212134-0006

10 9 7 8 4 3 2 1 トレードマーク TRADE MARK F キャビティ&金型番号 CAV&MOLD No CIRCUIT 1 A F CIRCUIT N 1 ハウジング HOUSING (B) (0.07) E 5 6 注記 NOTES (0.02) 材料および仕上げ(めっき仕様) MATERIAL AND FINISHES: SEE TABLE 1 2. 製品仕様書：2121320000-PS/PS /000 　 PRODUCT SPECIFICATION: 2121320000-PS/PS/000 3. 梱包形態 SHEET 3 参照 PACKAGING INFORMATION : SEE SHEET 3 4. 嵌合相手：212132シリーズ 　MATE WITH:212132 SERIES 5. アプリケーション仕様書(コネクタ取扱い説明書)：2166940000-AS/PS/000 　 APPLICATION SPECIFICATION(CONNECTOR MANUAL) : 2166940000-AS/PS/000 6. 端子テール部及びネイルの平坦度:0.1 MAX. 　TAIL AND NAIL COPLANARITY TO BE 0.1 MAX. 7　 極数 ＝ 偶数に適用 　APPLY FOR CIRCUIT SIZE = EVEN 1 (4.79) 4.72 (0.38) TERMINAL 2 ターミナル TERMINAL 3 ネイル NAIL D (0.02) 1.0 (PITCH) (0.5) (0.44) NAIL 7 E D C (0.3) TERMINAL 1 1 TABLE 1 材質 MATERIAL ハウジング ポリアミド(PA)ガラス入り, UL94V-0, 色：黒 HOUSING POLYAMIDE(PA) GLASS FILLED, UL94V-0, COLOR : BLACK 銅合金 COPPER ALLOY B 2 下地めっき ターミナル UNDER PLATING TERMINAL 接点部 CONTACT テール TAIL A (0.2) NAIL 部品 PART 番号 NO. 推奨吸着エリア RECOMMENDED VACUUM AREA FOR CHIP MOUNTER SUCTION NOZZLE (0.87) 1.2 (C) 3 ネイル NAIL DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 ニッケルめっき(下地)：1.0 micro-meters MIN NICKEL (UNDER PLATING) 金めっき：0.1 micro-meters MIN GOLD PLATING 金めっき GOLD PLATING SCALE mm NTS ± 3.0 ° 4 PLACES ± 0.2 下地めっき UNDER PLATING ニッケルめっき(下地)：1.0 micro-meters MIN NICKEL (UNDER PLATING) 3 PLACES ± 0.2 2 PLACES ± 0.2 めっき PLATING 錫めっき : 1.0 micro-meters MIN MATTE TIN PLATING 9 2020/09/17 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 06:07:18 8 5 7.9 6 5.9 4 6.9 5 4.9 3 5.9 4 3.9 2 4.9 3 2.9 1 3.9 2 C B A 極数 CIRCUIT SIZE B CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL RELEASE DATE 6.9 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 黄銅 BRASS P1 C 7 6 5 4 PICO-EZMATE PLUS 1.0 W/B PLUG ASSEMBLY FOR GENERAL EC NO: 643659 DRWN: SNAKAMURA08 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: SNAKAMURA08 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2019/03/18 2020/09/17 2020/09/17 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/03/18 2020/09/17 DRAWING SERIES A3-SIZE 212134 3 2121340000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 3 2 GENERAL PSD 000 A SHEET NUMBER 1 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 F F 嵌合相手 : 212132 シリーズ MATE WITH 212132 SERIES (B) 1.0 (PITCH) CIRCUIT 1 CIRCUIT N 0.7 ±0.05 TYP. (0.3) E 製品輪郭線 CONNECTOR OUTLINE パターンおよび はんだ禁止エリア RESTRICTED AREA NO PCB COMPONENTS ALLOWED 0.8 ±0.05 TYP. OUTLINE TO PAD EDGE DISTANCE FROM CONNECTOR E (0.28) (A) D TYP.(2) (4.72) 4 ±0.05 D PCB (1.2) (4.79) 0.55 ±0.05 TYP.(2) OUTLINE TO PAD EDGE B DISTANCE FROM CONNECTOR (0.2) TYP.(2) C 0.8 ±0.05 C 嵌合図 1.025 ±0.05 MATED CONNECTORS TYP.