2077600671

10 9 7 8 5 6 4 3 2 1 注記： NOTES : 回路番号1マーク CIRCUIT 1 MARK F 1 材料及び仕上げ(めっき仕様)：TABLE 1, TABLE2 参照 MATERIAL AND FINISHES (PLATING SPECIFICATION) : SEE TABLE 1, TABLE2. 2 製品仕様書、コネクタ取扱説明書、適合嵌合相手、適合リテーナーはSHEET 5を ご参照下さい。 PLEASE REFER TO SHEET 5 FOR PRODUCT SPECIFICATION, APPLICATION SPECIFICATION, MATE WITH AND APPLICABLE RETAINER. ① ② ③ �B� Z (1.45) 回路番号1 CIRCUIT 1 4 極数／２＝偶数に適合 APPLY TO CIRCUIT SIZE / 2 = EVEN. 5 発注番号：SHEET 5 参照 ORDER NUMBER : PLEASE REFER TO SHEET 5 極数 CIRCUIT SIZE 番号 カバーテープ NO. COVER TAPE 7 回路番号2 CIRCUIT 2 (0.4) (0.625) (1.25) 有 WITH 8 (1.0) Z 無 WITHOUT 4 (PITCH) TERMINAL 0.65 ±0.15 D 回路番号N CIRCUIT N E 207760**** NAIL 回路番号N-1 CIRCUIT N-1 8.4 E 3. 端子テール部 及び ネイルの平坦度：0.12 MAXIMUM TAIL AND NAIL COPLANARITY TO BE 0.12 MAXIMUM (4.1) 0.65 ±0.15 A F 番号 ハウジングカラー NO. HOUSING COLOR 0 ナチュラル (白) NATURAL(WHITE) 1 黒 BLACK 2 赤 RED 3 黄 YELLOW 4 青 BLUE D 　 1 TABLE 1 部品 PART 番号 B NO. ① SECTION Z-Z (1.0) (C) (NAIL POSITION) (0.3) (NAIL TICKNESS) 材質 MATERIAL TERMINAL (0.1) (9.7) C 7.25 C ハウジング ポリアミド(PA)　UL94V-0 色：SHEET 5参照 HOUSING POLYAMIDE(PA) UL94V-0 COLOR : SEE SHEET 5 黄銅 BRASS ② 接点部、テール部めっき ターミナル CONTACT, TAIL PLATING TERMINAL 下地めっき UNDER PLATING ③ ネイル NAIL DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 錫ビスマスめっき：1.0 MICROMETER MINIMUM TIN-BISMUTH PLATING 下地めっき UNDER PLATING ニッケルめっき：1.0 MICROMETER MINIMUM NICKEL PLATING (UNDER PLATING) P1 RELEASE DATE 9 2023/02/16 7 SCALE mm NTS ANGULAR TOL ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:35 8 DIMENSION UNITS 13.65 12.4 11.15 9.9 9.55 8.3 14 12 10 8 6 4 C B A 極数 CIRCUIT SIZE B CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ニッケルめっき：1.0 MICROMETER MINIMUM NICKEL PLATING (UNDER PLATING) テール部めっき TAIL PLATING 7.5 6.25 5 3.75 2.5 1.25 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 錫ビスマスめっき：1.0 MICROMETER MINIMUM TIN-BISMUTH PLATING 黄銅 BRASS A 12.2 10.95 9.7 8.45 8.1 6.85 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: TENAGASE APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B DUAL ROW VERTICAL SMT PLUG ASSEMBLY FOR POTTING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/05/31 2020/01/16 DRAWING SERIES A3-SIZE 207760 3 2077600000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 C SHEET NUMBER 1 OF 5 1 A 10 製品形状 PRODUCT SHAPE 9 7 8 5 6 カラー & キー位置 (4, 6極) COLOR & KEY POSITION (4,6 CIRCUIT) F 極性キー POLARIZATION KEY 4 3 2 1 F 極性キー POLARIZATION KEY E E 207760***0 ナチュラル(白) NATURAL(WHITE) 4-6極 4-6 CIRCUIT 8-14極 8-14 CIRCUIT 基板パターンレイアウト PCB PATTERN LAYOUT (0.625) (PITCH) 4.8 ±0.1 TYP.(N) (1.0) 1.0 ±0.1 TYP.(2) TYP.(4) 基板パターンレイアウト（参考） (参考：基板厚 1.6mm, メタルマスク厚さ 0.15mm, マスク開口率 100%) RECOMMEND PCB LAYOUT : COMPONENT SIDE (REFERENCE : PCB THICKNESS 1.6mm, STENCIL THICKNESS 0.15mm, APERTURE RATIO 100%) パターン禁止エリア RESTRICTED AREA NO PCB COMPONENTS ALLOWED THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION TYP.