2059571371

10 9 7 8 5 6 (C) (NAIL POSITION) (0.2) (NAIL THICKNESS) 1 材料及び仕上げ(めっき仕様)：TABLE 1, TABLE2 参照 MATERIAL AND FINISHES (PLATING SPECIFICATION) : SEE TABLE 1, TABLE2. 2 製品仕様書、コネクタ取扱説明書、適合嵌合相手、適合リテーナーはSHEET 5を ご参照下さい。 PLEASE REFER TO SHEET 5 FOR PRODUCT SPECIFICATION, APPLICATION SPECIFICATION, MATE WITH AND APPLICABLE RETAINER. ①ハウジング 　 HOUSING 4 偶数極に適合 APPLY TO EVEN CIRCUIT 5 発注番号：SHEET 5 参照 ORDER NUMBER : PLEASE REFER TO SHEET 5 　 NAIL 極数 CIRCUIT SIZE (1.25) (PITCH) 0 ナチュラル (白) NATURAL(WHITE) 1 黒 BLACK (0.625) ②ターミナル 4 Z D 　 TERMINAL 1 TABLE 1 番号 部品 NO. PART ① ハウジング HOUSING 材質 MATERIAL (HSG-NAIL) 12 (TERMINAL) SECTION Z-Z 0.65 ±0.1 C (0.06) (HSG-TERMINAL) (3.21) 1.5 ±0.1 (NAIL) 回路番号1 CIRCUIT 1 E 番号 ハウジングカラー NO. HOUSING COLOR 回路番号 N CIRCUIT N (0.4) F 205957**7* (3.55) 5.24 D ③ネイル Z 1 　 COVER TAPE 3. 端子テール部 及び ネイルの平坦度：0.1 MAXIMUM TAIL AND NAIL COPLANARITY TO BE 0.1 MAXIMUM (D) COVER TAPE (B) 回路番号1マーク CIRCUIT 1 MARK 2 注記： NOTES : A E 3 ④カバーテープ 4.59 F 4 10 8 ポリアミド(PA)、ガラス充填、UL94 V-0、色：SHEET 5 参照 POLYAMIDE (PA), GLASS FILLED, UL94 V-0, COLOR: SEE SHEET 5 7 黄銅 BRASS B ② ターミナル TERMINAL 5 錫ビスマスめっき TIN-BISMUTH PLATING：1.0 MICROMETER MINIMUM D ニッケルめっき(下地) NICKEL (UNDER-PLATING)：1.0 MICROMETER MINIMUM ネイル NAIL A ④ DOCUMENT STATUS DIMENSION UNITS SCALE mm NTS 錫めっき MATTE TIN PLATING：1.0 MICROMETER MINIMUM ANGULAR TOL ± 4 PLACES ± 0.2 ニッケルめっき(下地) NICKEL (UNDER-PLATING)：1.0 MICROMETER MINIMUM 3 PLACES ± 0.2 2 PLACES ± 0.2 P1 RELEASE DATE 9 2023/02/16 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:34 8 23.25 22 20.75 19.5 18.25 17 15.75 14.5 13.25 12 10.75 9.5 8.25 7 5.75 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 C B A 極数 CIRCUIT SIZE C B CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) カバーテープ ポリイミド COVER TAPE POLYIMIDE FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 18.75 17.5 16.25 15 13.75 12.5 11.25 10 8.75 7.5 6.25 5 3.75 2.5 1.25 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 黄銅 BRASS ③ 22.62 21.37 20.12 18.87 17.62 16.37 15.12 13.87 12.62 11.37 10.12 8.87 7.62 6.37 5.12 7 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: TAKAIKE APPR: AIDA THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW VERTICAL SMT PLUG ASSEMBLY FOR POTTING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/08/01 2019/08/20 DRAWING SERIES A3-SIZE 205957 3 2059573000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 D SHEET NUMBER 1 OF 5 1 A 10 製品形状 PRODUCT SHAPE 9 8 7 6 5 4 3 2 1 F F E E 2-3極 2-3 CIRCUIT 12-13極 12-13 CIRCUIT 4-11極 4-11 CIRCUIT 15-16極 15-16 CIRCUIT 14極 14 CIRCUIT D D 1.25 ±0.1 2.15 ±0.1 1.3 ±0.1 C 基板パターンレイアウト（参考） (参考：基板厚 1.6mm, メタルマスク厚さ 0.15mm, マスク開口率 100%) RECOMMEND PCB LAYOUT : COMPONENT SIDE (REFERENCE : PCB THICKNESS 1.6mm, STENCIL THICKNESS 0.15mm, APERTURE RATIO 100%) (A) (CONNECTOR) (2.5) (1.68) C DISTANCE FROM CONNECTOR OUTLINE TO NAIL PAD 基板パターンレイアウト PCB PATTERN LAYOUT 製品輪郭線 PART OUTLINE パターン禁止エリア RESTRICTED AREA NO PCB COMPONENTS ALLOWED ℄ OF (A) AND (B) B 3.97 ±0.1 B TYP.