2024370603

10 9 7 8 5 6 3 100 MIN. �⌀80� E ⌀ 380 ±2 PULL OUT DIRECTION F TOP TAPE BONDED PART (EMPTY) COMPONENT SUPPLIER 　 400 MIN. E TAIL PART (EMPTY) 160 MIN. 4. TOP TAPE PEEL FORCE IS DEFINED BY IEC60286-3. 5. MATERIAL CARRIER TAPE : POLYSTYRENE TOP TAPE : PET , OTHER REEL : POLYSTYRENE (PS)＜RECYCLE MATERIAL CONTAINED＞ 6. ELV AND RoHS COMPLIANT B ±1 C ±1 "D" 1 1. RE DETAILED DIMENSION, SEE PRODUCT DRAWING. 2. NUMBER OF CONNECTORS : 15000PCS/REEL 3. LEAD TAPE LENGTH PULL OUT DIRECTION D 2 NOTES REEL F 4 D (⌀10) C C (120 °) (22) (2) B B (⌀21) MODEL NO. 2024370**3 (⌀13) SYMBOLS = 0 DETAIL "D" = 0 = 0 A 10 P1 RELEASE DATE 9 2019/01/09 09:57:31 8 C 7 6 5 SCALE mm 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.03 = 0 3 PLACES ± 0.03 = 0 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 = 0 DOCUMENT STATUS DIMENSION UNITS = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION = 0 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 CURRENT REV DESC: EC NO: 609517 DRWN: NOKIMOTO CHK'D: KTANAKA03 APPR: TKUSUHARA01 INITIAL REVISION: DRWN: NOKIMOTO APPR: TKUSUHARA01 THIRD ANGLE PROJECTION DRAWING 2018/12/21 2019/01/09 2019/01/09 2018/06/08 2018/11/30 SERIES 0.35 BB HB8 PLUG EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2024370000 MATERIAL NUMBER CUSTOMER A3-SIZE 202437 3 GENERAL 2 PSD 002 B SHEET NUMBER 1 OF 2 1 A 10 9 7 8 5 6 4 3 2 1 PULL OUT DIRECTION F F �2.16� �4� �1.08� (0.88) C TOP TAPE (1.18) D (A) (11.5) 1.75 ±0.1 (A) 0.3 ±0.05 24 ±0.3 (2.16) E SECTION C-C (2) SECTION D-D D C E D D ACCUMULATIVE PITCH 40±0.2 4 ±0.1 ⌀ 1.5 +0.1 0 C C 24 11.93 29.4 25.4 10.18 8.43 キャリアテープ幅 CARRIER TAPE C WIDTH B B (A) ORDER NO. SYMBOLS = 0 = 0 = 0 A DOCUMENT STATUS 10 P1 RELEASE DATE 9 2019/01/09 09:57:31 8 C 7 6 5 SCALE mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.03 = 0 3 PLACES ± 0.03 = 0 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 = 0 = 0 60 50 40 ------HIGH VOL. LOW VOL. TOOL TOOL SAMPLE PREPARATION ○:TOOLED △:WOOK IN PROCESS ---:TOOLING TO BE CONFIRMED ○ ○ ○ CIRCUIT B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 2024370603 2024370503 2024370403 EMBOSSED TAPE PACKAGE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 CURRENT REV DESC: EC NO: 609517 DRWN: NOKIMOTO CHK'D: KTANAKA03 APPR: TKUSUHARA01 INITIAL REVISION: DRWN: NOKIMOTO APPR: TKUSUHARA01 THIRD ANGLE PROJECTION DRAWING 2018/12/21 2019/01/09 2019/01/09 2018/06/08 2018/11/30 SERIES 0.35 BB HB8 PLUG EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2024370000 MATERIAL NUMBER CUSTOMER A3-SIZE 202437 3 GENERAL 2 PSD 002 B SHEET NUMBER 2 OF 2 1 A TERMINAL WIDTH HOUSING FITTING NAIL TERMINAL 0.20 ±0.05 C B 10 P1 RELEASE DATE 9 2020/06/23 TERMINAL WIDTH B+2.9 MIN. 6 F 1.46 ±0.01 E RECOMMENDED METAL MASK LAYOUT(REFERENCE) RECOMMENDED THICKNESS OF METAL MASK : t=0.08mm OPEN APERTURE OF METAL MASK APPROX. 