(2) (3.1) OF 回路番号N CIRCUIT N A AND B DOCUMENT STATUS P1 RELEASE DATE 9 2023/02/16 回路番号2 CIRCUIT 2 SCALE mm NTS ANGULAR TOL ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:35 8 DIMENSION UNITS 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) (A) (CONNECTOR) FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 B 10.3 ±0.1 回路番号1 CIRCUIT 1 回路番号N-1 CIRCUIT N-1 TYP.(2) TYP.(N) 2.05 ±0.05 0.8 MINIMUM (1.8) TYP.(N) 1.6 ±0.05 1.6 ±0.05 C 製品輪郭線 PART OUTLINE A 207760***4 青 BLUE NON-ACCUMLATIVE B (8.4) 207760***3 黄 YELLOW 1.25 ±0.05 公差非累積 2.35 ±0.1 (8-14 CIRCUIT) 2.8 ±0.1 (4-6 CIRCUIT) (0.95) 207760***2 赤 RED B ±0.1 6 C D TYP.(2) D 207760***1 黒 BLACK 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: TENAGASE APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B DUAL ROW VERTICAL SMT PLUG ASSEMBLY FOR POTTING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/05/31 2020/01/16 DRAWING SERIES A3-SIZE 207760 3 2077600000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 C SHEET NUMBER 2 OF 5 1 A 10 吸着エリア SUCTION AREA 9 8 7 D ±0.4 F 5 6 嵌合状態図 MATED CONNECTORS 4 3 (A) Y 2 1 (9.7) F 1.59 (8.55) 8-14ckt (8.75) 4-6ckt 2 嵌合相手：204523シリーズ MATE WITH : 204523 SERIES E (4.4) (8.6) Y (9.2) E SECTION Y-Y カバーテープ無 WITHOUT COVER TAPE 207760 **7* 吸着高さ SUCTION HEIGHT 4.2 ±0.4 ④ X D D (A) 9.0 (9.7) 6.0 MAXIMUM (9.2) (WITHOUT RETAINER) ポッティング POTTING (WITH RETAINER) カバーテープ高さ COVER TAPE HEIGHT ポッティング高さ POTTING HEIGHT 基板 PCB TABLE2 部品 PART 番号 A NO. ④ 材質 MATERIAL カバーテープ ポリイミド COVER TAPE POLYIMIDE DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 2 嵌合相手：214527シリーズ MATE WITH : 214527 SERIES 8.75 7.5 6.25 5 3.75 2.5 14 12 10 8 6 4 無 WITHOUT D 極数 CIRCUIT SIZE カバーテープ COVER TAPE B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 1 リテーナー：214528シリーズ RETAINER : 214528 SERIES C SECTION X-X カバーテープ有 WITH COVER TAPE 207760 **8* B 2 (7.4) X (11.25) C (8.55) (8-14 CIRCUIT) RELEASE DATE 9 2023/02/16 ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:35 8 ANGULAR TOL 7 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: TENAGASE APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B DUAL ROW VERTICAL SMT PLUG ASSEMBLY FOR POTTING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/05/31 2020/01/16 DRAWING SERIES A3-SIZE 207760 3 2077600000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 C SHEET NUMBER 3 OF 5 1 A 10 9 7 8 5 6 4 3 2 1 F F ⑦ リール REEL 引き出し方向 PULL OUT DIRECTION ⌀ 380 ±2 引き出し方向 PULL OUT DIRECTION (⌀10) ポケット中心位置 CENTER OF POCKET E (16) (PITCH) TOP TAPE (2) (22) コネクタ CONNECTOR ⑥ トップテープ (120°) Y (⌀21) (11.5) コネクタ 中心位置 CENTER OF CONNECTOR DETAIL Y 24 +0.3 -0.1 D D 注記　NOTES ⑤ 6. 