(2) (1.6) 1.2 ±0.1 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION A (0.4) TYP.(2) (B) CIRCUIT N CIRCUIT 1 DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2023/02/16 NTS ANGULAR TOL ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:34 8 SCALE mm 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 1.25 ±0.05 公差非累積 NON-ACCUMULATIVE 0.8 ±0.05 DIMENSION UNITS 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: TAKAIKE APPR: AIDA THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW VERTICAL SMT PLUG ASSEMBLY FOR POTTING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/08/01 2019/08/20 DRAWING SERIES A3-SIZE 205957 3 2059573000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 D SHEET NUMBER 2 OF 5 1 A 10 吸着エリア SUCTION AREA 9 8 7 5 ポッティング高さ POTTING HEIGHT 6 4 3 2 1 F F カバーテープ COVER TAPE ポッティング剤 POTTING AGENT (4.59) (3.4) 3 MAXIMUM (D) E E 嵌合状態図 MATED CONNECTORS (A) (5.3) D D 嵌合相手：204532シリーズ MATE WITH : 204532 SERIES (7.8) 2 C C (A) 2 リテーナー：214528シリーズ RETAINER : 214528 SERIES 2 嵌合相手：214526シリーズ MATE WITH : 214526 SERIES (5.3) B (8.85) (WITHOUT RETAINER) (10.9) (WITH RETAINER) B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DOCUMENT STATUS P1 RELEASE DATE 9 2023/02/16 NTS ANGULAR TOL ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:34 8 SCALE mm 7 6 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 DIMENSION UNITS 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: TAKAIKE APPR: AIDA THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW VERTICAL SMT PLUG ASSEMBLY FOR POTTING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/08/01 2019/08/20 DRAWING SERIES A3-SIZE 205957 3 2059573000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 D SHEET NUMBER 3 OF 5 1 A 10 9 7 8 4 引き出し方向 PULL OUT DIRECTION 引き出し方向 PULL OUT DIRECTION F 5 6 ⑦リール DETAIL W 　REEL (12) 3 2 1 送り穴のズレ量 0.05 MAXIMUM SKEW : 0.05 MAXIMUM 44mm幅テープ TAPE WIDTH: 44mm F 32mm幅テープ TAPE WIDTH: 32mm "P" (⌀ 10) ⌀ 1.5 +0.1 0 コネクタ CONNECTOR ±1 1.75 ±0.1 0°) (22) E (12 (2) (⌀ 21) 1.5 +0.1 0 0.2 ±0.05 (⌀ 13) DETAIL "P" Q D (2) エンボスポケット中心位置 CENTER OF EMBOSSED POCKET 　エンボステープ ⑤ 　　EMBOSSED TAPE 4 ±0.1 累積ピッチ : 40±0.2 ACCUMULATIVEPITCH: 40±0.2 R 0.75 +0.05 0 SECTION Q-Q 20.2 44±0.3 45.4 49.4 TYP.(2) 6. 梱包数量：1000個/リール 　NUMBER OF CONNECTORS : 1000 PCS/REEL 7. リードテープ長さ 　LEAD TAPE LENGTH. PULL OUT DIRECTION DETAIL W TOP TAPE BONDED PART.(EMPTY) トップテープリーダー部 TOP TAPE LEADER PART B 14.2 32±0.3 33.4 37.4 100 MIN. トップテープ接着部(空エンボス) 引き出し方向 部品挿入部 11.5 24+0.3 25.4 29.4 -0.1 末端部(空部) TAIL PART (EMPTY) COMPONENT SUPPLIER 160 MIN. 400 MIN. 7.5 8. トップテープの剥離強度はIEC60286-3に準拠 　TOP TAPE PEELING FORCE IS DEFINED BY IEC60286-3. 