2012010130

10 9 7 8 5 6 4 NOTES: 1.梱包数量：570個/リール NUMMBER OF CONNECTORS：570PIECES/REEL F 2.リードテープ長さ LEAD TAPE LENGTH 引き出し方向 PULL OUT DIRECTION 56mmテープ幅 TAPE WIDTH:56mm E トップテープ接着部（空エンボス） TOP TAPE BONDED PART(EMPTY) C ±0.1 400MINIMUM C ±0.1 24mmテープ幅 TAPE WIDTH:24mm 2 1 3.材料 MATERIALS エンボステープ：ポリスチレン(PS) EMBOSSED TAPE : POLYSTYRENE(PS) トップテープ：ポリエステル(PET)、その他 TOP TAPE：POLYESTER(PET)、OTHER リール：ポリスチレン(PS) リサイクル材を含む REEL：POLYSTYRENE(PS) RECYCLE MATERIAL CONTAINED F 4.製品詳細寸法については製品単体図面を参照して下さい。 FOR THE DETAIL OF CONNECTOR DIMENSIONS, PLEASE REFER TO THE DRAWING OF CONNECTOR. 引き出し方向 PULL OUT DIRECTION 32mmテープ幅 TAPE WIDTH:32mm C ±0.1 A 44mmテープ幅 TAPE WIDTH:44mm 部品挿入部 末端部�空部� 160 MINIMUM COMPONENT SUPPLIER TAIL PART �EMPTY� E D (B) D 100MINIMUM 3 �2� �16� (PITCH) トップテープ TOP TAPE 1.75 ±0.1 ⌀ 1.5 +0.1 0 エンボステープ EMBOSSED TAPE �⌀ 10� 61.4 57.4 52.4 26.2 56 ±0.3 �22� C REEL 引き出し方向 PULL OUT DIRECTION �2� 0°� (ACCUMULATIVE PITCH:40±0.2) �12 4 ±0.1 (累積ピッチ:40±0.2) 49.4 45.4 40.4 20.2 44 ±0.3 �⌀ 21� �⌀ 13� 37.4 33.4 28.4 14.2 32 ± 0.3 ⌀ 380 ±2.0 DETAIL E B 29.4 25.4 E DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) D ±1.0 A E ±1.0 DOCUMENT STATUS 10 P1 B C A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DETAIL E FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 D 11.5 24 +0.3 -0.1 - 16 201201 016* 15 201201 015* 14 201201 014* 13 201201 013* 12 201201 012* C 11 201201 011* 10 201201 010* 9 201201 009* 8 201201 008* 7 201201 007* 6 201201 006* 5 201201 005* 4 201201 004* 3 201201 003* B 2 201201 002* 極数 オーダー番号 ORDER NO. CIRCUIT NO. RELEASE DATE 9 2018/09/25 ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:10:54 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: EC NO: 602476 DRWN: TENAGASE CHK'D: KOMURAKAMI APPR: TKANEKO INITIAL REVISION: DRWN: MHAYASHI APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2018/08/07 2018/09/21 2018/09/25 2017/08/15 2017/08/24 SERIES A3-SIZE 201201 3 SPOT-ON 2.0W/B SINGLE ROW SMT PLUG ASSEMBLY EMBOSSED TAPE PACKAGE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012010060-SD MATERIAL NUMBER CUSTOMER SEE SHEET 2 2 GENERAL PSD 000 B SHEET NUMBER 1 OF 2 1 A 10 9 8 7 6 5 4 3 2 1 F F E E D D BLUE 201201 0164 201201 0154 201201 0144 201201 0134 201201 0124 201201 0114 201201 0104 201201 0094 201201 0084 201201 0074 201201 0064 201201 0054 201201 0044 201201 0034 201201 0024 C B YELLOW 201201 0163 201201 0153 201201 0143 201201 0133 201201 0123 201201 0113 201201 0103 201201 0093 201201 0083 201201 0073 201201 0063 201201 0053 201201 0043 201201 0033 201201 0023 RED 201201 0162 201201 0152 201201 0142 201201 0132 201201 0122 201201 0112 201201 0102 201201 0092 201201 0082 201201 0072 201201 0062 201201 0052 201201 0042 201201 0032 201201 0022 BLACK 201201 0161 201201 0151 201201 0141 201201 0131 201201 0121 201201 0111 201201 0101 201201 0091 201201 0081 201201 0071 201201 0061 201201 0051 201201 0041 201201 0031 201201 0021 NATURAL HOUSING COLOR 201201 0160 16 201201 0150 15 201201 0140 14 201201 0130 13 201201 0120 12 201201 0110 11 C 201201 0100 10 201201 0090 9 201201 0080 8 7 201201 0070 201201 0060 6 5 201201 0050 4 201201 0040 201201 0030 3 B 201201 0020 2 エンボステープ梱包　EMBOSSED TAPE PACKAGE 極数 CIRCUIT NO. オーダー番号　ORDER NO. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/09/25 ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:10:54 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: EC NO: 602476 DRWN: TENAGASE CHK'D: KOMURAKAMI APPR: TKANEKO INITIAL REVISION: DRWN: MHAYASHI APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2018/08/07 2018/09/21 2018/09/25 2017/08/15 2017/08/24 SERIES A3-SIZE 201201 3 SPOT-ON 2.0W/B SINGLE ROW SMT PLUG ASSEMBLY EMBOSSED TAPE PACKAGE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012010060-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 B SHEET NUMBER 2 OF 2 1 A 10 9 7 8 5 6 4 Ｂ (2) (PITCH) 1.45 偶数極に適用 APPLICABLE EVEN NUMBER �0.5� (1) E (Ｄ) �0.4� (Ｄ) (C) 5.25 2.1 (C) ① ハウジング A HOUSING 9 D B 番号 NO. 部品 PART ① ハウジング HOUSING TERMINAL �0.1� NAIL C A ② ターミナル ③ ネイル 材質 MATERIAL ポリアミド(PA)、ガラス充填、UL94 V-0 POLYAMDE(PA),GLASS FILLED, UL94 V-0 黄銅 BRASS ② 銅めっき(下地) COPPER (UNDER PLATING)： 0.5 MICRO-METER MINIMUM A ネイル NAIL DOCUMENT STATUS 10 P1 錫めっき MATTE TIN ： 1.0 MICRO-METER MINIMUM RELEASE DATE 9 6 6 6 6 ----------------------D DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) ニッケルめっき(下地) NICKEL (UNDER PLATING)： 1.0 MICRO-METER MINIMUM FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 2018/09/25 7 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:10:56 8 F E 12 11 10 9 8 7 6 5 4 3 ----------C 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 36.4 34.4 32.4 30.4 28.4 26.4 24.4 22.4 20.4 18.4 16.4 14.4 13.4 11.4 9.4 A B 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 201201 016* 201201 015* 201201 014* 201201 013* 201201 012* 201201 011* 201201 010* 201201 009* 201201 008* 201201 007* 201201 006* 201201 005* 201201 004* 201201 003* 201201 002* エンボステープ梱包 EMBOSSED TAPE PACKAGE オーダー番号 ORDER NO. D C 極数 B CIRCUIT NO. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 黄銅 BRASS ③ 5 4 4 4 3 3 3 2 2 2 1 1 1 1 1 NAIL QUANTITY 錫めっき、リフロー処理(前めっき) PRE-TIN PLATED (HEAT TREATED MATTE TIN)： 1.0 MICRO-METER MINIMUM ターミナル TERMINAL 1 SECTION A-A A �0.6� 2 NOTE 1.嵌合相手：201200 2*** MATE WITH:201200 2*** 2.ターミナル及びネイルの平坦度：0.1MAXIMUM TERMINAL AND NAIL COPLANARITY TO BE 0.1MAXIMUM 3.製品番号 MATERIAL NO. NO. COLOR KEY TYPE 201201 0 ** * 0 NATURAL 1 1 2 BLACK 色 キータイプ 極数 COLOR KEY TYPE CIRCUIT SIZE RED 2 3 4 3 YELLOW 4 BLUE 5 8.3 F 3 6 5 4 CURRENT REV DESC: EC NO: 602476 DRWN: TENAGASE CHK'D: KOMURAKAMI APPR: TKANEKO INITIAL REVISION: DRWN: MHAYASHI APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2018/08/07 2018/09/25 2018/09/25 2017/08/15 2017/08/24 SERIES A3-SIZE 201201 3 SPOT-ON 2.0W/B SINGLE ROW SMT PLUG ASSEMBLY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012011060-SD MATERIAL NUMBER CUSTOMER SEE SHEET 2 2 GENERAL PSD 000 B SHEET NUMBER 1 OF 3 1 A 7 8 6 2 1 201196 4**0 RETAINER (12.6) (14.0) WITH RETAINER �1.5� E 201201 **** PLUG ASSEMBLY 嵌合寸法 MATED DIMENSION �3.3� �3.4� KEY TYPE:3 ORDER