONNECTORS：380PIECES/REEL TOP TAPE 引き出し方向 PULL OUT DIRECTION 5 6 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE mm NTS DRWN BY DATE 2017/08/15 MHAYASHI 2017/08/24 KOMURAKAMI APPR BY TKANEKO DRAWING SIZE SPOT-ON 2.0 W/B DUAL ROW EMBSTP PKG DATE CHK'D BY A DATE 2017/08/24 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 201197 SEE CHART DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER 2011970300-SD 3 CUSTOMER 2 PSD 1 OF 2 000 1 9 7 8 6 5 4 3 2 1 E E D D BLUE 201197 0404 201197 0384 201197 0364 201197 0344 201197 0324 201197 0304 201197 0284 201197 0264 201197 0244 201197 0224 201197 0204 201197 0184 201197 0164 201197 0144 201197 0124 201197 0104 C B YELLOW 201197 0403 201197 0383 201197 0363 201197 0343 201197 0323 201197 0303 201197 0283 201197 0263 201197 0243 201197 0223 201197 0203 201197 0183 201197 0163 201197 0143 201197 0123 201197 0103 RED 201197 0402 201197 0382 201197 0362 201197 0342 201197 0322 201197 0302 201197 0282 201197 0262 201197 0242 201197 0222 201197 0202 201197 0182 201197 0162 201197 0142 201197 0122 201197 0102 BLACK 201197 0401 201197 0381 201197 0361 201197 0341 201197 0321 201197 0301 201197 0281 201197 0261 201197 0241 201197 0221 201197 0201 201197 0181 201197 0161 201197 0141 201197 0121 201197 0101 NATURAL HSG COLOR 201197 0400 40 201197 0380 38 201197 0360 36 201197 0340 34 201197 0320 32 201197 0300 30 C 201197 0280 28 201197 0260 26 201197 0240 24 201197 0220 22 201197 0200 20 201197 0180 18 201197 0160 16 201197 0140 14 B 201197 0120 12 201197 0100 10 エンボス梱包　ENBOSSED PKG 極数 CKT NO. オーダー番号　ORDER NO. 2017/08/15 2017/08/24 2017/08/24 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) 120503 MHAYASHI KOMURAKAMI TKANEKO ANGULAR TOL ± 3.0 ° RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2017/02/06 9 P1 RELEASE DATE 24.08.2017 8 A 10:43:17 7 6 5 REV EC NO: DRWN: CHK'D: APPR: A 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE mm NTS DRWN BY DATE 2017/08/15 MHAYASHI 2017/08/24 KOMURAKAMI APPR BY TKANEKO DRAWING SIZE SPOT-ON 2.0 W/B DUAL ROW EMBSTP PKG DATE CHK'D BY A DATE 2017/08/24 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 201197 SEE CHART DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER 2011970300-SD 3 CUSTOMER 2 PSD 2 OF 2 000 1 7 8 C CIRCUIT No.1 4 5.25 12.1 ±0.25 D 3 �0.4� D CIRCUIT No.2 B 2.1 �0.5� 2 (PITCH) CIRCUIT No.N 5 5 5 5 5 4 4 4 3 3 3 2 2 2 1 1 2.1 3.65 A �4.2� 5.25 SECTION A-A A �0.1� 9 C A �0.6� 部品 PART ポリアミド(PA)、ガラス充填、UL94 V-0 POLYAMDE(PA),GLASS FILLED, UL94 V-0 黄銅 BRASS ターミナル TERMINAL 錫めっき、リフロー処理(前めっき) ： 1.0μm以上 PRE-TIN PLATED (HEAT TREATED MATTE TIN)：1.0 micro-meter MIN. 銅めっき(下地) ： 0.5μm以上 COPPER (UNDER PLATING)：0.5 micro-meter MIN. 120503 MHAYASHI KOMURAKAMI TKANEKO 錫めっき：1.0μm以上 MATTE TIN ： 1.0 micro-meter MIN. EC NO: DRWN: CHK'D: APPR: ネイル NAIL ニッケルめっき(下地)：1.0μm以上 NICKEL (UNDER PLATING)： 1.0 micro-meter MIN. RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 24.08.2017 8 10:43:19 7 6 1 5 16 15 14 13 12 11 10 9 8 7 6 5 4 3 ----- D 44.4 42.4 40.4 38.4 36.4 34.4 32.4 30.4 28.4 26.4 24.4 22.4 20.4 18.4 16.4 14.4 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 A B C 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 201197040* 201197038* 201197036* 201197034* 201197032* 201197030* 201197028* 201197026* 201197024* 201197022* 201197020* 201197018* 201197016* 201197014* 201197012* 201197010* エンボス梱包 EMBOSSED PKG オーダー番号 ORDER NO. E D C B 極数 CKT NO. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 黄銅 BRASS A 6 6 6 6 6 6 6 6 ----------------- NAIL QTY A REV ハウジング HOUSING 材質 MATERIAL 2017/08/15 2017/08/24 2017/08/24 B 2 NOTE 1.嵌合相手：201196 2*** MATE WITH:201196 2*** 2.ターミナル及びネイルの平坦度：0.1MAX. TERMINAL AND NAIL COPLANARITY TO BE 0.1MAX. 3.