1 ⑤ ⑥ ⑦ 材質 MATERIAL ポリエチレン(PE), その他 POLYETHYLENE(PE), etc リール REEL ポリスチレン(PS) ＜リサイクル材を含む＞ POLYSTYRENE(PS) ＜RECYCLE MATERIAL CONTAINED＞ P1 RELEASE DATE 9 DIMENSION UNITS SCALE mm NTS 極数 CIRCUIT SIZE E F B CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) トップテープ TOP TAPE DOCUMENT STATUS G C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ポリスチレン(PS)、その他 エンボステープ EMBOSSED TAPE POLYSTYRENE(PS), etc FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 16+0.3 17.4 21.4 -0.1 H TABLE 2 番号 部品 NO. PART A 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 注記 NOTE C E 　TOP TAPE カバーテープ COVER TAPE F ±1 D ⑥ 　トップテープ 16mm幅テープ TAPE WIDTH: 16mm コネクタ 中心位置 CENTER OF CONNECTOR (H) Q 28.4 ±0.1 40.4 ±0.1 G E ⌀ 380 ± 2 ( ⌀ 80) 24mm幅テープ TAPE WIDTH: 24mm 2023/02/16 7 ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:34 8 ANGULAR TOL 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: TAKAIKE APPR: AIDA THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW VERTICAL SMT PLUG ASSEMBLY FOR POTTING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/08/01 2019/08/20 DRAWING SERIES A3-SIZE 205957 3 2059573000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 D SHEET NUMBER 4 OF 5 1 A 10 9 2 6 5 4 3 2 1 適合製品及び各種仕様書 APPLICABLE PRODUCTS AND VARIOUS SPECIFICATIONS 梱包仕様書 PACKAGING SPECIFICATION F 適合嵌合相手 MATE WITH F 2059579200-SPK PS 200 シリーズ番号 SERIES NUMBER 204532 214526 リテーナー対応 RETAINER APPLICABLE NOT COMPLIANT COMPLIANT - 214528 適合リテーナーシリーズ番号 APPLICABLE RETAINER SERIES NUMBER E 7 8 製品仕様書 PRODUCT SPECIFICATION 2045320001-PS PS 000 2145260001-PS PS 000 コネクタ取扱説明書 APPLICATION SPECIFICATION 5055650000-AS PS 000 E D D 205957**7* 発注番号一覧 ORDER NUMBER LIST 5 C B BLACK NATURAL (WHITE) 2059571671 2059571571 2059571471 2059571371 2059571271 2059571171 2059571071 2059570971 2059570871 2059570771 2059570671 2059570571 2059570471 2059570371 2059570271 2059571670 2059571570 2059571470 2059571370 2059571270 2059571170 2059571070 2059570970 2059570870 2059570770 2059570670 2059570570 2059570470 2059570370 2059570270 HOUSING COLOR 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 発注番号 ORDER NUMBER C B 極数 CIRCUIT SIZE 梱包形態：エンボステープ、リール PACKAGING STYLE：EMBOSSED TAPE AND REEL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2023/02/16 ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:34 8 ANGULAR TOL 7 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: TAKAIKE APPR: AIDA THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW VERTICAL SMT PLUG ASSEMBLY FOR POTTING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/08/01 2019/08/20 DRAWING SERIES A3-SIZE 205957 3 2059573000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 D SHEET NUMBER 5 OF 5 1 A