梱包数量　：　500個/リール NUMBER OF CONNECTORS : 500 PIECES/REEL. 7. リードテープ長さ LEAD TAPE LENGTH トップテープ接着部（空部） 100 MIN. TOP TAPE BONDED PART(EMPTY) (0.5) ⌀ 1.5 +0.1 0 1.75 ±0.1 25.4 ±1.0 29.4 ±1.0 エンボステープ EMBOSSED TAPE C E (7.8) (2) 4 ±0.1 累積ピッチ: 40 ±0.2 ACCUMLATIVE PITCH C (PITCH) 引き出し方向 PULL OUT DIRECTION 部品挿入部 COMPONENT SUPPLIER 400 MINIMUM 末端部(空部) TAIL PART (EMPTY) 160 MINIMUM 8. トップテープの剥離強度については、IEC60286-3に準拠 TOP TAPE PEELING FORCE IS DEFINED BY IEC60286-3. B B 1 TABLE3 部品 PART 番号 NO. ⑤ A ⑥ ⑦ THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 材質 MATERIAL DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) ポリスチレン(PS) POLYSTYRENE(PS) ANGULAR TOL ± 4 PLACES ± 0.2 トップテープ TOP TAPE ポリエチレン(PE)、その他 POLYETHYLENE(PE), etc 3 PLACES ± 0.2 2 PLACES ± 0.2 リール REEL ポリスチレン(PS)＜リサイクル材を含む＞ POLYSTYRENE(PS) ＜RECYCLE MATERIAL CONTAINED＞ エンボステープ EMBOSSED TAPE DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2023/02/16 7 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:35 8 CURRENT REV DESC: 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: TENAGASE APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B DUAL ROW VERTICAL SMT PLUG ASSEMBLY FOR POTTING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/05/31 2020/01/16 DRAWING SERIES A3-SIZE 207760 3 2077600000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 5 2 GENERAL PSD 000 C SHEET NUMBER 4 OF 5 1 A 10 9 2 6 5 4 3 2 1 適合製品及び各種仕様書 APPLICABLE PRODUCTS AND VARIOUS SPECIFICATIONS 梱包仕様書 PACKAGING SPECIFICATION F 適合嵌合相手 MATE WITH F 2077609200-SPK PS 200 シリーズ番号 SERIES NUMBER 204523 214527 リテーナー対応 RETAINER APPLICABLE NOT COMPLIANT COMPLIANT (NATURAL, BLACK) - 214528 適合リテーナーシリーズ番号 APPLICABLE RETAINER SERIES NUMBER E 7 8 製品仕様書 PRODUCT SPECIFICATION 2045230001-PS PS 000 2145270001-PS PS 000 コネクタ取扱説明書 APPLICATION SPECIFICATION 5054320000-AS PS 000 E D D 207760**** 発注番号一覧 ORDER NUMBER LIST NOT COMPLIANT COMPLIANT RED YELLOW BLACK NATURAL (WHITE) 5 BLUE --------2077600684 2077600484 --------2077600674 2077600474 C B --------2077600683 2077600483 --------2077600673 2077600473 --------2077600682 2077600482 --------2077600672 2077600472 2077601481 2077601281 2077601081 2077600881 2077600681 2077600481 2077601471 2077601271 2077601071 2077600871 2077600671 2077600471 LOW HALOGEN HOUSING COLOR 2077601480 2077601280 2077601080 2077600880 2077600680 2077600480 2077601470 2077601270 2077601070 2077600870 2077600670 2077600470 14 12 10 8 6 4 14 12 10 8 6 4 発注番号 ORDER NUMBER C WITH WITHOUT B 極数 カバーテープ CIRCUIT COVER TAPE SIZE 梱包形態 PACKAGING STYLE エンボステープ、リール　EMBOSSED TAPE AND REEL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2023/02/16 ± 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 3.0 ° 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:22:35 8 ANGULAR TOL 7 6 5 4 EC NO: 736271 DRWN: SOKUMURA01 CHK'D: SAKIYAMA APPR: AIDA INITIAL REVISION: DRWN: TENAGASE APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2022/12/27 2023/02/16 2023/02/16 MICRO-LOCK PLUS 1.25 W/B DUAL ROW VERTICAL SMT PLUG ASSEMBLY FOR POTTING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/05/31 2020/01/16 DRAWING SERIES A3-SIZE 207760 3 2077600000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 C SHEET NUMBER 5 OF 5 1 A