製品番号 MATERIAL NO. NO. COLOR KEY TYPE 2011970 ** * 0 NATURAL 1 1 2 BLACK 色 キータイプ 極数 COLOR KEY TYPE CIRCUIT SIZE RED 2 3 4 3 YELLOW 4 BLUE 5 CIRCUIT No.N-1 C D E 5 6 �0.5� 9 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 SCALE mm 4:1 DRWN BY DATE 2017/08/15 MHAYASHI DATE CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS 2017/08/24 KOMURAKAMI APPR BY TKANEKO DRAWING SIZE SPOT-ON 2.0 W/B DUAL ROW SMT PLUG ASSY A DATE 2017/08/24 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 201197 SEE CHART DOCUMENT NUMBER 3 CUSTOMER DOC TYPE DOC PART SHEET NUMBER 2011971300-SD 2 PSD 000 1 1 OF 3 9 5 6 4 3 2 MATING KEY TYPE & COLOR �12.6� WITH RETAINER �7.1� �4.4� �7.1� �1.7� KEY TYPE:4 MAT No.:2011970**3 COLOR:YELLOW D BLUE 201197 0404 201197 0384 201197 0364 201197 0344 201197 0324 201197 0304 201197 0284 201197 0264 201197 0244 201197 0224 201197 0204 201197 0184 201197 0164 201197 0144 201197 0124 201197 0103 �1.7� KEY TYPE:3 MAT No.:2011970**2 COLOR:RED B 201197 **** PLUG ASSY 嵌合寸法 MATED DIMENSION KEY TYPE:2 MAT No.:2011970**1 COLOR:BLACK C E 201196 2*** REC HSG KEY TYPE:1 MAT No.:2011970**0 COLOR:NATURAL D 1 201196 4**0 RETAINER �14.0� E 7 8 YELLOW 201197 0403 201197 0383 201197 0363 201197 0343 201197 0323 201197 0303 201197 0283 201197 0263 201197 0243 201197 0223 201197 0203 201197 0183 201197 0163 201197 0143 201197 0123 201197 0103 RED 201197 0402 201197 0382 201197 0362 201197 0342 201197 0322 201197 0302 201197 0282 201197 0262 201197 0242 201197 0222 201197 0202 201197 0182 201197 0162 201197 0142 201197 0122 201197 0102 BLACK 201197 0401 201197 0381 201197 0361 201197 0341 201197 0321 201197 0301 201197 0281 201197 0261 201197 0241 201197 0221 201197 0201 201197 0181 201197 0161 201197 0141 201197 0121 201197 0101 NATURAL HSG COLOR 201197 0400 40 201197 0380 38 201197 0360 36 201197 0340 34 201197 0320 32 201197 0300 30 C 201197 0280 28 201197 0260 26 201197 0240 24 201197 0220 22 201197 0200 20 201197 0180 18 201197 0160 16 201197 0140 14 B 201197 0120 12 201197 0100 10 エンボス梱包　EMBOSSED PKG 極数 CKT NO. オーダー番号　ORDER NO. 2017/08/15 2017/08/24 2017/08/24 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) 120503 MHAYASHI KOMURAKAMI TKANEKO RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 24.08.2017 8 A 10:43:19 7 6 5 REV EC NO: DRWN: CHK'D: APPR: A �7.1� KEY TYPE:5 MAT No.:2011970**4 COLOR:BLUE �1.7� ANGULAR TOL ± 3.0 ° 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 SCALE mm DATE 2017/08/15 MHAYASHI DATE TKANEKO DRAWING SIZE SPOT-ON 2.0 W/B DUAL ROW SMT PLUG ASSY 2017/08/24 KOMURAKAMI APPR BY NTS 2:1 DRWN BY CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS A DATE 2017/08/24 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 201197 SEE CHART DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER 2011971300-SD 3 CUSTOMER 2 PSD 2 OF 3 000 1 9 7 8 5 6 4 3 2 1 E E C ±0.1 10P-12P C ±0.1 D ±0.05 D ±0.05 4.4 ±0.1 CIRCUIT No.1 C ±0.1 14P-18P 6.6 ±0.1 1.35 ±0.05 CIRCUIT No.N-1 D C ±0.1 C ±0.1 5 ±0.1 1.35 ±0.05 �2.7� 1.4 ±0.05 D C ±0.1 1.4 ±0.05 20P-24P CIRCUIT No.N C CIRCUIT No.2 2 ±0.05 (PITCH) C 1.4 ±0.05 C ±0.1 公差非累積 NON-ACCUMLATIVE D ±0.05 C ±0.1 D ±0.05 B ±0.1 26P-30P (SCALE=4/1) 32P-40P 推奨基板レイアウト RECOMMENDED PWB PATTERN LAYOUT (参考：メタルマスク厚さ：120μm, マスク開口率100%) (REFERENCE：STENCIL THICKNESS：120μm,APERTURE RATIO：100%) B B 2017/08/15 2017/08/24 2017/08/24 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) 120503 MHAYASHI KOMURAKAMI TKANEKO ANGULAR TOL ± 3.0 ° RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 24.08.2017 8 A 10:43:19 7 6 5 REV EC NO: DRWN: CHK'D: APPR: A 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 SCALE mm DATE 2017/08/15 MHAYASHI DATE TKANEKO DRAWING SIZE SPOT-ON 2.0 W/B DUAL ROW SMT PLUG ASSY 2017/08/24 KOMURAKAMI APPR BY NTS 2:1 DRWN BY CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS A DATE 2017/08/24 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 201197 SEE CHART DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER 2011971300-SD 3 CUSTOMER 2 PSD 3 OF 3 000 1