80% For TERMINAL APPROX. 120% For FITING NAIL C 0.05 C 0.19 DETAIL B SCALE 20:1 D C MATED CONDITION 10.15 11.71 8.40 9.96 6.65 8.21 B A 2024370603 2024370503 2024370403 ○ ○ ○ ------- 2 60 2 50 2 40 POWER EMBOSSED TAPE MASS PRODUCTION LOW VOL. TOOL (FITTING SIGNAL PACKAGE NAIL) SAMPLE PREPARATION B ○: TOOLED ORDER No. △: WORK IN PROCESS CIRCUIT ---: TOOLING TO BE CONFIRMED CONNECTOR SERIES No. : 202437 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 10:1 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 02:51:50 7 0.16 ±0.01 0.82 ±0.01 6 TERMINAL WIDTH 8 0.35 ±0.01 PITCH �0.32� 0.33 MIN. 2.30 MIN. 0.08 ±0.03 1. MATERIAL HOUSING : LIQUID CRYSTAL POLYMER UL94V-0(COLOR : BLACK) TERMINAL : COPPER ALLOY FITTING NAIL : COPPER ALLOY 2. PLATING TERMINAL : CONTACT AREA: SEPARAED GOLD PLATING (0.1 MICROMETER MINIMUM). SOLDER TAIL AREA: SEPARATED GOLD PLATING UNDER PLATING ： NICKEL OVERALL *DIVIDE INTO PARTS THE GOLD PLATING OF THE CONTACT AND THE TAIL PART BY THE NICKEL PLATING. FITTING NAIL : CONTACT AREA: SEPARAED GOLD PLATING (0.1 MICROMETER MINIMUM). SOLDER TAIL AREA: SEPARATED GOLD PLATING UNDER PLATING ： NICKEL OVERALL *DIVIDE INTO PARTS THE GOLD PLATING OF THE CONTACT AND THE TAIL PART BY THE NICKEL PLATING. *EVEN THOUGH GOLD PLATING ON THE TOP SURFACE OF NAIL MIGHT BE THIN, NO FUNCTIONAL PROBLEM. 3 APPLY FOR (CIRCUIT/2)=EVEN 4. MATE WITH : 2024360**3 5. TAIL AND FITTING NAIL COPLANARITY TO BE 0.08MAXIMUM. 6 PROHIBITED AREA OF PATTERN WIRING AND SOLDER. (FOR EACH AREA, THE WIRING THAT TOUCHES ON THE SOLDER CAN BE ATTACHED, THEN COVERED WITH A FILM TO KEEP SOLDER OUT.) DOCUMENT STATUS 0.35 ±0.01 6 B+1.9 MAX. �0.67� 6 A FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 0.25 MIN. P.W.BOARD PATTERN LAYOUT �REFERENCE� 0.25 ±0.05 TERMINAL WIDTH 0.71 ±0.01 (TAIL TO TAIL) TERMINAL WIDTH 6 B ±0.02 0.8 ±0.1 0.08 ±0.03 D NOTES ⌖ 0.15 X B 1 6 0.12 ±0.05 0.18 ±0.03 0.86 ±0.03 E 0.68 ±0.1 2.0 ±0.2 1.22 ±0.2 PITCH �0.31� PITCH .3 2� 0.175 0.7 ±0.1 0.35 PICK-UP AREA 3 0.35 ±0.03 �0.28� X B ±0.2 0.67 ±0.03 �0 A ±0.2 2 0.95 ±0.01 B ±0.03 1.42 ±0.03 F 3 1.37 ±0.01 0.93 ±0.03 4 0.445 ±0.01 5 6 TERMINAL 7 8 0.485 ±0.03 9 1.33 ±0.03 10 6 5 4 EC NO: 640065 DRWN: DGONDO CHK'D: MSASAO APPR: YNAITO INITIAL REVISION: DRWN: NOKIMOTO APPR: TKUSUHARA01 THIRD ANGLE PROJECTION 0.35 BB H=0.8 W2.3 HB8 PLUG ASSY 2020/06/19 2020/06/23 2020/06/23 DRAWING 2018/02/27 2018/11/30 SERIES PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2024371000 MATERIAL NUMBER CUSTOMER A3-SIZE 202437 3 GENERAL 2 PSD 002 C SHEET NUMBER 1 OF 1 1 A