No:2012010**2 COLOR:RED D KEY TYPE:4 ORDER No.:2012010**3 COLOR:YELLOW �3.3� �3.4� �1.5� �1.9� BLUE �3.3� �3.4� �1.5� �1.9� C KEY TYPE:5 ORDER No.:2012010**4 COLOR:BLUE 3 �1.5� �1.9� KEY TYPE:2 ORDER No.:2012010**1 COLOR:BLACK D 4 201200 2*** RECEPTACLE HOUSING �1.9� KEY TYPE:1 ORDER No.:2012010**0 COLOR:NATURAL E 5 F MATING KEY TYPE & COLOR �3.4� F 9 �3.3� 10 5~16CKT対応 FOR 5~16CKT 2~4CKT対応 FOR 2~4CKT B YELLOW BLACK RED NATURAL HOUSING COLOR 16 15 14 13 12 11 C 10 201201 0164 201201 0163 201201 0162 201201 0161 201201 0160 201201 0154 201201 0153 201201 0152 201201 0151 201201 0150 201201 0144 201201 0143 201201 0142 201201 0141 201201 0140 201201 0134 201201 0133 201201 0132 201201 0131 201201 0130 201201 0124 201201 0123 201201 0122 201201 0121 201201 0120 201201 0114 201201 0113 201201 0112 201201 0111 201201 0110 201201 0104 201201 0103 201201 0102 201201 0101 201201 0100 201201 0094 201201 0093 201201 0092 201201 0091 201201 0090 9 201201 0084 201201 0083 201201 0082 201201 0081 201201 0080 8 7 201201 0074 201201 0073 201201 0072 201201 0071 201201 0070 201201 0064 201201 0063 201201 0062 201201 0061 201201 0060 6 5 201201 0054 201201 0053 201201 0052 201201 0051 201201 0050 4 201201 0044 201201 0043 201201 0042 201201 0041 201201 0040 201201 0034 201201 0033 201201 0032 201201 0031 201201 0030 3 B 201201 0024 201201 0023 201201 0022 201201 0021 201201 0020 2 エンボステープ梱包　EMBOSSED TAPE PACKAGE 極数 CIRCUIT NO. オーダー番号　ORDER NO. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/09/25 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:10:56 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: EC NO: 602476 DRWN: TENAGASE CHK'D: KOMURAKAMI APPR: TKANEKO INITIAL REVISION: DRWN: MHAYASHI APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2018/08/07 2018/09/25 2018/09/25 2017/08/15 2017/08/24 SERIES A3-SIZE 201201 3 SPOT-ON 2.0W/B SINGLE ROW SMT PLUG ASSEMBLY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012011060-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 B SHEET NUMBER 2 OF 3 1 A 10 9 7 8 6 5 4 3 2 1 F F B ±0.1 1 2 ±0.05 (PITCH) 公差非累積 NON-ACCUMLATIVE 偶数極に適用 APPLICABLE EVEN NUMBER CIRCUIT No.1 2P-6P 1.40 ±0.05 CIRCUIT No.N E 1.4 ±0.05 6.6 ±0.1 E 7P-9P 4.4 ±0.1 D ±0.05 D D ±0.05 C ±0.1 D 10P-12P C ±0.1 16P C ±0.1 C ±0.1 13P-15P 推奨基板レイアウト RECOMMENDED PWB PATTERN LAYOUT (参考：メタルマスク厚さ：120μm. マスク開口率100%) (REFERENCE:STENCIL THICKNESS:120μm APERTURE RATIO:100%) C C ±0.1 1.35 ±0.1 C ±0.1 D ±0.05 C ±0.1 C D ±0.05 C ±0.1 B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/09/25 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:10:56 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: EC NO: 602476 DRWN: TENAGASE CHK'D: KOMURAKAMI APPR: TKANEKO INITIAL REVISION: DRWN: MHAYASHI APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2018/08/07 2018/09/25 2018/09/25 2017/08/15 2017/08/24 SERIES SPOT-ON 2.0W/B SINGLE ROW SMT PLUG ASSEMBLY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2012011060-SD MATERIAL NUMBER CUSTOMER A3-SIZE 201201 3 GENERAL 2 PSD 000 B SHEET NUMBER 3 OF 3 1 A