(2) B 推奨基板レイアウト : 実装面側 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION (参考：基板厚1.0mm, メタルマスク厚さ0.1mm, マスク開口率100％) POLARIZED RECOMMENDED PCB LAYOUT : COMPONENT SIDE (REFERENCE: PCB THICKNESS 1.0mm, STENCYL THICKNESS 0.1mm, APERTURE RATIO 100%) DOCUMENT STATUS P1 RELEASE DATE 9 2020/09/17 NTS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 06:07:18 8 SCALE mm 7 6 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 DIMENSION UNITS 5 4 PICO-EZMATE PLUS 1.0 W/B PLUG ASSEMBLY FOR GENERAL EC NO: 643659 DRWN: SNAKAMURA08 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: SNAKAMURA08 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2019/03/18 2020/09/17 2020/09/17 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/03/18 2020/09/17 DRAWING SERIES A3-SIZE 212134 3 2121340000-SD MATERIAL NUMBER CUSTOMER SEE SHEET 3 2 GENERAL PSD 000 A SHEET NUMBER 2 OF 3 1 A 10 9 7 8 F 4 3 引き出し方向 PULL OUT DIRECTION 6 リール REEL 引き出し方向 5 6 2 5 トップテープ TOP TAPE PULL OUT DIRECTION A D 21.4 ±1.0 (120 °) (22) (2) (⌀21) コネクタ中心位置 CENTOR OF CONNECTOR �7.5� 17.4 ±1.0 D エンボスポケット中心位置 CENTER OF EMBOSSED POCKET 推奨吸着エリア中心位置 CENTER OF RECOMMENDED VACUUM AREA 累積ピッチ:40±0.2 ACCUMULATIVE PITCH 10. トップテープの剥離強度はIEC60286-3に準拠。 　 TOP TAPE PEELING FORCE IS DEFINED BY IEC60286-3. 11. 梱包仕様書 : 2121349200-SPK/PS/000 PACKEGING SPECIFICATION : 2121349200-SPK/PS/000 TOP TAPE LEADER PART 末端部(空部) 400mm MIN. 部品 PART 番号 NO. A 製品収納部 PRODUCT STRAGE AREA TAIL PART (EMPTY) 160mm MIN. 2121340006 6 2121340005 5 2121340004 4 2121340003 3 2121340002 2 梱包形態：エンボスリール PACKAGING STYLE : EMBOSSED TAPE AND REEL 極数 CIRCUIT SIZE 材質 MATERIAL SCALE mm NTS ポリスチレン (PS),その他 POLYSTYRENE(PS), etc ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 ポリエチレン(PE)、その他 POLYETHYLENE(PE), etc 3 PLACES ± 0.2 5 トップテープ TOP TAPE 2 PLACES ± 0.2 リール REEL ポリスチレン(PS) POLYSTYRENE(PS) DOCUMENT STATUS P1 RELEASE DATE 9 2020/09/17 7 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 06:07:18 8 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) エンボステープ EMBOSSED TAPE FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 4 6 C 発注番号 ORDER No. PULL OUT DIRECTION トップテープリーダー部 SECTION A-A (0.06) 引き出し方向 B (1.7) (2) 4 ±0.1 TOP TAPE BONDED PART(EMPTY) (0.3) A (⌀ 1.5) DETAIL "A" NOTES 8. 梱包数量 : 7000個/リール 　　NUMBER OF CONNECTORS : 7000 PIECES/REEL 9. リードテープ長さ 100mm MIN. 　　LEAD TAPE LENGTH トップテープ接着部(空部) F コネクタ CONNECTOR (⌀13) C 4 エンボステープ EMBOSSED TAPE E 1.75 ±0.1 "A" (⌀10) エンボステープ幅 WIDTH OD EMBOSSED TAPE 16 +0.3 -0.1 E ( ⌀ 80) ⌀ 380 ± 2 8 ±0.1 1 6 5 4 PICO-EZMATE PLUS 1.0 W/B PLUG ASSEMBLY FOR GENERAL EC NO: 643659 DRWN: SNAKAMURA08 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: SNAKAMURA08 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2019/03/18 2020/09/17 2020/09/17 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/03/18 2020/09/17 DRAWING SERIES A3-SIZE 212134 3 2121340000-SD MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 000 A SHEET NUMBER 3 OF 3 1 A